2020 MERCEDES-BENZ SPRINTER warning light

Exterior lighting
Note
sonc hanging thel ight swhen driving
abroad Ve
hicles with halogen or static LED head‐
lamps: Changing theh eadlamps is no tneces‐
sar y.The legal requ irements will also be fulfilled
in countries wit hlefta nd right-han dtraffic. Informatio
nabout lighting sy stems and your
re sponsibility The
vehicle's various lighting sy stems ar eonly
aids. The vehicle driver is responsible fora djust‐
ing thev ehicle's lighting tothep reva ilin glight,
visibilit y,statutor ycondition sand traf ficc ondi‐
tions. Light switch
Operating the light switch
#
00470060 Activates or deacti vatesp arking
lights and license plat eand instrument light‐
ing. #
00480058 Activates or deacti vatesa utomatic
driving lights/daytime running lights (p refer‐
re dl ight switc hposition). #
00490058 Activates or deacti vatesl ow beam/
high beam. #
4 Activates or deacti vatesf og light. #
5 005E Activates or deacti vatesr ear fog
light. #
6Applies or releases thee lectric parking
brake(/ page143)
% If
yo uh ear awarning tone when exitin gthe
ve hicle, thel ight ma ystillbeo n. %
The tur
nsignal light ,the high beam and the
high-beam flasher ar eoperated wit hthe com‐
bination switc h(/pag e85).
% Leaving
thes tandin glight sonf or several
hour sdrains theb atter y.
If th eb atter ychar geisvery low, thes tanding
light swill swit choffa utomatically toenable
th en extv ehicle start.
Au tomatic drivin glights function &
WARNING Risk of accident whe nthe low
beam is switched of finpoor visibility
When thel ight switc hissetto 0058 ,the low
beam ma ynotbe switched on automaticall yif
th er eisf og, sno worother causes of poor vis‐
ibility suc hasspray. #
In suc hcases, tur nthe light switc hto
0058 . The automatic driving lights ar
eonlyana id.
Re sponsibility forv ehicle lighting restsw ithy ou.
Tu rn thel ight switc hfrom 0058 to0058 immedi‐
atel yint heevent of fog, sno wors pray .O ther‐
wise, thed riving light is temp oraril yinter rupte d.
To switc hthe automatic driving lights on:
R Turn thel ight switc htothe0058 position.
Switc hthe po wersupply on: thep arking
lamps will automaticall yswitc honoro ff
depending on theb rightness of thea mbient
light.
The daytime running la mpsareswitched on
when thee ngine is running .The pa rking
lamps and thel ow beam also switc honoroff
depending on theb rightness of thea mbient
light.
When thel ow beam is switched on, the0058
indicator lam ponthe instrument clus terw ill
also switc hon.
Switching fogl ight and rear fogl ight on or off
Re quirements:
R The light switc hisinthe0058 or0058 posi‐
tion.
R The po wersupply or thee ngine has been
switched on. #
Toswitc hthe fogl ight on or off: press but‐
ton 7. #
Toswitc hthe rear fogl ight on or off: press
button 6. 84
Light and vision

Compl
ywitht he countr y-specific regulations for
usin gthe rear fogl amp. Operating
thec ombination light switch 1
High beam
2 Right tur nsignal light
3 Headlam pflashing
4 Leftturns ignal light #
Toindicate: pushthec ombination switc hin
th er equired direction 2or4 until it
engages. In thec ase of larger steering mo ve‐
ments, thec ombination switc hwill automati‐
cally switc hback. #
Toindicat ebriefl y:tapt he combination
switc hbriefly in ther equired direction 2or
4.T he cor responding tur nsignal lam pwill
fl ash thre et imes. #
Toswitc hont he hig hbeam: switchon the
lo wb eam (/ page84). #
Pushthe combination switc hforwa rds 1.
The 0057 indicator lam ponthe instrument
clus terw illl igh tup. The combination switch
willr etur ntoi tsstartin gposition.
% The high beam swit ches tothe 0058 position
onl yind arkness and when thee ngine is run‐
ning. #
Toswitc hofftheh igh beam: pushthec om‐
bination switc hforwa rds 1or briefly pull it
in thed irection of ar row3(the actio nfor
headlam pflashing switches theh igh beam
off).
The 0057 indicator lam ponthe instrument
clus terw illgoo ut. The combination switch
willr etur ntoi tsstartin gposition. %
Ve
hicles with Highbeam Assis t:when
Highbeam Assis tisactive, it controls the
activatio nand deactivatio nofthe high beam
(/ page86). #
Toactivat eheadlam pflashing: switchon
th ep owe rsupp lyor ignition. #
Brief lypull thec ombination switc hinthe
direction of ar row3. Switching hazar
dwarnin glights on or off #
Toswitc hona nd off: press button 1.
If yo uo perat eaturns ignal indicator while the
hazar dwarning light sareswitched on, onl ythe
tur ns igna llamps onther ele vant sid eofthevehi‐
cle will light up.
% The hazar
dwarning light swillwo rkeven
when thev ehicle has been switched off. Cornering light function
The cornering light impr
ovesthe illuminationof
th er oadw ayove raw idea ngle in thet urning
direction ,e.g. enabling better visibility in tight
bends. Light and vision
85

The function is activ
eunder thef ollowing condi‐
tions:
R The speed is less than 37 mph(60 km/h) and
th ei ndicator has been switched on or the
st eering wheel is turned.
R The speed is between 37mph(60 km/h) and
50 mph(80 km/h )and thes teering wheel is
turned.
The cornering light ma ystilllight up foras hort
time but is switched of fautomatically af tera
maximu mofthree minutes.
% When
reve rseg ear is engaged, thel ighting
switches totheo pposit eside. Highbeam Assist
Ad
aptiv eHighbeam Assis tfunction &
WARNING Risk of accident despite
Ad aptiv eHighbeam Assist
Ad aptiv eHighbeam Assis tdoes no trecognize
th ef ollowing road users:
R Road user swithout lights, e.g .pedes‐
trians
R Road user swithp oor lighting ,e.g.c yclists
R Road user swhose lighting is obstructed,
e.g .bya barrier
On very rare occasions, Adaptiv eHighbeam
Assis tmayfailto recognize other road users
wit htheir ownlighting, or ma yrecognize
th em tool ate.
In these or similar situations, thea utomatic
high beam is no tdeactivated or is activated
despit ethe presence of other road users. #
Alwayso bser vethet raffic carefull yand
switc hofftheh igh beam in good time. The
Adaptiv eHighbeam Assis tautomatically
swit ches between thef ollowing settings:
R Lowb eam
R High beam
The sy stem de tects that vehicle lights are
approaching in theo pposit edirection or driving
ahead of thev ehicle. At
speeds greater than 19 mp h(30 km/h), a
ch ang eism adetothef ollowing setting:
R If no other road user saredetected, theh igh
beam switches on automaticall y.
At speeds less than 16 mp h(25 km/h) or if there
is suf ficient road lighting ,achang eism adeto
th ef ollowing setting:
R The high beam automatically switches off.
Sy stem limitations
Ad aptiv eHighbeam Assis tcanno ttak et he road,
we ather or traf ficc onditions int oconsideration.
The de tection of obs tacles can be restricted if:
R Visibility is impaired, e.g. in fog, heavy rain or
snow
R The sensor saredirty or co vered
Ad aptiv eHighbeam Assis tisonlyana id.Youa re
re sponsible fore nsuring cor rect vehicle lighting
in accordance wit hthe pr evailin glight ,visibility
and traf ficc onditions.
The sy stem's optical sensor is located behind the
windshield near theo verhead cont rolp anel.
Switching Highbea mAssis tonoro ff #
Toswitc hon:tur nthe light switc htothe
0058 position. #
Switc hthe highbeam on using thec ombina‐
tion switch.
If th eh ighbeam is automaticall yswitched on
in darkness, the00CE indicator lam ponthe
multifunction displa ylights up. #
Toswitc hoff:switc hofftheh ighbeam using
th ec ombination switch. 86
Light and vision

#
Toswitc hpassenger compartment light‐
ing on or off: press button5. #
Toswitc hthe front right reading lam pon
or off: press button 6. #
Toswitc hreading light soninthe
passenger compartment: press button7.
The LED lights up.
Pa ssenger scan switc hthe reading lamps on
and off. #
Toswitc hreading light soffin the
passenger compa rtment: press button 7.
The LED does no tlight up.
Pa ssenger scan no longer operat ethe reading
lamps. Swit
ching ther eading lam pabove the
pa ssenger seat on and of f(bus equipment) #
Toswitc hthe reading lam ponand off:
press button 1. Re
ar interior lighting #
1 Switches rear compartment/cargo com‐
partment lam ponoroff Motion de
tector &
WARNING Risk of inju ryby laser beam
from motion de tector
The motion de tector transmits invisible radia‐
tion from LED s(light-emitting diodes).
These LED sareclassified under the1Ml aser
class and can cause retina dama geinthef ol‐
lowing situations:
R Ifyo ul ook directly int othe unfiltered
laser beam from them otion de tector for
an extende dperiod
R Ifyo ul ook direct lyint ot he laser beam of
th em otion de tector wi thoptical instru‐
mentss uchase yeglasses or amagnifying
gl ass. #
Neverlook directly int othe laser beam. The motion de
tector is loca tedint he cargo com‐
partment behind thep artition ,inthe middle of
th er oof. Light and vision
89

1
Position of motion de tector
If th ev ehicle is equipped wit hamotion de tector,
th ec argo compartmen tlighting is also activated
via them otion de tector.
If th em otion de tector de tects mo vement in the
cargo compa rtment whil ethe vehicle is station‐
ar y, thec argo compartmen tlighting will switch
on fora pproxima tely tw om inutes.
The cargo compartment lighting can be switched
on via them otion de tector if:
R The vehicle is stationar y,thep arking brak eis
applied and youa renotd epressing theb rake
pedal.
R Vehicles with automatic transmission: the
selector le verisinp osition005Dand youa re
no td epressing theb rake pedal.
R The vehicle has no tbeen loc kedf romt he out‐
side using thek ey.
If no chang etot hevehicle, suc hasadoor open‐
ing, is de tected over se veralh ours, them otion
de tector will au tomatically switc hoff.T his pre‐
ve nts theb atter yfromd ischarging. Changing bulbs
Instructions
forc hanging bulbs &
WARNING Risk of bu rnsf romh otcom‐
ponent parts whils treplacing abulb
Bulbs, lamps and plug connector scan
become very hotd uring operation.
When replacing abulb, youc oul db urny our‐
self on these componen tparts. #
Allowthe component parts tocool
down befor ereplacing theb ulbs. When
youa re re placing theb ulb, obser vethef ol‐
lowing:
R Do no tuse an ybulb that has been dropped or
has scratches on its glass sur face. Otherwise,
th eb ulb ma yexplode.
R Theb ulb ma yexplod eifitish otor if you
to uch, drop or sc ratchi t.
R Stains on theg lass sur face reduce the
service lif eofthe bulb. Do no ttouc hthe glass
sur face wi thyour bar ehands. If necessar y,
clea nthe glass sur face wi thalcohol or spirits
in ac olds tate and wipe it down wit halint-
free clo th.
R Protect bulbs from humidity and do no tbring
th em int ocontact wit hliquids.
Alw ayse nsur ethe bulbs ar efirml ysecured.
If yo ur vehicle is equipped wit hLED lamps, you
can checkt his as follo ws :the light cone will mo ve
from toptob ottomand bac kagain when the
ve hicle starts .For this to wo rk,the lo wbeam
needs tohave been switched on befor ethe vehi‐
cle is star ted.
Bulbs and lamps ar eamajor par tofvehicle
saf ety. Therefore, ensur ethat they area lways
wo rking. Ha vetheh eadlam psetting checkedr eg‐
ularly.
R Befor echanging theb ulbs, switc hoffthe
ve hicle's lighting sy stem. This will pr event a
sho rtcircuit.
R Use bulbs only in closed lights that ha vebeen
designed fort hem.
R Use onl yspar ebulbs of thes ame type and
wit hthe cor rect voltage.
If th en ew bulb also does no tlight up, consult a
qu alified specialis tworks hop. Re
placing fron tlight bulbs (vehicles with hal‐
ogen headlamps) Overvie
woffront light sou rcet ypes
Yo uc an replace thef ollowing light sources. 90
Light and vision

Wi
ndshield wipers Switching
thef ront windshield wiper sonand
off 1
00D4 Singlew ipe/wiping wit hwashe rfluid
0047 005AWindshield wipe rsoff
0048 0062 Intermittent wiping, normal
Ve hicles wit hrain sensors: automatic wiping,
normal
0049 0063 Intermit tent wiping, frequent
Ve hicles wit hrain sensors: automatic wiping,
frequent
004A 00AA Continuous wiping, slow
004B 00A9 Continuous wiping, fast#
Turn thec ombination switc htothe cor re‐
sponding position 0047–004B. #
Single wipe/washing: presstheb utton on
th ec ombination switc hinthe direction of
ar row 1.
R 00D3 Single wipe
R 00D4 Wipes wit hwashe rfluid Switching
ther ear windo wwiperon/off 1
00E2 Single wipe/wash
2 00C5 Intermittent wiping #
Single wipe: press button1tothep oint of
re sis tance. #
Wiping with washer fluid: press button 1
be yond thep oint of resis tan ce. #
Toswitc hintermittent wiping on or off:
press button 2.
If th er ear windo wwiper is swit ched on, the
00C5 symbol will appearont he Instrument
Displa y. Re
placing the windshiel dwiper blades &
WARNING Risk of becoming trapped if
th ew indshield wiper sareswitched on
while wiper blades ar ebeing replaced
If th ew indshield wiper sbegin tomo vewhile
yo ua rechanging thew iper blades, youc an
be trapped bythew iper arm. #
Alwayss witc hoffthew indshield wipers
and thei gnition befor echanging the
wiper blades. &
WARNING Risk of inju ryfrom using the
windshield wiper swhile thee ngine hood
is open
When thee ngine hood is open and thew ind‐
shield wiper saresetinm otion, youc an be
trapped bythew iper linkage. #
Alwayss witc hoffthew indshield wipers
and ignition befor eopening thee ngine
hood. Light and vision
95

%
If
th ew iper blades ar eworno ut, they will not
wipe thew indshield proper ly.R eplace the
wiper blades twic eayear,prefera blyin
spring and fall. #
Fold wiper arm 3away from thew indshield. #
Hold wiper arm 3and tur nthe wiper blade
aw ay from wiper arm 3inthed irection of
th ea rrow asfarasitw illg o. #
Slide catch 2upwards in thed irection of the
ar row until it engages. #
Fold bac kthe wiper blade ont othe wiper arm. #
Remo vewiper blade 1from wiper arm. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3.
When doing so, take intoa ccount thed iffe re nt
lengths of thew iper blades:
R Driver's side: long wiper blade
R Front-passenger side: shor twiper blade #
Slide catch 2down wardsu ntil it engages. #
Fold wiper arm 3bac kontot he windshield. Re
placing the windshiel dwiper blades (WET
WIPER SYSTEM) &
WARNING Risk of becoming trapped if
th ew indshield wiper sareswitched on
while wiper blades ar ebeing replaced
If th ew indshield wiper sbegin tomo vewhile
yo ua rechanging thew iper blades, youc an
be trapped bythew iper arm. #
Alwayss witc hoffthew indshield wipers
and thei gnition befor echanging the
wiper blades. &
WARNING Risk of inju ryfrom using the
windshield wiper swhile thee ngine hood
is open
When thee ngine hood is open and thew ind‐
shield wiper saresetinm otion, youc an be
trapped bythew iper linkage. #
Alwayss witc hoffthew indshield wipers
and ignition befor eopening thee ngine
hood. %
If
th ew iper blades ar eworno ut, they will not
wipe thew indshield proper ly.R eplace the
wiper blades twic eayear,prefera blyin
spring and fall. #
Fold wiper arm 3away from thew indshield. #
Hold wiper arm 3and tur nthe wiper blade
aw ay from wiper arm 3inthed irection of
th ea rrow asfarasitw illg o. #
Slide catch 2upwards in thed irection of the
ar row until it engages. #
Remo vewiper blade 1from thew iper ar min
th ed irection of ar row4. #
Carefull yremo vehose 5from thew iper
blade. #
Attach hose 5tothen ew wiper blade. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3.
When doing so, take intoa ccount thed iffe re nt
lengths of thew iper blades:
R Driver's side: long wiper blade
R front-passen gers ide :shor twiper blade #
Slide catch 2down wardsu ntil it engages. #
Fold bac kthe wiper blade ont othe wiper arm. 96
Light and vision

#
Fold wiper arm 3bac kontot he windshield. Re
placing the rear windo wwiperblade #
Fold wiper arm 3away from ther ear win‐
do w. #
Press bo thretainin gclips 2inthed irection
of thea rrow and swivel thew iper blade away
from thew iper arm. #
Pull wiper blade 1upwards out of theh older
on wiper arm 3. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3. #
Push ne wwiper blade 1ontow iper arm 3
until ther etainin gclips engage. #
Fold wiper arm 3bac kontot he rear win‐
do w. Mir
rors Operating
theo utside mir rors &
WARNING Risk of inju ryfrom adju sting
th ev ehicle settings while thev ehicle is in
motion
Yo uc oul dlose control of thev ehicle in the
fo llowing situations:
R ifyo ua djus tthe driver's seat, theh ead
re stra int ,the steering wheel or them irror
while thev ehicle is in motion
R ifyo uf asteny our seat belt whilet hevehi‐
cle is in motion #
Befor estarti ngthee ngine: adjus tthe
driver's seat, theh ead restra int ,the st
eering wheel or them irro ra nd fast en
yo ur seat belt. &
WARNING Risk of accident du etomis‐
judgment of dis tances when using the
passenger mir ror
The outside mir roront he front-passenger
side reflects object sonasmaller scale. The
object sinviewa reinfact closer than they
appear.
As aresult, youm aymisjudg ethe dis tance
between youa nd ther oad user driving behi nd
yo u, fore xamp le, when changing lanes. #
Therefore, alw aysl ook overyour shoul‐
der in order toensur ethat youa re
aw areoft he actual dis tance between
yo ua nd ther oad user sdrivin gb ehind
yo u. Ad
justin gthe outside mir rors manually #
Adjus tthe outside mir rors to thec orrect posi‐
tion manually. #
Toengag eano utside mir rort hat has
been pushed out of position: pushtheo ut‐
side mir rorint op osition manually.
Ad justin gthe outside mir rors electrically Example image
* NO
TEDama getothee lectric outside
mir rors If
yo uf old thee lectric outside mir rors in or
out manuall y,yo um aydamag ethe outside
mir rors and they will no tloc kinp lace prop‐
er ly. Light and vision
97