2020 NISSAN X-TRAIL belt


> (GLW    0RGHO 7$@
1-2
Safety Ðseats, seatbelts andsupplement alrestraint system
T32A1308 27-544A337 B-5822-4F19 -AD26-8D99DEA6015 1
SSS0133A
WARNING:
. Donot drive and/or rideinthe vehicle with
the seatback reclined.Thiscanbedanger-
ous. Theshoulder beltwillnotbeproperly
against thebody. Inan accident, youand
your passengers couldbethrown intothe
shoulder beltandreceive neckorother
serious injuries. You and your passengers
could alsoslide under thelapbelt and
receive serious injuries.
. For themost effective protection whilethe
vehicle isin motion, theseatback shouldbe
upright. Alwayssitwell back inthe seat and
adjust theseat beltproperly. (SeeªSeat
beltsº (P.1-9) .)
CAUTION:
When adjusting theseat positions, besure not
to contact anymoving partstoavoid possible
injuries and/ordamages.
FRONT SEATS
T32A1308 27-F0BDEADE-E0E8 -43E7-B8D5 -DAAAE4636 2C7
WARNING:
Do not adjust thedriver's seatwhile driving so
that fullattention maybegiven tovehicle
operation.
Manual seatadjustment
T32A1308 27-44B2F3FC -EF1E-4159-AA42 -22C9D53C6 CFA
WARNING:
After adjusting aseat, gently shaketheseat to
confirm thattheseat islocked securely. Ifthe
seat isnot locked securely, itmay move
suddenly andcould cause theloss ofcontrol of
the vehicle.
SEA TS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
JVR0332X
Forward andbackward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull upthe adjusting lever
*
1
.
2. Slide theseat tothe desired position.
3. Release theadjusting levertolock theseat in
position.
Reclining:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull upthe adjusting lever
*
2
.
2. Tiltthe seatback tothe desired position.
3. Release theadjusting levertolock theseatback in
position.
The reclining featureallowstheadjustment ofthe
seatback foroccupants ofdifferent sizestohelp obtain
the proper seatbeltfit.(See ªSeat beltsº (P.1-9) .)
The seatback maybereclined toallow occupants to
rest when thevehicle isparked. Seat
lifter (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVR0333X
Pull uporpush down theadjusting levertoadjust the
seat height untilthedesired position isachieved.
P ower seatadjustment
T32A1308 27-8BB0095 E-C954-4EA7-BCA6-E3 736507277F
WARNING:
Never leavechildren oradults whowould
normally requirethesupport ofothers alonein
the vehicle. Petsshould notbeleft alone either.
They could unknowingly activateswitches or
controls andinadvertently becomeinvolved ina
serious accident andinjure themselves. Operating
tips:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The power seatmotor hasanauto-reset overload
protection circuit.Ifthe motor stopsduring the
seat adjustment, wait30seconds, thenreactivate
the switch.
. To avoid discharge ofthe battery ,do not operate
the power seatsforalong period oftime when the
engine isnot running.
Safety Ðseats, seatbelts andsupplement alrestraint system
1-3
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1-4
Safety Ðseats, seatbelts andsupplement alrestraint system
JVR0334X
Forward andbackward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Move forward orbackward theadjusting switch
*
1
to
the desired position.
Reclining:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Move forward orbackward theadjusting switch
*
2
to
the desired position.
The reclining featureallowstheadjustment ofthe
seatback foroccupants ofdifferent sizestohelp obtain
the proper seatbeltfit.(See ªSeat beltsº (P.1-9) .)
The seatback maybereclined toallow occupants to
rest when thevehicle isparked. Seat
lifter (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVR0119X
Pull uporpush down theadjusting switchtoadjust the
seat height untilthedesired position isachieved. Lumbar
support (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
SSS1053
The lumbar support featureprovides lowerback
support tothe driver.
Push eachsideofthe adjusting switchtoadjust the
seat lumbar areauntilthedesired position isachieved.
Heated seats(ifequipped)
T32A130 827-12F30A0 0-21DA-4474-BB84-80C 0B5836ADB
JVR0322X
The front seats canbewarmed bybuilt-in heaters. The
switches locatedonthe center console canbe
operated independently ofeach other.
1. Start theengine.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2. Select heatrange.
.
For high heat, push theHI(High) sideofthe
switch
*
1
.
.
For low heat, push theLO (Low) sideofthe
switch
*
2
.
.
The indicator light
*
3
will illuminate whenlow
or high isselected.
3. To turn offthe heater, returntheswitch tothe level
position. Makesuretheindicator lightturns off.
The heater iscontrolled byathermostat, auto-
matically turningtheheater onand off.The
indicator lightwillremain onaslong asthe switch
is on.
When thevehicle's interioriswarmed, orbefore
you leave thevehicle, besure toturn offthe
switch.
CAUTION:
. The battery couldrundown ifthe seat heater
is operated whiletheengine isnot running.
. Do not use theseat heater forextended
periods orwhen noone isusing theseat.
. Do not putanything onthe seat which
insulates heat,suchasablanket, cushion,
seat cover, etc.Otherwise, theseat may
become overheated.
. Donot place anything hardorheavy onthe
seat orpierce itwith apin orsimilar object.
This may result indamage tothe seat heater.
. Any liquid spilled onthe heated seatshould
be removed immediately withadry cloth.
. When cleaning theseat, never usegasoline,
thinner, orany similar materials.
SECOND ROWSEATS
T32A1308 27-3C9448 50-5F36-4EC0 -8FC1-B5D4740BE525
Adjustment
T32A130 827-C4C392 1B-4C08-4E61-8F01-E53B D4BE934 E
JVR0330X
Forward andbackward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull upthe adjusting lever
*
1
.
2. Slide theseat tothe desired position.
3. Release theadjusting lever
*
1
to lock theseat in
position.
Reclining:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull theadjusting lever
*
2
.
2. Tiltthe seatback tothe desired position.
3. Release theadjusting lever
*
2
to lock the
seatback inposition.
The reclining featureallowstheadjustment ofthe
seatback foroccupants ofdifferent sizestohelp obtain
the proper seatbeltfit.(See ªSeat beltsº (P.1-9) .)
The seatback maybereclined toallow occupants to
rest when thevehicle is
parked.
JVR0376X
Folding:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Forvehicles notequipped withthird rowseat: Pull
up the lever
*
1
and foldtheseatback flat.
For vehicles equipped withthird rowseat: Pullup
the lever
*
1
and pullthestrap
*
2
on the lower
side ofthe outboard seatstofold theseatback flat.
2. To return theseats toaseating position, pushup
on the seatback untilitlatches inplace.
WARNING:
. Never allowanyone toride inthe luggage
area oron the rear seats when theyarein
the fold-down position.Useofthese areas
by passengers withoutproperrestraints
could result inserious injuryinan accident
or sudden stop.
. Donot fold down thesecond rowseats when
occupants areinthe second rowseat area or
any luggage ison the second rowseats.
. Properly secureallluggage tohelp prevent it
from sliding orshifting. Donot place lug-
gage higher thantheseatbacks.
Safety Ðseats, seatbelts andsupplement alrestraint system
1-5
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1-6
Safety Ðseats, seatbelts andsupplement alrestraint system
. When returning theseatbacks tothe upright
position, becertain theyarecompletely
secured inthe latched position. Ifthey are
not completely secured,passengers maybe
injured inan accident orsudden stop.
Walk -inmechanism (Three-rowmodel):
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The second rowseats cantiltand slide foreasy entry/
exit to/from thethird rowseats.
WARNING:
After operating thewalk -inmechanism, besure
to return theseat tothe rearmost positionand
then tiltupthe seatback untilitlatches.
CAUTION:
. When operating thewalk -inmechanism,
push andhold theseatback andoperate
slowly. Ifthe seatback istilted down quickly
and then allowed toslide, thereisarisk that
it could contact yourfaceorother partsof
your body, orpinch yourhand orfoot,
causing injury.
. When operating thewalk -inmechanism, be
sure nottocontact anymoving partsto
avoid possible injuriesand/ordamage.
. When operating thewalk -inmechanism, be
sure thatthesecond rowseats arenot
occupied bypassengers and/oranyobjects
to avoid possible injuriesand/ordamage.
. Donot operate thewalk -inmechanism with
objects, drinks,etc.on the seat. Thismay
cause objects tobreak orcause thepassen-
ger room tobe
soiled.
JVR0355X
1. Pull thelever
*
1
to tilt down theseatback.
2. Slide theseat forward.
3. When returning theseat toits original position,
slide theseat backward, tiltthe seatback upand
then secure itin place.
THIRD ROWSEATS(ifequipped)
GUID-6AF ED800-DD5 5-4234-8775-F187F0285680
Folding
GUID-F0E0E9 8B-1F35-427F-AE1C-9 E5024C736 F1
JVR0329X
T o fold thethird rowseats flatformaximum cargo
capacity:
1. Make surethehead restraints areallthe way
down.
2. Pull thestrap
*
1
to release theseat.
3. Once released, pushtheseatback forward
*
2
.
T o return thethird rowseats toaseating position:
Use thepull straps
*
1
to raise each seatback. Pull
back untiltheseatback latchesintoposition. Make
sure toproperly raiseeach seatback toan upright and
secured position.
WARNING:
When theseat isreturned tothe normal seating
position, thehead restraints mustbereturned to
the upright position toproperly protectvehicle
occupants.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
ARMREST
GUID-0CFA7136-CE0F-460F-B8C 8-64D55ED211DE
Pull thearmrest downuntilitrests onthe seat cushion.
JVR0337X
Second rowseats
Fold down thearmrest whilepulling thestrap untilit
rests onthe seat cushion.
T32A130827-D B0E9BDD-2C29-4173 -B3C0-5A08C9BDE199
WARNING:
Head restraints supplement theother vehicle
safety systems. Theymayprovide additional
protection againstinjuryincertain rearend
collisions. Adjustable headrestraints mustbe
adjusted properly, asspecified inthis section.
Check theadjustment aftersomeone elseuses
the seat. Donot attach anything tothe head
restraint stalksorremove thehead restraint. Do
not use theseat ifthe head restraint hasbeen
removed. Ifthe head restraint wasremoved,
reinstall andproperly adjustthehead restraint
before anoccupant usestheseating position.
Failure tofollow theseinstructions canreduce
the effectiveness ofthe head restraint. Thismay
increase therisk ofserious injuryordeath ina
collision.
. Your vehicle isequipped withahead restraint that
may beintegrated, adjustableornon-adjustable.
. Adjustable headrestraints havemultiple notches
along thestalk tolock them inadesired
adjustment position.
. The non-adjustable headrestraints havesingle
locking notchtosecure themtothe seat frame.
. Proper Adjustment:
Ð For theadjustable type,alignthehead restraint
so the center ofyour earisapproximately level
with thecenter ofthe head restraint.
Ð Ifyour earposition isstill higher thanthe
recommended alignment,placethehead
restraint atthe highest position.
. Ifthe head restraint hasbeen removed, ensure
that itis reinstalled andlocked inplace before
riding inthat designated seatingposition.
ADJUST ABLEHEAD RESTRAINT
T32A1308 27-C9F749 93-858A-41B 5-9556-616AFC9796B A
SSS0992
1. Removable headrestraint
2. Multiple notches
3. Lock knob
4. Stalks
NON-ADJUST ABLEHEAD RESTRAINT
T32A1308 27-2CDD1B B5-1601-41B1-8E92-E 1A700D921 F6
JVR0203X
1. Removable headrestraint
2. Single notch
3. Lock knob
Safety Ðseats, seatbelts andsupplement alrestraint system
1-7
HEAD
RESTRAIN TS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1-8
Safety Ðseats, seatbelts andsupplement alrestraint system
4. Stalks
REMOVE
T32A130 827-49240 0AE-FA4A-4337- 994A-64826 B9647C6
SSS1037
Use thefollowing procedure toremove thehead
restraint.
1. Pull thehead restraint uptothe highest position.
2. Push andhold thelock knob.
3. Remove thehead restraint fromtheseat.
4. Store thehead restraint properly inasecure place
so itis not loose inthe vehicle.
5. Reinstall andproperly adjustthehead restraint
before anoccupant usestheseating position.
INST ALL
T32A130 827-AC0F95 0A-602B-45AB-9D97-17 CEDE4AA04D
SSS1038
1. Align thehead restraint stalkswiththeholes inthe
seat. Make surethatthehead restraint isfacing
the correct direction. Thestalk withtheadjustment
notch
*
1
must beinstalled inthe hole withthe
lock knob
*
2
.
2. Push andhold thelock knob andpush thehead
restraint down.
3. Properly adjustthehead restraint beforean
occupant usestheseating position.
ADJUST
T32A130 827-ED3FF4 71-57AE-4DB 8-96D1-FF8165FF A3F4
SSS0997
For adjustable headrestraint
Adjust thehead restraint sothe center islevel withthe
center ofyour ears. Ifyour earposition isstill higher
than therecommended alignment,placethehead
restraint atthe highest
position.
JVR0259X
For non-adjustable headrestraint
Make surethehead restraint ispositioned fromthe
stored position orany non-latch positionsothe lock
knob isengaged inthe notch before ridinginthat
designated seatingposition.
Raise
T32A130827- 21BF58C9-E6 6B-43AB-8465-6BA3A 92920D4
SSS1035
T ype A
T o raise thehead restraint, pullitup.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SSS1037
T ype B
T o raise thehead restraint, pushandhold thelock
knob. Then, pullitup.
Make surethehead restraint ispositioned fromthe
stored position orany non-latch positionsothe lock
knob isengaged inthe notch before ridinginthat
designated seatingposition.
Lower
T32A130827- FA4C1475-83A4 -4F07-AB5A-232C4EC6 648D
SSS1036
T o lower, pushandhold thelock knob andpush the
head restraint down.
Make surethehead restraint ispositioned sothe lock
knob isengaged inthe notch before ridinginthat
designated seatingposition.
T32A130 827-70A687 60-75B8-47F3-AB2C-B 69D82C30139
PRECAUTIONS ONSEATBEL TUSAGE
T32A1308 27-2F565D7 D-05DE-4FB6 -B3C3-300FC A1D36C5
If you arewearing theseat beltproperly adjusted and
sitting upright andwell back inthe seat, chances of
being injured orkilled inan accident and/ortheseverity
of injury maybegreatly reduced. NISSANstrongly
encourages youand allofyour passengers tobuckle
up every timeyoudrive, evenifyour seating position
includes thesupplemental airbag systems.
Safety Ðseats, seatbelts andsupplement alrestraint system
1-9
SEA
TBEL TS
&RQGLWLRQ
([FHSWIRU&KLQD