2020 MERCEDES-BENZ SLC windshield wipers

When
theengine isrunn ing,thevehicle issta-
tionary andinbright ambient light:ifyou turn
the light switch tothe 0060 position, theday-
time runninglamps andparking lampsswitch
on.
If the engine isrunn ingand youturn thelight
switch to0058,t hemanual settings take prec-
edence overthedaytime runninglamps.
USA only:
The daytime runninglamps improve thevisibil-
ity ofyour vehicle duringtheday. Todo this,
the daytime runninglamps functionmust be
switched onusing theon-board computer
(Y page 177).
If the engine isrunn ingand youturn thelight
switch to0060 or0058,t hemanual settings
take preceden ceover thedaytime running
lamps.
Low-beam headlamps G
WARNIN
G
When thelight switch isset to0058,t he
low-beam headlamps maynotbeswitched
on automatically ifthere isfog, snow or
other causes ofpoor visibility duetothe
weather conditionssuch asspray. Thereisa
risk ofan accident .
In such situation s,turn thelight switch to
0058.
Even ifthe light sensor doesnotdetect thatit
is dark, theparking lampsandlow-beam head-
lamps switch onwhen theignition isswitched
on and thelight switch isset tothe 0058 posi-
tion. Thisisap articularly usefulfunctioninthe
event ofrain andfog.
X To
switch onthe low-beam headlamps:
turn theSmart Keytoposition 0048inthe igni-
tion lock orstart theengine.
X Turn thelight switch to0058.
The green 0058indicator lampinthe instru-
ment cluster lightsup.
Rear foglamp
The rear foglamp improves visibilityofyour
vehicle forthe traff icbehind inthe event of
thick fog.Please takenoteofthe count ry-spe-
cific regulations forthe use ofrear foglamps. X
To switch onthe rear foglamp :turn the
Smart Keytoposition 0048inthe ignition lock
or start theengine.
X Turn thelight switch to0058 or0058.
X Press the005E button .
The yellow 005Eindicator lampinthe instru-
ment cluster lightsup.
X To switch offthe rear foglamp :press the
005E button .
The yellow 005Eindicator lampinthe instru-
ment cluster goesout.
Park inglamp s
! If
the batter ycharge isvery low,thepark-
ing lamps orstandin glamps areautomati-
cally switched offtoenable thenext engine
start .Always parkyourvehicle safelyandin
aw elllitarea, inaccordan cewith therele-
vant legal stipulations. Avoidusingthe0060
parking lampsoveraperiod ofseveral
hours. Ifpossible, switchonthe right- hand
0064 orleft- hand 0063 standin glamps.
X To switch on:turn thelight switch to0060.
The green 0060indicator lampinthe instru-
ment cluster lightsup.
Stand inglamp s
Switc hingonthe standin glamps ensures the
corr esponding sideofthe vehicle isillumina-
ted.
X To switch onthe stand inglamp s:the
Smart Keyisnot inthe ignition lockoritis in
position 0092inthe ignition lock.
X Turn thelight switch to0063 (left-hand side
of the vehicle) or0064 (right- handsideof
the vehicle). 98
Exterior
lightingLightsandwindshield wipers

The
corn ering lampmayremain litfor ashort
time, butisautomatically switchedoffafter no
more thanthree minutes.
Cornering lightfunction withtraffic circle
function:
The corn ering lightfunct ionisactivated on
both sides before enteringatraff iccircle
through anevaluation ofthe current GPSposi-
tion ofthe vehicle. Itremains activeuntilafter
the vehicle hasleftthetraff iccircle. Inthis
way, pedestrians crossingthe road, forexam-
ple, areilluminated byyour vehicle ingood
time. Active
lightfunction
The active lightfunct ionisas ystem that
moves theheadlamps accordingtot he steer-
ing movemen tsof the front wheels. Inthis
way, relevant areasremain illuminated while
driving. Thisallows youtorecogn izepedes-
trians, cyclists andanimals sooner.
Active: whenthelights areswitched on.
Vehicles withLane Keeping Assist:the active
light funct ionevaluates thecourse ofthe lane
in which youaredriving andpre-empt ively
cont rolstheactive lightfunct ion. Adapt
iveHighbeam Assist
General notes You
canusethis funct iontoset the headlamps
to change between lowbeam andhigh beam
automatically. Thesystem recognizesvehicles
with their lights on,either approaching from
the opposite direction ortraveling infront of
your vehicle, andconsequent lyswitches the
headlamps fromhighbeam tolow beam.
The system automatically adaptsthelow-beam
headlamp rangedepending onthe distance to
the other vehicle. Oncethesystem nolonger
detect sany other vehicles, itreactivat esthe
high-beam headlamps.
The system's opticalsensorislocated behind
the windshield neartheoverhead control
panel. Import
antsafety notes G
WARNIN
G
Adaptive Highbeam Assistdoesnotrecog-
nize road users:
R who have nolights, e.g.pedestrians
R who have poorlighting, e.g.cyclists
R whose lighting isblocked, e.g.byab arrier
On very rareoccasions ,Adaptive Highbeam
Assist mayfailtorecogn izeother roadusers
that have lights, ormay recogn izethem too
late. Inthis, orinsimilar situations, theauto-
matic high-beam headlamps willnotbe
deactivated orwill beactivated regardless.
There isar isk ofan accident .
Always carefully observethetraff iccondi-
tions andswitch offthe high-beam head-
lamps ingood time.
Adaptive Highbeam Assistcannottake into
account road,weather ortraff iccondit ions.
Adaptive Highbeam Assistisonly anaid. You
are responsible foradjusting thevehicle's
lighting tothe prevailing light,visibility and
traff iccondit ions.
In particular, thedetect ionofobstacles canbe
restr icted ifthere is:
R poor visibility, e.g.due tofog, heavy rainor
snow
R dirt onthe sensors orthe sensors are
obscured
Switching AdaptiveHighbeam Assist
on/off X
To switch on:turn thelight switch to0058.
X Press thecombinat ionswitch beyond the
pressure pointinthe direction ofarrow 0043.
The 00CE indicator lampinthe multifunct ion
display lightsupwhen itis dark andthelight
sensor activates thelow-beam headlamps.
If you aredriving atspeeds aboveapprox-
imately 16mph (25km/ h):
The headlamp rangeisset automatically
depending onthe distance between the
vehicle andother roadusers.
If you aredriving atspeeds aboveapprox-
imately 19mph (30km/ h)and noother
road users havebeen detect ed: 100
Exterior
lightingLightsandwindshield wipers

The
high-beam headlamps areswitched on
automatically. The0057 indicator lampin
the instr ument cluster alsolights up.
If you aredriving atspeeds belowapprox-
imately 16mph (25km/ h)or other road
users havebeen detect edorthe roads are
adequa telylit:
The high-beam headlamps areswitched off
automatically. The0057 indicator lampin
the instr ument cluster goesout.The00CE
indicator lampinthe multifunct iondisplay
remains lit.
X To switch off:move thecombinat ion
switch backtoits normal position ormove
the light switch toanother position.
The 00CE indicator lampinthe multifunct ion
display goesout. Interior
lighting Overview
ofinterior lighting Overhead
controlpanel
0043 003D Switch esthe left- hand reading lamp
on/of f
0044 0033 Switch esthe automatic interiorlight-
ing cont rolon/of f
0087 003D Switch esthe right- hand reading lamp
on/of f
0085 004A Switch esthe inter iorlighting on/off Interior
lighting control
General notes In
order toprevent thevehicle's batteryfrom
discharging, theinter iorlighting functionsare
automatically deactivatedaftersome time, unless
theSmart Keyisin position 0048inthe
ignition lock.
The color andbrightn essofthe ambient light-
ing are setviathe multimedia system
(Y page 178).
Automa ticinterior lighting control X
To switch on:setthe switch tothe cent er
position.
When theautomatic interiorlighting control
is switched on,the switch isflush withthe
overhead controlpanel.
X To switch off:setthe switch tothe 0033
position.
The inter iorlighting automatically switcheson
if you:
R unlock thevehicle
R open adoor
R remove theSmart Keyfrom theignition lock
The inter iorlighting isswitched onfor aset
time when theSmart Keyisremoved fromthe
ignition lock.Youcanactivate thisdelayed
switch- offusing theon-board computer
(Y page 178). Replacing
bulbs Import
antsafety notes G
WARNIN
G
Bulbs, lampsandconn ector scan get very
hot when operating. Ifyou change abulb,
you could burnyourself onthese compo-
nent s.There isar isk ofinjury.
Allow these compon entstocool down
before changing abulb.
Vehicles withhalogen lamps
Do not use alamp thathasbeen dropped orif
its glass tubehasbeen scratc hed.
The lamp mayexplode if:
R you touch it
R itis hot
R you drop it
R you scratc hit
Only operate bulbsinenclosed lamps
designed forthat purpose. Onlyinstall spare Replacing
bulbs
101Lightsandwindshield wipers Z

bulbs
ofthe same typeandthespecified volt-
age.
Marks onthe glass tubereduce theservic elife
of the bulbs. Donot touch theglass tubewith
your bare hands. Ifnec essary, cleantheglass
tube when coldwithalcohol orspirit andrubit
off with alint- free cloth.
Prot ectbulbs frommoist ureduring operation .
Do not allow bulbs tocome intoc ontact with
liquids.
Only replace thelamps listed(Ypage 102).
Have thebulbs thatyoucann otreplace your-
self replaced ataq ualified specialist work-
shop.
If you require assistan cereplacing lamps,con-
sult aqualified specialist workshop.
If the new lamp stilldoes notlight up,consult
aq ualified specialist workshop.
Bulbs andlamps areanimport antaspect of
vehicle safety.Youmust therefore make sure
that these function correctlyat all times. Have
the headlamp settingchec kedregularly.
Vehicles withLEDhead lamp s
The frontand rear light cluster sofyour vehicle
are equipped withLEDlight bulbs. Donot
replace thebulbs yourself. Contactaqualified
specialist workshopwhich hasthenecessary
specialist knowledge andtools tocarry outthe
work required. Overview:
replacingbulbs/bulb
typ es Halogen
headlamps
0043 Low-beam headlamp: H755W
0044 High- beam headlamp: H755W Repla
cingthefront bulbs
Removing/m ountingthecover inthe
front wheel housing X
To rem ove: switch offthe lights.
X Turn thefron twheels inwards.
X Slide cover 0043upand remov eit.
X To install: reinsertcover 0043and slide it
down untilitengages.
Low-beam headlamp s(halogen head-
lamp s) X
Remove thecover inthe fron twheel hous-
ing (Ypage 102).
X Turn housing cover0043count er-clock wise
and pullitout.
X Push bar0044upwards.
X Remove connector0087with thebulb.
X Pull thebulb outofcon nector0087.
X Inser tthe new bulb intoc onnec tor0087and
place inthe brack etofbar 0044.
Make surethatthebulb isposition edcor-
rect ly.
X Push bar0044downwards. 102
Repla
cingbulbsLights andwindshield wipers

Problems
withthewindshield wipers Problem
Possible
causes/co nsequences and0050 0050
Solutions The
windshield wipers
are jammed. Leaves
orsnow, forexample, maybeobstruct ingthe windshield
wiper movement .The wiper motor hasbeen deactivated.
X For safety reasons, youshould remove theSmartK eyfrom the
ignition lock.
or X Switch offthe engine usingtheStart /Stopbutton andopen the
driver's door.
X Remove thecause ofthe obstruct ion.
X Switch thewindshield wipersbackon. The
windshield wipers
fail completely. The
windshield wiperdriveismalfunction ing.
X Select another wiperspeed onthe combination switch.
X Have thewindshield wiperscheckedataq uali fied specialist
workshop. The
windshield washer
fluid from thespray noz-
zles nolonger hitsthe
cent erofthe wind-
shield. The
spray nozzlesare misaligned.
X Have thespray nozzlesadjusted ataq uali fied specialist work-
shop. Windshield
wipers
105Lightsandwindshiel dwipers Z

Switching
the"windshield defrosting"
function onoroff X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 118).
X To switch on:press the0064 button.
The indicator lampinthe 0064 button lights
up.
The climate controlsystem switches tothe
following functions:
R high airflow
R high temperature
R air distribution tothe windshield andfront
side windows
R <0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[ modeoff
X To switch off:press the0064 button.
The indicator lampinthe 0064 button goes
out. Thepreviously selectedsettingsare
restored. Air-recirculation moderemains
deactivated.
or X Dual-zone automatic climatecontrol:press
the 0058 button.
The indicator lampinthe 0064 button goes
out. Airflow andairdistribution aresetto
automatic mode. MAX
COOL maxim umcool ing
The MAX COOL functionisonly availa blein
vehicles forthe USA.
MAX COOL isonly operational whenthe
engine isrunning.
X To activate: pressthe00C9 button.
The indicator lampinthe button lightsup.
X To deactivat e:press the00C9 button.
The indicator lampinthe button goesout.
The previously selectedsettingsare
restored.
When youactivate MAXCOOL, climate control
switches tothe following functions:
R maximum cooling
R maximum airflow
R <0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[ modeon Removing
condensation fromthe
window s
Windows foggeduponthe inside X
Act ivate the005A or0056 cooling withair
dehumidification function.
X Dual-zone automatic aircondition ing:acti-
vate the0058 mode button.
X Ifthe windows continue tofog up,activate
the 0064 "Windshield defrosting"function.
i You
should onlyselect thissettin guntil the
windshield isclear again.
Windows foggeduponthe outside X
Act ivate thewindshield wipers.
X Air-c onditioning system:pressthe009C or
009B button.
X Dual-zone automatic aircondition ing:press
the 008F button untilthe009C or009B
symbol appears inthe display .
i You
should onlyselect thissettin guntil the
windshield isclear again. Rear
window defroster
General notes The
rear window defroster hasahigh current
draw. Youshould therefore switchitoff as
soon asthe rear window isclear. Otherwise,
the rear window defroster switchesoffauto-
matically afterseveral minutes.
If the battery voltage istoo low, therear win-
dow defroster mayswitch off.
<002400460057004C005900440057004C0051004A001200470048004400460057
004C005900440057004C0051004A> X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 118).
X Press the006C button.
The indicator lampinthe 006C button lights
up orgoes out. Operat
ingthe climate controlsystems
113Climat econtrol

Setting
thecompass North
America zonemap South
America zonemap
X Set your location usingthezone maps.
X Push around peninto opening 0087
(Y page 238)forapproximately threesec-
onds.
The zone current lyselected appearsincom-
pass display 0044(Ypage 238).
X To selec tthe zone: pusharound peninto
opening 0087(Ypage 238)untilthedesired
zone isselected.
If, after afew seconds, thedisplay incom-
pass display 0044(Ypage 238)changes direc-
tion, thezone hasbeen selected. Calibrating
thecompass X
Make surethatthere issufficient spacefor
you todrive inac ircle without impeding
traffic.
In order tocalibrate thecompass correctly,do
the following:
R calibrate thecompass inthe open andnotin
the vicinity ofsteel struct uresorhigh-volt-
age transm issionlines.
R switch offelectrical consumers suchasthe
climate control,windshield wipersorrear
window defroster.
R close alldoors andthetrunk lid.
X Switch onthe ignition.
X Push around peninto opening 0087
(Y page 238)forapproximately sixseconds,
until symbol C C
is shown incompass dis-
play 0044(Ypage 238).
X Drive yourvehicle inaf ull circle atapprox-
imately 3mph(5km/h) to6m ph
(10 km/h).
When thecalibration hassuccessfully been
completed, thecurrent direction isshown in
compass display0044(Ypage 238). Floo
rmats G
WARNING
Object sint he driver's footwell mayrestrict
the clearance aroundthepedals orblock a
depressed pedal.Thisjeopardizes theoper-
ating androad safety ofthe vehicle. Thereis
ar isk ofan accident.
Stow allobject ssecurely inthe vehicle so
that they donot getinto thedriver's foot-
well. When usingfloormats orcarpets, make
sure thatthey areproperly securedsothat
they donot slip orobstruct thepedals. Do
not place several floormats orcarpets on
top ofone another. Features
239Stowageandfeatu res Z

X
Make surethattheignition isswitched off
(Y page 118).
or
X When usingtheSmartK ey,turn theSmart-
Key toposition 0092inthe ignition lockand
remove it(Y page 118).
X Secure thevehicle against rollingaway
(Y page 134).
All indicator lampsinthe instrumen tcluster
must beoff.
The fuses arelocated invarious fuseboxes:
R Fuse boxinthe engine compartmen tonthe
left-hand sideofthe vehicle, whenviewed in
the direction oftravel
R Fuse boxinthe trunk Fuse
boxinthe engine compart ment
i Observe
the"Important safetynotes" sec-
tion (Ypage 266). G
WARNING
When thehood isopen andthewindshield
wipers aresetinmotion, youcan beinjured
by the wiper linkage. Thereisar isk ofinjury.
Always switchoffthe windshield wipersand
the ignition beforeopening thehood. X
Make surethatthewindshield wipersare
turned off.
X Open thehood.
X Use adrycloth toremove anymoisture
from thefuse box.
X To open: openclamps 0044.
X Remove fuseboxcover 0043forwards. X
To close :check whether theseal islying
correct lyin cover 0043.
X Insert cover0043atthe rear ofthe fuse box
into theretainer.
X Fold down cover 0043and close clamps 0044.
X Close thehood. Fuse
boxinthe trunk
i Observe
the"Important safetynotes" sec-
tion (Ypage 266). The
fuse boxislocated inthe trunk behind the
partition covering.
X Open thetrunk lid.
X To open: release cover0043onthe right and
left-hand sideswithaflat object .
X Open cover 0043downwards inthe direction
of the arrow. Fuses
267Breakdown assistance Z