2020 MERCEDES-BENZ SPRINTER ECU

%
If
th ef ront axle is damaged, raise thev ehicle
at thef ront axle and if ther ear axle is dam‐
aged, raise thev ehicle at ther ear axle.
% Ve
hicles with automatic transmission
and rear-wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D.
If th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page210).At ow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. #
Obser vethen otes on permissible towing
me thods (/ page207). #
The propeller shafts tothed rive axles must
be remo vedift he maximum permissible tow‐
ing dis tance is exceeded. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C. #
Release thep arking brake. #
Switc hoffthei gnition. Loading
thev ehicle fort ransport #
Obser vethen otes on permissible towing
me thods (/ page208, 209). #
Connect thet ow bar tothet ow ing eyetol oad
th ev ehicle. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C.
% Ve
hicles with automatic transmission: in
th ee vent of damag etothe electrics, the
automatic transmissio nmaybe loc kedin
position 005D.Toshifttop osition 005C,provide
th eo n-boar delectrical sy stem wit hpower
( / pag e202). #
Load thev ehicle ont othe transpor ter. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005D. #
Use thep arking brak etosecurethe vehicle
agains trolling away. #
Only secur ethe vehicle bythew heels. Ve
hicles with all-wheel drive/vehicles with
automatic transmission #
Mak esuret hat thef ront and rear axle scome
to rest on thes ame transpor tatio nv ehicle.
* NO
TEDama getothed rive trai ndueto
incor rect positioning #
Do no tpositio nthe vehicle abo vethe
connection point of thet ranspor tvehi‐
cle. *
NO
TEVehicle damag eduetoimproper
loading An all-wheel driv
evehicle ma ybedamaged if
it is tilted, pushed or mo vedw hile being loa‐
ded using ahydraulic plat form. #
When loading avehicle wit hall-wheel
drive, thev ehicle should onl ybemoved
and positioned byits ownp owe r. #
The vehicle and thes urface it is posi‐
tione dons hould no longer be mo ved
when thek eyisremo vedorift he door
is open. To
wing eyes torage location The
towing eyeisl ocated in thev ehicle tool kit in
th ef ront-passen gerfootwell (/ page212). 210
Breakdown assis tance

*
NO
TEDama geor malfunction scaused by
moisture Moistur
emaycause dama getothee lectrical
sy stem or cause it tomalfunction. #
When thef use bo xisopen, mak esure
th at no moistur ecan enter thef use box. #
When closing thef use box, mak esure
th at thes eal of thel id is positioned cor‐
re ctly on thef use box. If
th en ew fuse whic hhas been inser teda lso
blo ws,have thec ause traced and rectified at a
qu alified specialis tworks hop.
Mak esureoft hefollowing befor ereplacing a
fuse:
R thev ehicle is secured suc hthat it does not
ro llaw ay
R all electrical consume rsares wit ched off
R thei gnition is switched off
The fuses ar elocated in various fuse bo xes:
R fuse bo xinthe front-passenger foot we ll
(/ page212 )
R fuse bo xinthe seat base of thed rive r's seat
(/ page212 ) Opening
thef useb oxinthes eat base of the
dr iver's seat #
Toopen: press down and unclip fasteners 1
on thec over. #
Remo vethec ove r. #
Toclose: pressthec over firm ly in tothes eat
base until fasteners 1clip in. Opening and closing
thef useb oxinthec o-
driver's foot we ll Opening
thef useb ox #
Unlocking andremoving thes towa ge com‐
partment co verint he co-driver's foot we ll
(/ page213). Example
:vehicle tool kit insert #
Liftthe inser tatmarke dp ositions 1. #
Pull thei nser tout of clips 2.
Closing thef useb ox #
Slide thei nser tint oc lips 2. #
Close thei nser tbyp ressing on mar kedp osi‐
tions 1. #
Put on thes towa ge compartment co verint he
co-d rive r's foot we ll and loc kit(/pag e213). Ve
hicl etool kit Information on
thev ehicle tool kit The
vehicle tool kit is located in thes towa ge com‐
partment in thef ootwell on thef ront-passenger
side (/ page213).
Th ev ehicle tool kit contains:
R atow ing eye
R ascrew driver wit hTorx, Phillips and slotted
bits
The vehicle tool kit ma yalso contain thef ollow‐
ing, fore xamp le:
R an open-en dwrench
R awheel wrench 212
Breakdown assis tance

Aspec
tratio: relationship between tir eheight
and tir ewidthinp ercent.
Ti re pressure: pressureinside thet irea pplying
an outwar dforce toeve rysquar einc hoft he
tire's sur face. The tir epressur eiss pecified in
pounds per squar einc h( psi), in kilopascal (kPa)
or in bar .The tir epressur eshoul donlybec orrec‐
te dw hen thet ires ar ecold.
Ti re pressur eoncoldt ires: thet ires ar ecold
when thev ehicle has been par kedw itht he tires
out of direct sunlight foratl east thre eh our sand
th ev ehicle has been driven less than 1m ile
(1.6 km).
Ti re contact sur face: thep artoft he tir ethat
comes int ocontact wi th theroad.
Ti re bead: thep urpose of thet ireb ead is to
ensur ethat thet ires its securel yonthe wheel
ri m. Ther eareseveralw irec ores in thet ireb ead
to preve ntthet iref romc hanging lengt honthe
whee lrim.
Sid ew all: thep artoft he tir ebetwe en thet read
and thet ireb ead.
Special equipment weight: thec ombined
we ight of those optional extras that we igh more
th an ther eplaced standar dparts and mor ethan
5l bs (2. 3kg). These optiona lextras ,suc has
high-pe rformance brakes, le velc ontrol sy stem, a
ro of luggag erackorah igh-perform anc ebatter y,
ar en otincluded in thec urb weight and the
we ight of thea ccessories.
TIN (Tir eIdentification Number): auniqu eiden‐
tification number whic hcan be used byatire
manufacturer toidentify tires, fore xamp lefora
product recall, and thus identif ythe pur chasers.
The TIN is made up of them anufacturer identifi‐
cation code, tir esize, tir etype code and them an‐
ufacturing date.
Load-bearing index: thel oad-bearing inde x(also
load index) is acode that con tains them aximum
load-bearing capacity of atire.
Tr action: traction is ther esult of friction between
th et ires and ther oad sur face.
We ar indicator: narrow bars(tread wear bars)
th at ar edistributed overthe tir etread. If thet ire
tread is le velw itht he bars, thew ear limit of
1/1 6in( 1.6m m) has been reached.
Distribution of vehicl eoccupants: distribution
of vehicle occupants over designated seat posi‐
tions in avehicle. Maximum permissible pa
yload weight: nomi‐
nal load and luggag eload plus 150lbs (68 kg)
multiplied bythen umber of seats in thev ehicle. Changing
awheel Note
sons electing, installing and replacing
tires Yo
uc an ask fori nformation rega rding permit ted
wheel/tir ecombinations at aqualified specialist
wo rkshop. &
WARNING Risk of accident du etoincor‐
re ct size sofwheels and tires
If wheels and tires of thew rong size ar eused,
th ew heel brakes or wheel suspension com‐
ponents ma ybedamaged. #
Alwaysr eplace wheels and tires with
ones that fulfill thes pecification softhe
original part.
Fo rw heels, pa yattention tothef ollowing:
R Designation
R Type
R Perm issible wheel load
R Wheel of fset
Fo rtires, pa yattention tothef ollowing:
R Designation
R Manufacturer
R Type
R Load-bearing index
R Speed rating &
WARNING Risk of inju rythro ugh exceed‐
ing thes pecified tir eload rating or the
permissible speed rating
Exceeding thes pecified tir eload rating or the
permissible speed rating ma ylea dtot ire
dama geand tothet ires bur sting. #
Therefore, onl yuse tir etypes and sizes
appr ovedfor your vehicle model. #
Obser vethet irel oad rating and speed
ra ting requ ired fory our vehicle. Wheels and tires
231

Only use
them iddle roda nd thep um pleve rrod
wit hthe larges tdiame terf or thej ackasa lug
wrenc hextension. Only inse rtthem iddle rodon
th el ug wrench, and alw aysasf ar as it will go.
Otherwise, ther ods could bend and defor mso
muc hthat they can no longer be use daspump
le ve rs fort he jac k. #
Toprepar ethe hydrauli cjack: insertthe
th irdr od of pum plever 1fort he jac kinto
th el ug wrenc hextension. #
Close pressur erelease scr ew3. #
Todo this, use thef lattened sectio nonpump
le ver 1totur np ressur erelease scr ew3
clockwise tothes top.
% Do no
tturnp ressur erelease scr ew3 more
th an one or tw ofull turns .Hydraulic fluid
coul dotherwise escape. #
Inser tpum plever 1withthe larges trod into
th er eces sont he jac kand secur ebyturning
it clo ckwise. #
Place thej ackv erticall ybeneat hthe jac ksup‐
por tpoints described belo w. Jac
ksuppor tpoint, front axle Jac
ksuppor tpoint, rear axle (e xamp le:chassis
up to3.5 t) Jack
suppor tpoint, rear axle (e xamp le: Cargo
Va na nd Passenger Vanu pto4 .0 t) 236
Wheels and tires

#
Tighten thew heel bolts or nuts evenlyint he
sequence indicated (1 to6 ).
Specified tightenin gtorque:
R Steel wheel bolts: 177l b-f t(24 0N m)
R Whee lnuts: 133lb-f t(18 0N m)
R Alloywheel bolts: 133lb-f t(18 0N m) #
Push thep isto nont hehydraulic jac kinagain
and close thep ressur erelease scr ew. #
Vehicles with all-wheel drive: turnthe jack
spindle clockwise as farasitw illg o.
% Yo
uc an no winstallth eh ub caps on steel
wheels wit hwheel bolts. The ins tallation pro‐
cedur edepends on whe ther theh ub cap acts
as atrimt hat co vers thew hole wheel, or just
co vers thec enter. #
Wheel with hub cap: positiontheo pening
fo rt he tir evalveint he hub cap overthe tire
va lve. #
Push thee dgeoft he hub cap ont othe wheel
ri mw ithb othh ands until it engages into
place. Mak esuret he hub cap retaining
cat ches engag eonthesteel wheel. #
Wheel with central hub cap: positionthe
re tainin glugs of thec ent ralh ub cap overthe
whee lbolts. #
Hitthem iddle of theh ub cap toengag eiton
th ew heel. #
Secur ethe faulty wheel in thes par ew heel
brac ket. #
Vehicles with Super Single tires: transport
th ef aulty rear wheel on thel oad area. The
re ar wheel is tool arge fort he spar ewheel
brac ket. #
Chec kthe tir epressur eoft he newl yins talled
wheel and adjus titifnecessar y. #
Retighten thew heel bolts or wheel nuts tothe
specified tightening torque af tert he vehicle
has been driven 31miles (50 km). #
When using awhee lors parew hee lwitha
ne worn ewly painted whee lrim, ha vethe
wheel bolt sornutsr etightene dafter appr ox‐
ima tely 620 mile s(1,000 km) to3,10 0m iles
(5,000 km).
% Ve
hicles with thet irep ressur emonitor
sy stem: all ins talled wheels mus tbeequip‐
ped wit hfunctioning sensors.
Mak esuretoo bservethef ollowing fur ther rela‐
te ds ubject:
R Notesont irep ressur e(/pag e217 ) Spar
ewheel Note
sont he eme rgency spar ewheel and
spar ewheel Spar
ewheel: wheel and tir edimension saswell
as thet ype of tir ecorrespond totheo ther ins tal‐
led wheels.
Emer gency spar ewheel: wheel and/or tire
dimension saswell asthet ype of tir earediffer‐
ent from thew heel tobe replaced. Alabel wit ha
speed limit can be found on thee mer gency spa re
wheel.
An ins talled emer gency spa rewheel or spare
wheel changes thed riving characteristic sand
bear srisks. &
WARNING Risk of accident caused by
incor rect wheel and tir edimensions
Whe nthe emergency spar ewheel or the
spar ewheel is ins talled, driving characteris‐
tic sm aybe se verely affected.
The reis an inc reased risk of an accident.
To prev ent hazardous situations: #
Oncet he spar ewheel or thee mer gency
spa rewheel has been ins talled, check
th et irep ressur eand adjus tifneces‐
sar y. #
The emer gency spa rewheel ma yonly
be used temp oraril yand mus tbe
re placed wit hastandar dwheel as soon
as possible. #
Neverins tall mor ethan one emergency
spar ewheel. #
When operating your vehicle wit hthe
emergency spar ewheel ins talled, adapt Wheels and tires
239

yo
ur drivin gstyle acco rdingly and drive
carefully. #
Do no tswitc hoffESP ®
. #
Sno wchains mus tnotbe ins talled on
th ee mer gency spa rewheel. #
Replace thee mer gency spa rewheel
af te ram aximu mofs ixyears, rega rd‐
less of wear. R
When usin ganemergency spa rewheel
(whic hisd iffe re nt from thew heel tobe
re placed) atop speed of 50 mph(80 km/h)
mus tnotbe exc eeded.
R The tir epressur eoft he emergency spare
whee lmustbec heckedb efor estartin gaj our‐
ne y(/pag e221).
R Have thee mer gency spa rewheel replaced by
aq ualified specialis tworks hop. &
WARNING Risk of accident from dam‐
aged spa rewheel wit hSuper Sin glet ires
Ve hicles with Super Single tires
The tir eofthe spar ewheel exposed toabo ve-
ave rage loads af terb eing ins talled on ther ear
axle. If youe xceed them aximum speed or the
maximu mdista nce, or ins tallth es par ew heel
again, thet ireoft he spar ewheel ma ybe
damaged. The tir edamag emaynotbev isible
and no tdetectable.
Ad amaged tir emaycause alossoft irep res‐
sure. Thi scould cause youtol ose control of
th ev ehicle. #
Onlyusethes par ew heel if it has not
ye tb eeni nstalled on ther ear axle with
th ec urrent tires. #
Ifth es par ew heel had been ins talled on
th er ear axle, ha vethet ireoft he spare
wheel replaced af terc hanging the
wheel again, ir respectiv eofthe dis‐
ta nce. #
Fors afet yr easons, when changing atire
ensur ethat only thet irev alvetype
appr ovedfor thet ires is used. *
NO
TEDama getothet ransmission Ve
hicles with Super Single tires: whenyou
ins tallth es par ew heel on ther ear axle, the
transmission ma ybedamaged bythed iffe r‐
ent rotational speed softhe wheels. #
When thes par ew heel is ins talled on
th er ear axle, obser vethem aximum
speed of 34 mph(55 km/h) and the
maximu mdriving dis tance of 62 miles
(100 km). %
It is possible
,without restrictions, touse the
spar ewheel only on thef ront axle of avehi‐
cle wit hSuper Single tires.
The following should be checkedr egular ly,p artic‐
ularly prior tolong journe ys:
R The secur epositioning of thes par ew heel
R The tir epressur eoft he spar ewheel (adjust
th et irep ressur eifn ecessary) (/ page218 )
R Thef astenings of thes par ew heel brac ket
Re place thet ires af ters ixyearsatt he latest,
re ga rdless of wear.T his also applies tothes pare
wheel.
% If
yo uh ave installed an emer gency spa re
wheel or spar ewheel, thet irep ressur emoni‐
to rw illn ot function fort his wheel.T he emer‐
ge ncy spa rewheel or spar ewheel is not
equipped wit hasensor form onitoring tire
pressu re. Installing/removing
thes pare wheel Ve
hicles with rear wheel drive: removing the
spar ewheel (Cargo Van/Passenger Van) Bolt co
vers fort he saf etyh ooks (exa mp le: Cargo
Va n) 240
Wheels and tires

4)
Only NAFTAt rail er cross member ,tow ing capa‐
cit y5 ,000 or 7,500 lbs.
6) In trailer operation, no individual maximu mper‐
missible gross weight of those specified in the
ta ble ma ybeexceeded.
8) The vehicle lengt hfor vehicles wit hthe model
series 90 7.65 7( Ca rgoV an) is 29 0in(7,36 7m m).
9) It is no tpossible to towat railer on vehicles
whic hhaven otbeen equipped wi thatrailer cou‐
plin gass tandard. In this case, them aximum per‐
missible gross vehicle weight cor responds tothe
maximu mpermissible gross weight of thev ehicle
combination.
% If
th et railer coupling is retrofitted ,the identi‐
fi cation pla tess hould be adap teda ccording ly
wit hthe altered, maximum permissible
we ights. Please consult an authorized
Mercedes-Benz Center if youh ave anyf ur‐
th er questions. The body builder label is
found on thef ront-end
module abo vether adiator and con tains them axi‐
mum permissible curb weight fort he vehicles. Lashing points and car
rier sy stems Information abou
tthe cargo tie-down points *
NO
TERisk of accident if them aximum
loading capacity of thec argo tie-down
point is exceeded If
yo uc ombin evarious cargo tie-down points
to secur eaload, alw ayst aket he maximum
loading capacity of thew eakes tcargo tie-
down poin tint oa ccount.
During maximum full- stop braking, forc es may
act whic hcan multipl ythe weight of thel oad. #
Alwaysu se se veralc argo tie-down
point stod istribut eand spread thel oad.
Distribut ethe load on thec argo tie-
down points evenly. The nominal
tensil estrengt histhe maximum per‐
missible tensil eforce.
Fu rther information on thec argo tie-down points
and tie-down eyes can be obtained in the" Trans‐
po rting" section (/ page 179).
Ti e-d owne yes
No minal tensile stre ngt hoft he tie-down eyes Ti
e-d owne yesN ominaltensile
st re ngth
Pa ssenger Van3 50 daN
Cargo Van8 00 daN Loading
rails
No minal tensile stre ngth of thec argo tie-
down point sinthe cargo compartment Cargo tie-down
point
No
minal tensile
st re ngth
Loading rails on cargo
compartment floor 500 daN
Lo we rloading rail on
side wall 200 daN
Up per loading rail on
side wall 12
5d aN The
values specified appl yonlytol oads resting
on thec argo compartmen tfloor if youo bse rve
th ef ollowing:
R The load is secured totwoc argo tie-down
points on ther ail
R The dis tance tothen eares tload-securing
point on thes ame rail is appr oximately 1m Information about
roof racks &
WARNING Risk of inju ryif maximum roof
load is exceeded
If yo up laceal oad on ther oof as well as any
ex tern al and internal attachments ,the vehi‐
cle's center of gr avity will be raised and the
usual drivin gcharacteristics, as well as the
st eering and braking characteristics, will
ch ange. During cornering ,the vehicle will tilt
mor eseve rely an dmayreact mor esluggishly
to steering mo vements.
If yo ue xceed them aximum roof load, the
driving characteristics, as well as thes teering 260
Tech nica ldata

and brakin
gcharacteristics, will be greatly
impaired. #
Alwaysc ompl ywitht he maximum roof
load and adjus tyour driving style. &
WARNING Danger of accident du eto
une venl oading
If yo ul oad thev ehicle une venly, theh andling
ch aracteristic saswell asthes teering‑ and
braking characteristic scan be heavily
impaired. #
Load thev ehicle evenly. #
Secu rethel oad agains tsliding. The driving, braking and
steering characteristics
of thev ehicle will chang ewitht he type of load,
th ew eight and thec enter of gr avity of thel oad.
* NO
TERisk of accident if them aximum
permitted roof load is exceeded. If
th ew eight of ther oof luggage, including the
ro of rack ,e xceeds them aximum permitted
ro of load, ther eisar isk of an accident. #
Ensur ethat thew eight of ther oof lug‐
ga ge and roof rack toget her does not
exc eed them aximum permitted roof
load. #
The roof rack 's supporting feet mus tbe
ar ranged at aunifo rm distan ce from
ea ch other. #
Mercedes-Benzr ecommendsyoui nstall
as tabilizer bar on thev ehicle's front
axle. Fu
rther information about saf etym easures can
be found in the" Transport" section
(/ page179).
Max. roof load/pair sofsupporting roof rack
fe et Ve
hicles
with Maximum
ro
of load Minimum
number of
pair
sofs up‐
porting feet
Normal roof 66 1lbs
(300 kg) 6
High roof 33 1lbs
(150 kg) 3 This information applies if
thel oad is distributed
eve nly across thee ntir eroof area.
If th er oof rack is shor ter,re duce thel oad propor‐
tionatel y.The maximum load per pair of support‐
ing roof rack feet is110l bs (50 kg).
The loading guidelines and other information
about load distribution and load securing can be
fo und in the" Transport" sectio n(/pag e179). Te
ch nica ldata 261