2020 NISSAN FRONTIER warning

[x] Cancel search: warning

Page 389 of 492

NISSAN FRONTIER 2020  Owner´s Manual Caution symbols for batteryWARNING
O1No smoking, No exposed flames, NoSparks Do not expose the battery to electrical sparks, flames or smoking. Hydrogen gas generated by the
battery is explosive. Expl

Page 390 of 492

NISSAN FRONTIER 2020  Owner´s Manual NOTE:
Care should be taken to avoid situations
that can lead to potential battery dis-
charge and potential no-start conditions
such as:
1.Installation or extended use of elec-
tronic accessories that

Page 391 of 492

NISSAN FRONTIER 2020  Owner´s Manual CAUTION
• Do not ground accessories directly to
the battery terminal. Doing so will
bypass the variable voltage control
system and the vehicle battery may
not charge completely.
• Use electrical a

Page 393 of 492

NISSAN FRONTIER 2020  Owner´s Manual The dry paper type filter element may be
cleaned and reused. Replace it according
to the maintenance log shown in the
"Maintenance and schedules" section of
this manual. When replacing the fil

Page 396 of 492

NISSAN FRONTIER 2020  Owner´s Manual If the brakes do not operate properly, have
the brakes checked. It is recommended
that you visit a NISSAN dealer for this ser-
vice.
Self-adjusting brakes
Your vehicle is equipped with self-adjusting

Page 397 of 492

NISSAN FRONTIER 2020  Owner´s Manual If a typeOAfuse is used to replace a typeOB
fuse, the typeOAfuse will not be level with
the fuse pocket as shown in the illustration.
This will not affect the performance of the
fuse. Make sure the fu

Page 398 of 492

NISSAN FRONTIER 2020  Owner´s Manual 5. If the fuse is openOA, replace it with a
new fuse
OB.
6. If a new fuse also opens, have the elec- trical system checked and repaired. It is
recommended that you visit a NISSAN
dealer for this servi

Page 406 of 492

NISSAN FRONTIER 2020  Owner´s Manual To replace the license plate light:
1. Apply force as shown in image to re-move tension that locks bulb assembly
to the bumper.
2. Pivot bulb assembly away from bumper to release fully.
3. Rotate the