2020 NISSAN X-TRAIL interior


> (GLW    0RGHO 7$@
4-26
Display screen,heaterandaircondition er,and audio system
SIDE VENTILA TORS
T32A1308 27-14E8E99 F-99CC-412 8-B741-5C6C32DD484 6
JVH0663X
Open/close thevents bymoving thecontrol toeither
direction.
: Thissymbol indicates thatthevents are
open. Moving thecontrol tothis direction
will open thevents.
: Thissymbol indicates thatthevents are
closed. Moving thecontrol tothis direction
will close thevents.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthedesired
position isachieved.
REAR VENTILA TORS (ifequipped)
T32A1308 27-09DDAF C4-C01B-4AF0-8E56- 8D67AECF ADB2
JVH0879X
Open/close thevents bymoving thecontrol toeither
direction.
: Thissymbol indicates thatthevents are
open. Moving theside control tothis
direction willopen thevents.
: Thissymbol indicates thatthevents are
closed. Moving theside control tothis
direction willclose thevents.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthedesired
position isachieved.
T32A130 827-B6B49E 34-3817-4359-BDE6-6C 6EB1F60D3D
WARNING:
. The heater andairconditioner operateonly
when theengine isrunning.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalinjuries topeople or
animals.
. Donot use therecirculation modeforlong
periods asitmay cause theinterior airto
become staleandthewindows tofog up.
. Donot adjust theheating andaircondition-
ing controls whiledriving sothat fullatten-
tion may begiven tovehicle operation.
The heater andairconditioner operatewhenthe
engine isrunning. Theairblower willoperate evenif
the engine isturned offand theignition switchis
placed inthe ªONº position.
NO TE:
. Odors frominside andoutside thevehicle
can build upinthe airconditioner unit.Odor
can enter thepassenger compartment
through thevents.
. When parking, setthe heater andaircondi-
tioner controls toturn offairrecirculation to
allow freshairinto thepassenger compart-
ment. Thisshould helpreduce odorsinside
the vehicle.
HEA TER AND AIRCONDIT IONER
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Push theªMAX A/Cºbutton againtoturn offthe MAX
A/C mode. WhentheMAX A/Cmode isturned off,
most ofthe settings willreturn tothe previous state,
while theindicator lightonthe ªA/Cº button willstay
on.
Heater operation
T32A1308 27-412153F7-6002-44 0B-857B-25C8DA4A03 B9
Heating:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode isused todirect heated airfrom thefoot
outlets.
1. Push theairrecirculation ª
º button fornormal
heating. (Theindicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
V entilation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode directs outside airfrom theside andcenter
ventilators.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position. Defrosting
ordefogging:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode directs theairtothe defogger outletsto
defrost/defog thewindows.
1. Turn thefanspeed control ª
º dial tothe
desired position.
2. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
3. Push thefront defogger ª
º button. (The
indicator lightwillturn on.)
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
T o remove frostfromthewindshield quickly,turn
the temperature controldialtothe maximum hot
(right) position andthefanspeed control ª
º
dial tothe maximum position.
Heating anddefogging:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode heatstheinterior anddefogs thewindows.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe maximum
hot (right) position.
Air conditioner operation
T32A1308 27-8C9750 4D-2DD0-4F8 E-8F69-8C25B837FB86
The airconditioner systemshouldbeoperated for
approximately 10minutes atleast once amonth. This
helps prevent damage tothe airconditioner system
due tothe lack oflubrication.
Cooling:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode isused tocool anddehumidify theair.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button. (Theindicator lightwillturn
on.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthecool (left)
position.
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction.
Dehumidified heating:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode isused toheat anddehumidify theair.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button. (Theindicator lightwillturn
on.)
Display screen,heaterandairconditioner ,and audio system
4-29
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Air flow control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairflow control buttons toselect theairflow
outlets. Morethanoneairflow control buttoncanbe
selected atatime.
Ð Airflows mainly fromcenter andside
ventilators.
Ð Airflows mainly fromthefoot outlet.
Ð Airflows mainly fromthefront defogger.
MAX defogging/defrosting:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push thefront defogger ª
MAXº button toturn on
the MAX defogging/defrosting modeandquickly
defog/defrost thewindshield. Whenthismode is
turned on,the ªA/Cº indicator lightwillturn onand
the aircirculation willbefixed atthe outside air
circulation mode.Theª
º indicator lightwillalso
turn on.For thebest performance, turnthetemperature
control dialtothe maximum hotposition andsetthe fan
speed atits maximum.
Outside aircirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairrecirculation ª
º button. (Theindicator
light willturn off.)Theairflow isdrawn fromoutside the
vehicle.
Select theoutside aircirculation modefornormal
heating orair conditioning operation.
Air recirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairrecirculation ª
º button. (Theindicator
light willilluminate.)
The airwill recirculate insidethevehicle.
A/C (AirConditioner) operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
Heater operation
GUID-27D 496D2-F250 -415F-9ECB-62699E32F467
Heating:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode isused todirect heated airfrom thefoot
outlets.
1. Push theairrecirculation ª
º button fornormal
heating. (Theindicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
V entilation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode directs outside airfrom theside andcenter
ventilators.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
Heating anddefogging:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode heatstheinterior anddefogs thewindows.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º and ª
º buttons. (The
indicator lightswillturn on.) 3.
Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
Air conditioner operation
GUID-67E 5EEF5-BEB9-4 0BA-B38F-36756478 81AC
The airconditioner systemshouldbeoperated for
approximately 10minutes atleast once amonth. This
helps prevent damage tothe airconditioner system
due tothe lack oflubrication.
Cooling:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode isused tocool anddehumidify theair.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button. (Theindicator lightwillturn
on.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthecool (left)
position.
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction.
Dehumidified heating:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This mode isused toheat anddehumidify theair.
1. Push theairrecirculation ª
º button. (The
indicator lightwillturn off.)
2. Push theª
º button. (Theindicator lightwill
turn on.)
Display screen,heaterandairconditioner ,and audio system
4-31
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-90
Display screen,heaterandaircondition er,and audio system
Giving voicecommands
GUID-6F F5F905-247 7-4A3E-8D69-6D6688 FC945D
T o operate voicerecognition, pushandrelease
the
button located onthe steering wheel.After
the tone sounds, speakacommand.
The command givenispicked upbythe microphone,
and voice feedback isgiven when thecommand is
accepted.
. Ifyou need tohear theavailable commands forthe
current menuagain, sayªHelpº andthesystem will
repeat them.
. Ifacommand isnot recognized, thesystem
announces, ªCommandnotrecognized. Please
try again.º Makesurethecommand issaid exactly
as prompted bythe system andrepeat the
command inaclear voice.
. Ifyou want togo back tothe previous command,
you can sayªGo backº orªCorrectionº anytime
the system iswaiting foraresponse.
. You can cancel acommand whenthesystem is
waiting foraresponse bysaying, ªCancelº or
ªQuit.º Thesystem announces ªCancelºandends
the VRsession. You can also push andhold the
button onthe steering wheelfor5seconds
at any time toend theVRsession. Whenever the
VR session iscancelled, adouble beepisplayed
to indicate youhave exited thesystem.
. Ifyou want toadjust thevolume ofthe voice
feedback, pushthe(
- or
+) button on
the steering wheelwhilebeing provided with
feedback. You can also usetheradio volume
control knob. V
oice Prompt Interrupt :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
In most cases youcan interrupt thevoice feedback to
speak thenext command bypushing the
button
on the steering wheel.Afterinterrupting thesystem,
wait forabeep before speaking yourcommand.
One Shot Call:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o use thesystem faster,youmay speak thesecond
level commands withthemain menu command onthe
main menu. Forexample, pushthe
button and
after thetone say,ªCall Redialº .
Operating tips:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o get thebest performance outofthe voice
recognition system,observe thefollowing:
. Keep theinterior ofthe vehicle asquiet as
possible. Closethewindows toeliminate sur-
rounding noises(trafficnoises, vibration sounds,
etc.) ,which mayprevent thesystem fromrecog-
nizing voicecommands correctly.
. Wait until thetone sounds beforespeaking a
command. Otherwise, thecommand willnot be
received properly.
. Start speaking acommand within5seconds after
the tone sounds.
. Speak inanatural voicewithout pausing between
words.
V oice commands
GUID-7CCBC EC6-67F0-42B2-B2C0-8F3F10B6AB6 7
V oice commands canbeused tooperate theBlue-
tooth


> (GLW    0RGHO 7$@
USING THESYSTEM
GUID-18 526230-86 E8-4B94-A0C 9-2C3C60876ABC
Initialization
GUID-4DB66 233-DA94-47 98-B89D-E43157E3B80 7
When theignition switchisin the ON position, the
V oice Recognition systemisinitialized, whichtakesa
few seconds. Whencompleted, thesystem isready to
accept voicecommands. Ifthe
button ispushed
before theinitialization completes,thesystem will
announce thatthesystem isnot ready forvoice
recognition session.
Giving voicecommands
GUID-11F23 A36-ED43-4E0E-B383 -08EBBEDF1DA3
1. Push the
button.
2. Thesystem announces andprompts youtospeak
a command. Alist ofavailable commands isthen
spoken bythe system.
3. After thetone sounds andtheface icononthe
display changes, speakacommand. Available
commands arediscussed laterinthis section.
4. Voice anddisplay feedback areprovided whenthe
command isaccepted.
. Push the
button onthe instrument panelto
return tothe previous screen.
. Ifthe command isnot recognized, thesystem
announces providesalist ofavailable selections.
. Ifyou want tocancel thecommand orgo back to
the previous menuofcommands, pushthe
button.
. Push the
button tomove backthrough the
menus displayed onthe screen.
. Ifyou want toadjust thevolume ofthe voice
feedback, usethevolume controlswitches onthe
steering wheelorthe Power/VOLUME dialonthe
control panel. Operation
onthe control paneldisplay:
The voice command screencanalso beaccessed
using thecontrol paneldisplay
1. Push theINFO button onthe control panel.
2. Touch theªVoice Commandsº key.
Operating tips
GUID-32 D2D1E9-C53 4-45C4-B437-266D2AEAB 66A
T o get thebest performance outofthe Voice
Recognition system,observe thefollowing:
. Keep theinterior ofthe vehicle asquiet as
possible. Closethewindows toeliminate the
surrounding noises(trafficnoises, vibration
sounds, etc.),which mayprevent thesystem from
recognizing thevoice commands correctly.
. Wait until atone sounds beforespeaking a
command. Otherwise, thecommand willnot be
received properly.
. Start speaking acommand within3.5seconds
after thetone sounds.
. Speak inanatural voicewithout pausing between
words.
S YSTEM FEATURES
GUID-731 61CD3-EC39- 47E3-BAD6-F422DB5B0 657
JVH0865X
The Voice Recognition systemcanactivate thefollowing
systems:
. Bluetooth


> (GLW    0RGHO 7$@
GUID-A467 6F80-7282-4 B00-8821-9F149B55F8E E
PRECAUTIONS ONPUSH-BUTT ONIGNI-
TION SWITCHOPERA TION
GUID-086 E9D42-2B5 5-4695-AC49-9675494A70E1
WARNING:
Do not operate thepush-button ignitionswitch
while driving thevehicle exceptinan emergency.
(The engine willstop when theignition switchis
pushed 3consecutive timesorthe ignition
switch ispushed andheld formore than2
seconds.) Thesteering wheelwilllock andcould
cause thedriver tolose control ofthe vehicle.
This could result inserious vehicledamage or
personal injury.
Before operating thepush-button ignitionswitch,be
sure tomove theshift lever tothe ªPº (Park) position
(for Continuously Variable Transmission model)orthe
shift lever tothe ªNº (Neutral) position(forManual
T ransmission model).
INTELLIGENT KEYSYSTEM
GUID-116 21F56-5195- 4DE6-92E0-5 AFEC5B4DC1F
The Intelligent Key system canoperate theignition
switch without takingthekey outfrom yourpocket or
bag. Theoperating environment and/orconditions may
affect theIntelligent Key system operation. Some
indicators andwarnings foroperation aredisplayed
on the vehicle information displayand/orinthe meter.
(See ªVehicle information displayº(P.2-20) and
ªW arning/indicator lightsandaudible remindersº
(P .2-12) .)
CAUTION:
. Besure tocarry theIntelligent Keywith you
when operating thevehicle.
. Never leavetheIntelligent Keyinside the
vehicle whenyouleave thevehicle. .
Ifthe vehicle battery isdischarged, the
ignition switchcannot beswitched from
the ªLOCKº position, andifthe steering lock
is engaged, thesteering wheelcannot be
moved. Chargethebattery assoon as
possible. (SeeªJump startingº (P.6-8) .)
Operating range
GUID-6DCA9 273-95BE-404D-9DED-C 3ABB1547B7 E
SSD0436
The Intelligent Key can only beused forstarting the
engine whentheIntelligent Key iswithin thespecified
operating range
*
1
.
When theIntelligent Key battery isalmost discharged
or strong radiowaves arepresent neartheoperating
location, theIntelligent Key system's operating range
becomes narrowerandmay notfunction properly.
If the Intelligent Key iswithin theoperating range,itis
possible foranyone, evensomeone whodoes notcarry
the Intelligent Key ,to push theignition switchtostart
the engine.
. The luggage roomareaisnot included inthe
operating range,buttheIntelligent Keymay
function.
. Ifthe Intelligent Key isplaced onthe instrument
panel, insidetheglove box,door pocket orthe
corner ofthe interior compartment, theIntelligent K
ey may notfunction.
. Ifthe Intelligent Key isplaced nearthedoor or
window outsidethevehicle, theIntelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-48 46178B-012D -41FF-8D9A-4 B56BC7ED0EE
The ignition lockisdesigned sothat theignition switch
cannot beswitched tothe ªLOCKº position untilthe
shift lever ismoved tothe ªPº (Park) position.
When theignition switchcannot beswitched tothe
ªL OCKº position:
1. ªShift toParkº warning appears onthe vehicle
information displayandachime sounds.
2. Move theshift lever tothe ªPº (Park) position.
3. Push theignition switch.Theignition switchis
switched tothe ªOFFº position.
4. Open thedoor. Theignition switchturnstothe
ªL OCKº position.
For warnings andindicators onthe vehicle information
display ,see ªVehicle information displayº(P.2-20) .
If the ignition switchisswitched tothe ªLOCKº
position, theshift lever cannot bemoved fromtheªPº
(Park) position. Theshift lever canbemoved ifthe
ignition switchisin the ªONº position withthefoot
brake pedaldepressed.
Starting anddriving
5-9
PUSH-BUT
TON IGNITION SWITCH
(model withIntelligent Keysystem)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
ENTER buttontoselect ªLaneº andpress the
ENTER button.
TEMPORAR YDISABLED STATUS AT HIGH
TEMPERA TURE
GUID-67A7 ECBE-6ACC- 40A7-9D0F-1C44280C8D 44
If the vehicle isparked indirect sunlight underhigh
temperature conditions(overapproximately 408C
(1048F) andthen started, theLDW system maybe
deactivated automatically .The ªHigh cabintempera-
tureº warning message willappear inthe vehicle
information display.
When theinterior temperature isreduced, theLDW
system willresume operating automatically .
MUL TI-SENSING CAMERAUNITMAINTE-
NANCE
GUID-C19 E3F82-C5B C-4AC8-B5 4F-DD97FCD DFBCC
JVI0975X
The multi-sensing cameraunit
*
1
for the LDW system
is located onthe windshield infront ofthe inside
rearview mirror.To maintain theproper operation ofthe
LDW system andprevent asystem malfunction besure
to observe thefollowing:
. Always keepthewindshield clean.
. Donot attach asticker (including transparent
material) orinstall anaccessory nearthemulti-
sensing lanecamera unit. .
Donot place reflective materials, suchaswhite
paper oramirror, onthe instrument panel.The
reflection ofsunlight mayadversely affectthe
multi-sensing cameraunit'sdetection capability.
. Donot strike ordamage theareas around the
camera unit.Donot touch thecamera lensor
remove thescrew located onthe camera unit.If
the camera unitisdamaged duetoan accident,
contact aNISSAN dealer.
GUID-790 A193B-4EB1 -4E55-89F5-8BFBAFBA 326A
The speed limiterallows youtoset the desired vehicle
speed limit.While thespeed limiterisactivated, the
driver canperform normalbraking andacceleration,
but thevehicle willnot exceed thesetspeed.
WARNING:
. Always observe postedspeedlimits.Donot
set the speed overthem.
. Always confirm thesetting statusofthe
speed limiter onthe vehicle information
display.
When thespeed limiterison, the cruise control system
cannot beoperated.
SPEED LIMITER OPERATIONS
GUID-7D727D 12-89FC-4770-A277-89 9333D04B46
The speed limitercanbeset ataspeed between 30to
200 km/h (20to124 MPH)
.
JVS0427X
The speed limitersetswitches arelocated onthe
steering wheel.
1. CANCEL switch
2. RES/+ switch
3. SET/


> (GLW    0RGHO 7$@
5-50
Starting anddriving
GUID-B933B 47B-826E-4EDF-9FFF-A 382A0D7D 08E
SSD0723
T ype A
JVS0437X
T ype B
The parking sensor(sonar) systemsounds atone to
inform thedriver ofobstacles nearthebumper.
When theªDisplayº keyisON, thesensor viewwill
automatically appearinthe vehicle information display.
WARNING:
. The parking sensor(sonar) systemisa
convenience butitis not asubstitute for
proper parking. Thedriver isalways respon-
sible forsafety during parking andother
manoeuvres. Alwayslookaround andcheck
that itis safe todo sobefore parking. .
Read andunderstand thelimitations ofthe
parking sensor(sonar) system ascontained
in this section. Thecolors ofthe corner
sensor indicator andthedistance guidelines
in the front (ifequipped)/rear viewindicate
different distances tothe object. Inclement
weather orultrasonic sourcessuchasan
automatic carwash, atruck's compressed-
air brakes orapneumatic drillmay affect the
function ofthe system; thismay include
reduced performance orafalse activation. .
This function isdesigned asan aid tothe
driver indetecting largestationary objectsto
help avoid damaging thevehicle. Thesystem
is not designed toprevent contactwithsmall
or moving objects. Alwaysmoveslowly.
. The system willnotdetect smallobjects
below thebumper, andmay notdetect
objects closetothe bumper oron the
ground.
. The system maynotdetect thefollowing
objects.
Ð Fluffy objects suchassnow, cloth,
cotton, glass-wool, etc.
Ð Thin objects suchasrope, wireand
chain, etc.
Ð Wedge-shaped objects
. Ifyour vehicle sustains damagetothe
bumper fascia,leaving itmisaligned orbent,
the sensing zonemaybealtered causing
inaccurate measurement ofobstacles or
false alarms.
CAUTION:
. Keep theinterior ofthe vehicle asquiet as
possible tohear thetone clearly.
. Keep thesensors (located onthe bumper
fascia) freefrom snow, iceand large accu-
mulations ofdirt. Donot clean thesensors
with sharp objects. Ifthe sensors are
covered, theaccuracy ofthe sensor function
will bediminished.
P ARKING SENSOR (sonar)SY STEM
(if equipped)
&RQGLWLRQ
([FHSWIRU&KLQD