Example: jump-s
tart connection
% Right-hand driv
evehicle: thej ump-s tart
connection ma ybeonthe opposit eside. #
Remo vethec ove rfromt he positiv eterminal
on thed onor batter y. #
First,c onnec tthe positiv eterminal clam pof
th ej umper cables/charging cables tothe
positiv eterminal of theo ther vehicle's bat‐
te ry. #
With positiv eterminal clamp 2ofthe
jumper cable/charging cable ,slide ther ed
pr otectiv ecap on jump-s tarting connection
1 bac kwithac lockwise turn. #
Connect theo ther positiv eterminal clam pto
th ep ositiv eterminal of jump-s tart connection
1. #
During starting assistance: star tt he engine
of thed onor vehicle and le titrun at idle
speed. #
Firs t, connect then egativ eterminal clam pof
th ej umper cable/charging cable tothen ega‐
tiv ep ole of thed onor batter y. #
Connec tthe other negativ eterminal clam pof
th ej umper cable/charging cable toag round
po int on your ow nv ehicle (a bar emetal part
in thee ngine compartment). #
During starting assistance: star tt he engine
on your ow nv ehicle. #
When charging: star tt he chargin gprocess. #
During starting assistance: lett he engine
ru nf or afew minutes. #
During starting assistance: beforediscon‐
necting thej umper cable, switc honanelec‐
trical consumer on your ow nv ehicle, e.g. the
re ar wind owheater or lighting. When
thes tartin ga ssis tance/charging proces sis
comple te: #
Remo vethej umper cables/charging cables
in reve rseo rder:first then egativ eclam pfrom
th eg round point in thee ngine compartment,
th en then egativ eclam pfromt he donor bat‐
te ry.T he nt he positiv eclam pfromt he posi‐
tiv et erminal of jump-s tart connection 1,
th en thep ositiv eclam poft he donor batter y.
The redp rotectiv ecap springs bac ktoits ini‐
tial position when positiv eterminal clamp 2
is disconnected from jump-s tarting connec‐
tion 1.
Yo uc an obtain fur ther information at aqualified
specialis tworks hop. Installing/removing
thef loor co vering (vehi‐
cles with rear wheel drive) &
WARNING Risk of accident du eto
object sinthe driver's foot we ll
Object sinthe driver's foot we ll ma yimp ede
pedal tr avel or bloc kadepressed pedal.
This jeopardizes theo perating and road
saf etyoft hevehicle. #
Stow all object sinthevehicle securely
so that they canno tget intot he driver's
fo ot we ll. #
Ensur efloor mats and carpets cannot
slip and pr ovide suf ficient room fort he
pedals. #
Do no tlay multiple floor mats or carpets
on topofo ne ano ther. #
Switc hoffall electrical consumers. Breakdown assis
tance 211
#
Toremo ve: unscr ewscrews 3and remo ve
trim 2. #
Remo vefloor co vering 1. #
Toinstall: insertfloor co vering 1 and align
it at theb ase of thed rive r's seat and at the
door sill. #
Put trim 2in place and scr ewscrews 3
bac kin. Disconnecting
thes tar terb attery *
NO
TEDama getoelectrical assemblies Elect
rical assemblies could be damaged if the
st ar terb atter yisd isconnected whil ethe
engine is running. #
Switc hoffthee ngine. Then, release the
batter yclamps of thes tarter batter y. #
Alwaysd isconnect thes tarterb atter yin
th eb atter ycase in thel eftf ootwell firs t.
Otherwise, electrica lassemblies, e.g.
th ea lternator ,could be damaged. *
NO
TEDama getothev ehicle's electron‐
ics If
yo udon otdisconnec tthe batter yasdescri‐
bed here, thev ehicle's electronics could be
damaged. #
Alwaysd isconnect thes tarterb atter yin
fo llowing thes equence, and do not
re ve rset he batter yterminals under any
circums tances. Otherwise, thev ehicle's
electronics could be damaged. Ve
hicles wit hrear wheel drive %
If
th ev ehicle is expected tobe par kedf or an
ex tende dperiod or ou tofuseforl onger than
fo ur we eks, obser vethei nformation on park‐
ing thev ehicle forane xtende dperiod
(/ page 144). #
Vehicles with abatter ymain switch:
re mo vethem ain switc hofthe battery
(/ page121). #
Vehicles without abatter ymain switch:
switc hoffall electrical consumers. #
Switc hoffthee ngine and thep ower suppl y. #
Remo vethef loor co vering (/ page 211). #
Remo vescr ews 1and slide batter ycover
2 inthed irection of thea rrow.
The scr ewsm ustp rotrud eoverthe lar ger
re cesses. #
Remo vebatter ycover 2upwards. #
Firstloosen and remo vethen egativ eterminal
clam pont he batter ysothatthec lam pisno
longer in contact wit hthe term inal. #
Remo vethep ositiv eterminal clam pcover. #
Loose nthe positiv eterminal clam pand fold it
up tothes ide, toge ther wit hthe prefuse box. 212
Breakdown assis tance
Re
moving/installin gthe star terb attery Ve
hicles with rear wheel drive: removing the
st ar terb attery #
Disconnect thes tarter batter y(/ pag e212). #
Remo vebreather hose 1withthe connector
brac ketfromt he connection on thed egassing
co ver. #
Pull out and remo vescr ews 2of brac ket3
up wa rds. #
Slide thes tarter batter yfromi ts anchorag ein
th ed irection of tr avel. #
Foldtheb arsoft hestar terb atter yupwards
and remo vethes tarter batter yfromt he bat‐
te ry box.
Ve hicles with rear wheel drive: installin gthe
st ar terb attery #
Whe nreconnecting thes tarter batter y,
obser vethes afet ym easures and pr otection
no tes( /pag e209). #
Inser tthe star terb atter yintot he batter ybox. #
Fold down theb arsoft hestar terb atter y. #
Slide thes tarter batter yintoi ts anchorag ein
th eo pposit edirection tothed irection of
tra vel. #
Inser tbrack et 3 . #
Tighten scr ews2on brac ket3whic hholds
th eb atter yinp lace. #
Attach breather hose 1withthe connector
brac kettot he connection of thed egassing
co ver. #
Reconnect thes tarter batter y(/pag e212).
Me rcedes-Benz recommends that youh ave the
st ar terb atter yreplaced at aqualified specialist
wo rkshop, e.g. an authorized Mercedes-Benz
Center.
If yo uw ant toreplace thes tarter batter yyourself,
obser vethef ollowing no tes:
R Alwaysr eplace adefectiv estarter battery
wit has tarter batter ywhichm eets thes pe‐
cific requirements of thev ehicle.
R Carryover de tach able parts suc hasthevent
hose, elbo wfittin gort erminal co verfromt he
st ar terb atter ytober eplaced.
R Mak esuret hat thev ent hose is alw aysc on‐
nected toits original openin gonthe battery
side.
Ins tallth ee xisting or newly supplied stop
plugs.
Otherwise, gases or batter yacid could
escape.
R Mak esuret hat thed etachable parts ar econ‐
nec tedint he same wayasb efore. Breakdown assi
stance 213
Disconnecting
thea uxiliar ybattery inthe
engine compa rtment *
NO
TEDama getoelectrical assemblies Elect
rical assemblies could be damaged if the
st ar terb atter yisd isconnected whil ethe
engine is running. #
Switc hoffthee ngine. Then, release the
batter yclamps of thes tarter batter y. #
Alwaysd isconnect thes tarterb atter yin
th eb atter ycase in thel eftf ootwell firs t.
Otherwise, electrica lassemblies, e.g.
th ea lternator ,could be damaged. *
NO
TEDama getothev ehicle's electron‐
ics Incor
rectly disconnecting thea uxiliar ybattery
can cause damag etothevehicle's electron‐
ics. #
Alwaysd isconnect thea uxiliar ybattery
as described in thef ollowing sequence.
Do no treve rset he batter yterminals
under an ycircums tances. #
Obser vethes afet ym easures and pr otection
notices when disconnectin gthe auxiliar ybat‐
te ry ( / pag e209). #
Switc hoffall electrical consumers. #
Switc hoffthee ngine and thep ower suppl y. #
Open theh ood (/ page192). #
Firstloose nand remo vethen egativ eterminal
clam pont he auxiliar ybatter ysot hatthe
cla mp is no longer in con tact wi th thetermi‐
nal. #
Remo vethep ositiv eterminal clam pcover. #
Loose nand remo vethep ositiv eterminal
clamp. To
wing or tow- starting Overvie
wofpermissible towing me thods In
thee vent of abreak down, Mercedes-Benz rec‐
ommends that youh ave thev ehicle transpor ted
ins tead of towe d.
* NO
TEDama getothev ehicle due to tow‐
ing away incor rectly #
Obser vethei nstruction sand no teson
to wing away. %
Ve
hicles with automatic transmission
and rear-wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D.
If th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page217).At ow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. 214
Breakdown assis tance
Pe
rm issible towing me thods Bo
th axle sont he
gr ound Fr
ont axle raised Re
ar axle raised
Ve hicles wit hauto‐
matic transmission and
re ar-wheel drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, if thes teering
wheel is fixe dint he
center position wit ha
st eering wheel lock
Ve hicles wit hall-wheel
drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) No
NoTo
toww ithar aisedaxle: towing should be per‐
fo rm ed byatow ing compan y. To
wing away thev ehicle wit hbotha xleson
th eg round #
Obser vethen otes on permissible towing
me thods (/ page214). #
Mak esuret hat theb atter yisc onnected and
ch arge d.
When theb atter yisd ischar ged, thef ollowing sit‐
uations occur:
R The engine canno tbestarted.
R It is no tpossible torelease or appl ythe elec‐
tric parking brake.
R Vehicles with automatic transmission: the
automatic transmission canno tbeshiftedto
position 005Cor005D.
* NO
TEDama gedue to to wing away at
exc essivel yhigh speeds or overlong dis‐
ta nces The driv
etra in could be damaged when towing
at exc essively high speeds or over long dis‐
ta nces. #
Atow ing speed of 30 mph(50 km/h)
mus tnotbe exc eeded. #
Atow ing distanc eof30miles (50 km)
mus tnotbe exc eeded. %
Ve
hicles with automatic transmission
and rear wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D. If
th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page217).At ow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. &
WARNING Risk of accident whe ntow ing
av ehicle whic histoo heavy
If th ev ehicle being tow- star tedort owed
aw ay is heavier than thep ermissible gross
mass of your vehicle, thef ollowing situations
can occur:
R The towing eyem aybecome de tach ed.
R The vehicle/trailer combination may
swer veoreve noverturn. #
If ano ther vehicle is tow- star tedor
to we da way,its weight mus tnotexc eed
th ep ermissible gross mass of your own
ve hicle. If
av ehicle needs tobe towe dort ow st arted, its
we ight should no tbegreater that thep ermissible
gross mass of thet ow ing vehicle. #
Information on thev ehicle's permissible gross
mass can be found on thev ehicle identifica‐
tion plat e(/pag e252). #
Vehicles with automatic transmission: do
no to pen thed rive r's or co-driver door ,asthe
automatic transmission will automatically
shif ttop osition 005D. #
Installth et ow ing eye( /pag e218). #
Secur ethe towing device. Breakdown assis
tance 215
*
NO
TEDama gedue toincor rect connec‐
tion of thet ow bar #
Onlyconnec tthe towr ope or towb arto
th et ow ing eyes. %
Yo
uc an also secur ethe towing devic etothe
trailer hitch.
* NO
TEDama geand risk of accident when
to wing wit hatow ro pe Ther
eisar isk of an accident if youdon ot
obse rves afet ya nd pr otectiv emeasures when
to wing using atow ro pe.
Obser vethef ollowing points when towing
wit hat ow ro pe: #
Secur ethe towr ope on thes ame side
on bo thvehicles, if possible. #
Mak esuret he towr ope does not
exc eed thel egally prescribed length. #
Mar kthe towr ope in them iddle, e.g.
wit haw hitec loth (30 x30c m). This
makes other road user sawarethat a
ve hicle is being towe d. #
Obser vetheb rake lamps of thet ow ing
ve hicle while driving. Alw aysm aintain a
dis tance that ensures thet ow ro pe does
no ts ag. #
Do no tuse steel cables or chains to tow
yo ur vehicle. Otherwise, youc oul dd am‐
ag et he vehicle. #
Deactivat eautomatic locking (/ page50). #
Do no tactivat ethe HOLD function. #
Deactivat ethe tow- aw ay alar m(/pag e62). #
Deactivat eActiv eBrake Assi st (/ pag e150). #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C. #
Release thep arking brake. &
WARNING Risk of accident du etolimi‐
te ds afet y-re lated function sduring the
to wing process
Saf ety-re lated function sarelimited or no lon‐
ge ra vailable in thef ollowing situations:
R thei gnition is switched off.
R theb rake system or po wersteering sys‐
te mism alfunctioning.
R thee nergy suppl yorthe on-boar delectri‐
cal sy stem is malfunctioning.
When your vehicle is then towe da way,signifi‐
cantly mor eeffor tm aybe requ ired tosteer
and brak ethan is normally required. #
Use atow bar. #
Mak esuret hat thes teering wheel can
mo vefreely ,befor etow ing thev ehicle
aw ay. *
NO
TEDama gedue toexc essiv etractive
po wer If
yo up ullaway sharpl y,thet ractiv epower
ma ybet oo high and thev ehicles could be
damaged. #
Pull away slowl yand smoo thly. To
wing avehicle wit hthe front or rear axle
ra ised *
NO
TEDama gewhen thei gnition is
switched on If
yo ul eave thei gnition switched on when
to wing thev ehicle wit hthe front or rear axle
ra ised, ESP ®
actuation can damag ethe brake
sy stem. #
The ignition mus tbeswitched off. *
NO
TEDama gedue toincor rect remo val
or ins tallation of thep ropeller shafts When ins
talling thep ropeller shafts, they can
be damaged if youdon otuse ne wscrew s.
Alw aysu se ne wscrew sw hen ins talling the
propeller shafts.
Onl yhave thep ropeller shafts ins talled or
re mo vedbyq ualified, skilled personnel. 216
Breakdown assis tance
%
If
th ef ront axle is damaged, raise thev ehicle
at thef ront axle and if ther ear axle is dam‐
aged, raise thev ehicle at ther ear axle.
% Ve
hicles with automatic transmission
and rear-wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D.
If th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page217).At ow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. #
Obser vethen otes on permissible towing
me thods (/ page214). #
Thep rope ller shaf tsto thed rive axles must
be remo vedift he maximum permissible tow‐
ing dis tance is exceeded. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C. #
Release thep arking brake. #
Switc hoffthei gnition. Loading
thev ehicle fort ransport #
Obser vethen otes on permissible towing
me thods (/ page215,216 ). #
Con nect thet ow bar tothet ow ing eyetol oad
th ev ehicle. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C.
% Ve
hicles with automatic transmission: in
th ee vent of damag etothe electrics, the
automatic transmissio nmaybe loc kedin
position 005D.Toshifttop osition 005C,provide
th eo n-boar delectrical sy stem wit hpower
( / pag e209). #
Load thev ehicle ont othe transpor ter. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005D. #
Use thep arking brak etosecurethe vehicle
agains trolling away. #
Only secur ethe vehicle bythew heels. Ve
hicles with all-wheel drive/vehicles with
automatic transmission #
Mak esuret hat thef ront and rear axle scome
to rest on thes ame transpor tatio nv ehicle.
* NO
TEDama getothed rive trai ndueto
incor rect positioning #
Do no tpositio nthe vehicle abo vethe
connection point of thet ranspor tvehi‐
cle. *
NO
TEVehicle damag eduetoimproper
loading An all-wheel driv
evehicle ma ybedamaged if
it is tilted, pushed or mo vedw hile being loa‐
ded using ahydraulic plat form. #
When loading avehicle wit hall-wheel
drive, thev ehicle should onl ybemoved
and positioned byits ownp owe r. #
The vehicle and thes urface it is posi‐
tione dons hould no longer be mo ved
when thek eyisremo vedorift he door
is open. To
wing eyes torage location The
towing eyeisl ocated in thev ehicle tool kit in
th ef ront-passen gerfootwell (/ page219). Breakdown assis
tance 217
*
NO
TEDama geor malfunction scaused by
moisture Moistur
emaycause dama getothee lectrical
sy stem or cause it tomalfunction. #
When thef use bo xisopen, mak esure
th at no moistur ecan enter thef use box. #
When closing thef use box, mak esure
th at thes eal of thel id is positioned cor‐
re ctly on thef use box. If
th en ew fuse whic hhas been inser teda lso
blo ws,have thec ause traced and rectified at a
qu alified specialis tworks hop.
Mak esureoft hefollowing befor ereplacing a
fuse:
R thev ehicle is secured suc hthat it does not
ro llaw ay
R all electrical consume rsares wit ched off
R thei gnition is switched off
The fuses ar elocated in various fuse bo xes:
R fuse bo xinthe front-passenger foot we ll
(/ page219 )
R fuse bo xinthe seat base of thed rive r's seat
(/ page219 ) Opening
thef useb oxinthes eat base of the
dr iver's seat #
Toopen: press down and unclip fasteners 1
on thec over. #
Remo vethec ove r. #
Toclose: pressthec over firm ly in tothes eat
base until fasteners 1clip in. Opening and closing
thef useb oxinthec o-
driver's foot we ll Opening
thef useb ox #
Unlocking andremoving thes towa ge com‐
partment co verint he co-driver's foot we ll
(/ page220). Example:
vehicle tool kit insert #
Liftthe inser tatmarke dp ositions 1. #
Pull thei nser tout of clips 2.
Closing thef useb ox #
Slide thei nser tint oc lips 2. #
Close thei nser tbyp ressing on mar kedp osi‐
tions 1. #
Put on thes towa ge compartment co verint he
co-d rive r's foot we ll and loc kit(/pag e220). Ve
hicl etool kit Information on
thev ehicle tool kit The
vehicle tool kit is located in thes towa ge com‐
partment in thef ootwell on thef ront-passenger
side (/ page220).
The vehicle tool kit contains:
R atow ing eye
R ascrew driver wit hTorx, Phillips and slotted
bits
The vehicle tool kit ma yalso contain thef ollow‐
ing, fore xamp le:
R an open-en dwrench
R awheel wrench Breakd
owna ssis tance 219