2020 MERCEDES-BENZ SL CLASS door lock

garage
dooropener, contactanauthorized
Mercedes-B enzCenter.
Altern atively, youcan callthefollowing tele-
phone assistance services:
R USA: Mercedes-B enzCustomer Assistance
Center at1-80 0-FOR-MERCedes
R Canada: Customer Serviceat
1-80 0-38 7-0100
R HomeLink ®
hotline 1-800-355-3515(free of
charge)
More informat iononHomeLink ®
and/or com-
patible products isalso availa bleonline at
htt p:// www.homelink.c om.
Notes onthe declaration ofconf ormity
(Y page 28).
USA: FCCID:CB2HMIH L4
Canada: IC:279B -HMIH L4
Import antsafety notes G
WARNING
When youoperate orprogram thedoor with
the integrat edgarage dooropener, persons
in the range ofmovement ofthe door may
become trappedorbe struck bythe door.
There isarisk ofinjury.
When usingtheintegrat edgarage door
opener, alwaysmake surethatnobody is
within therange ofmovement ofthe door. G
DANGER
Combustion enginesemitpoisonous
exhaust gasessuchascarbon monoxide.
Inhaling theseexhaust gasesishazardous to
health andcanresult inpoisoning. Thereisa
risk offatal injury. Therefore, neverleavethe
engine runningan enclosed spacewithout
adequa tevent ilation.
Program ming Program
mingthebutt ons
Pay atten tiontothe "Important safetynotes"
(Y page 263). Garage
doorremote control0083 isnot included
with theintegrat edgarage dooropener.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Select oneofbutton s0044 to0085 touse to
cont rolthe garage doordrive.
X To star tprogr ammingmode: pressand
hold oneofbutton s0044 to0085 onthe integra-
ted garage dooropener.
The garage dooropener isnow inprogram-
ming mode. Afterashort time,indicator
lamp 0043lights upyellow .
Indicator lamp0043lights upyellow assoon
as button 0044,0087or0085 isstored forthe first
time. Ifthe selected buttonhasalready
been programed, indicatorlamp0043will only
light upyellow aftertenseconds have
elapsed.
X Release button0044,0087or0085. Indicator
lamp 0043flashes yellow.
X To progr amthe remote control: point
garage doorremote control0083 towards but-
tons 0044to0085 onthe rear-view mirrorata
distance of2to 8in (5 to 20 cm).
X Press andhold button 0084onremote control
0083 until indicator lamp0043lights upgreen.
When indicator lamp0043lights upgreen:
programming isfinished.
When indicator lamp0043flashes green:pro-
gramming wassuccessful. Thenext step is
to synchron izethe rolling code
(Y page 264).
X Release button0084onremote control0083 for
the garage doordrive system.
If indicator lamp0043lights upred: repeat the
programing procedureforthe correspon ding
button onthe rear-view mirror.Whendoing
so, vary thedistance between remotecon-
trol 0083and therear-view mirror. Featur
es
263Stowage andfeatu res Z

The
required distance between remotecon-
trol 0083and theintegr atedgarage door
opener depends onthe garage doordrive
system. Severalattemptsmight beneces-
sary. Youshould testevery position forat
least 25seconds beforetryinganother posi-
tion.
Synchronizing therolling code
Pay atten tiontothe "Importan tsafety notes"
(Y page 263).
If the garage doorsystem usesarolling code,
you willalso have tosynchron izethe garage
door system withtheintegr atedgarage door
opener inthe rear-view mirror.Todo this you
will need touse theprogramming buttonon
the door drive controlpanel. Theprogramming
button maybelocated indifferent places
depending onthe manufact urer.Itis usuall y
located onthe door drive unitonthe garage
ceiling.
Familiarize yourselfwiththegarage doordrive
operating instructions ,e.g. under "Program-
ming additional remotecontrols", before carry-
ing out thefollowing steps.
Your vehicle mustbewithin reachofthe
garage doororgate opener drive.Makesure
that neither yourvehicle norany persons/
object sare present withinthesweep ofthe
door orgate.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Get outofthe vehicle.
X Press theprogramming buttononthe door
drive unit.
Usually ,you now have 30seconds toinitiate
the next step.
X Get into thevehicle.
X Press previously programed button0044,0087
or 0085 onthe integr atedgarage dooropener
repeatedly untilthedoor closes.
The rolling codesynchron izationisthen
complete.
Notes onprogr ammingthe remot econ-
tr ol
Canadian radiofrequency lawsrequire a
"break" (orinter ruption) ofthe trans mission
signals afterbroadcasting forafew seconds.
Therefore, thesesignals maynotlast long
enough forthe integr atedgarage dooropener.
The signal isnot recogn izedduring program-
ming. Comparable withCanadian law,some U.S.
garage dooropeners alsofeature a
"break".
Proceed asfollows:
R ifyou liveinCanada.
R ifyou have difficulties programming the
garage dooropener (regardless ofwhere
you live) when following theprogramming
steps.
X Press andhold oneofbutton s0044 to0085 on
the integr atedgarage dooropener.
Aft erashort time,indicator lamp0043lights
up yellow.
X Release thebutton .
Indicat orlamp 0043flashes yellow.
X Press button 0084ofgarage doorremote con-
trol 0083for two seconds, thenrelease itfor
two seconds.
X Press button 0084again fortwo seconds.
X Repeat thissequence onbutton 0084of
remote control0083 until indicator lamp0043
lights upgreen.
When indicator lamp0043lights upgreen:
programming isfinished.
When indicator lamp0043flashes green:pro-
gramming wassuccessful. Thenext step is
to synchron izethe rolling code.
X Release button0084ofremote control0083 of
the garage doordrive.
When indicator lamp0043lights upred:
repeat theprogramming processforthe cor-
responding buttononthe rear-view mirror.
When doingso,vary thedistance between
remote control0083 and therear-view mirror.
The required distance between remotecon-
trol 0083and theintegr atedgarage door
opener depends onthe garage doordrive
system. Severalattemptsmight beneces-
sary. Youshould testevery position forat
least 25seconds beforetryinganother posi-
tion.
Problems whenprogramming
If you areexperienc ingproblems programming
the integr atedgarage dooropener onthe rear-
view mirror, takenoteof the following instruc-
tions:
R Check thetrans mitterfrequency usedby
garage doordrive remote control0083 and
whether itis supported. Thetrans mitterfre-
quency canusuall ybe found onthe back of
remote control0083 for the garage doordrive. 264
Featur
esStowage andfeatu res

The
integr atedgarage dooropener iscom-
patible withdevices thathave units which
operate inthe frequency rangeof280 to
433 MHz.
R Replace thebatteries ingarage doorremote
cont rol0083. This increases thelikelihood that
garage doorremote control0083 will trans mit
a stron gand precise signaltothe integr ated
garage dooropener.
R When programming, holdremote control0083
at varying distances andangles frombut-
ton s0044 to0085 which youareprogramming.
Try various anglesatadistance between
2and 8inches (5to20cm) oratthe same
angle butatvarying distances .
R Ifafurther remote control0083 isavailabl efor
the same garage doordrive, repeat the
same programming stepswiththisremote
cont rol0083. Before performin gthese steps,
make surethatnew batteries havebeen
installed ingarage doordrive remote control
0083.
R Note thatsome remote controlsonly trans -
mit foralimited amount oftime (theindica-
tor lamp onthe remote controlgoes out).
Press button 0084onremote control0083 again
before transmission ends.
R Align theanten nacable ofthe garage door
opener unit.Thiscanimprove signalrecep-
tion/ transmission.
Opening/clo singthegara gedoor Aft
erithas been programmed, theintegr ated
garage dooropener performs thefunct ionof
the garage doorsystem remote control.Please
also read theoperating instructions forthe
garage doorsystem.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press either button 0044,0087or0085 which you
have programmed tooperate thegarage
door.
Garage doorsystem withafixed code: indi-
cator lamp0043lights upgreen.
Garage doorsystem witharolling code:indi-
cator lamp0043flashes green.
The trans mitterwill trans mitasignal aslong
as the button ispressed. Thetrans mission
is halted afteramaximum often seconds
and indicator lamp0043lights upyellow.
X Press button 0044,0087or0085 again ifneces-
sary. Clearing
thememor y Make
surethatyouclear thememory ofthe
integr atedgarage dooropener beforeselling
the vehicle.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press andhold button s0044 and 0085.
The indicator lampinitially lightsupyellow
and then green.
X Release buttons0044 and 0085.
The memory ofthe integr atedgarage door
opener inthe rear-view mirroriscleared. Compass
Calling upthe compass Compass
0044display sthe compass directionin
which thevehicle iscurrent lytraveling: N N,
NE NE,
E E,
SE SE,
S S,
SW SW,
W W
or NW NW.
To receive acorrec tdisplay inrear-view mir-
ror 0043, thecompass mustbecalibrated and
the magnetic fieldzone set. Featur
es
265Stowage andfeatu res Z

Setting
thecompass North
America zonemap South
America zonemap
X Set your location usingthezone maps.
X Push around peninto opening 0087
(Y page 265)forapproximately threesec-
onds.
The zone current lyselected appearsincom-
pass display 0044(Ypage 265).
X To selec tthe zone: pusharound peninto
opening 0087(Ypage 265)untilthedesired
zone isselected.
If, after afew seconds, thedisplay incom-
pass display 0044(Ypage 265)changes direc-
tion, thezone hasbeen selected. Calibrating
thecompass X
Make surethatthere issufficient spacefor
you todrive inacircle without impeding
traffic.
In order tocalibrate thecompass correctly,do
the following:
R calibrate thecompass inthe open andnotin
the vicinity ofsteel struct uresorhigh-volt-
age transm issionlines.
R switch offelectrical consumers suchasthe
climate control,windshield wipersorrear
window defroster.
R close alldoors andthetrunk lid.
X Switch onthe ignition.
X Push around peninto opening 0087
(Y page 265)forapproximately sixseconds,
until symbol C C
is shown incompass dis-
play 0044(Ypage 265).
X Drive yourvehicle inafull circle atapprox-
imately 3mph (5km/h) to6mph
(10 km/h).
When thecalibration hassuccessfully been
completed, thecurrent direction isshown in
compass display0044(Ypage 265). Floo
rmats G
WARNING
Object sin the driver's footwell mayrestrict
the clearance aroundthepedals orblock a
depressed pedal.Thisjeopardizes theoper-
ating androad safety ofthe vehicle. Thereis
a risk ofan accident.
Stow allobject ssecurely inthe vehicle so
that they donot getinto thedriver's foot-
well. When usingfloormats orcarpets, make
sure thatthey areproperly securedsothat
they donot slip orobstruct thepedals. Do
not place several floormats orcarpets on
top ofone another. 266
FeaturesStowage
andfeatu res

Where
willIfind...? Warning
triangle
Removi ngthe warni ngtriangle Warni
ngtriangl e0043 isloca tedinabracket on
the insid eof the trunk lid.
X Open thetrunk lid.
X Press catches 0044inthe direction ofthe
bracket andopen thebracket inthe direc-
tion ofthe arrow .
X Pul lthe retai ning clipofwa rning triangl e0043
in the center ofthe bracket, outward.
X Remo vewarning triangl e0043 from the
bracket.
Setting upthe warni ngtriangle X
Fold feet0087dow nand outtothe side .
X Pul lside reflectors 0044upw ards toform atri-
angl eand lock them atthe top using upp er
press -stud 0043. Fi
rst-aid kit First-ai
dkit 0043 isloca tedinthe stowa gewel l
under thetrunk floor.
X Lift the trunk floorupwards (Ypag e255) .
X Remo vefirst-ai dkit 0043.
Che ckthe expira tiondate onthe first-ai dkit at
lea stonce ayea r.Rep lace thecontents ifnec-
essa ry,and replace missi ngitems. Refle
ctive safety jacket
Removi ng/replac ingrefle ctive safety
jackets The
refle ctive safetyjackets areloca tedinthe
safe tyjacket compartments inthe stowa ge
compa rtments ofthe front doors .There are
als osafe tyjacket compartments inthe stow-
age compa rtments ofthe rear doors ,in whi ch
refle ctive safetyjackets canbestowed .
X To remove :pul lout safe tyjacket bag0043
with therefle ctive safetyjacket bythe loop .
X Open safetyjacket bag0043and pullout the
refle ctive safetyjacket. Where
willIfind...?
279Breakdown assistance

i
Jumper
cablesand further inform ationregar dingjum p-startingcan beobt aine dat any quali-
fied spec ialist workshop. Towing
andtow- star tin g Imp
ortant safety notes G
WAR
NING
When towing ortow-s tartingano ther veh icle
and itsweight isgreat erthan theperm issi-
ble grossweight ofyour vehicle,th e:
R theto wing eyecould detach itself
R theveh icle/trailer combinatio ncould roll-
over .
Ther eis arisk ofan acc iden t.
When towing ortow-s tartingano ther veh i-
cle, itsweight shouldno tbe great erthan
th eperm issiblegro ssweight ofyour vehicle.
Det ails ontheperm issiblegro ssveh icle weight
of your vehicle can befoun don theveh icle
iden tificat ion plat e(Y page 323).
! When
ActiveBr ake Assist ,Ac tiveDis tan ce
As sist DISTRO NICortheHOL Dfun ction is
act ivat ed, theveh icle brak esauto matically
in cer tain situatio ns.
To avoid damage totheveh icle,deac tivate
th ese systems inthefollo wing orsimi larsit-
uatio ns:
R when towing theveh icle
R in thecar wash
! On
lysec ure theto w rope ortow bar atthe
to wing eyes. Other wise, theveh icle could be
damage d.
! Do
notuse theto wing eyeforrecover y,
th is could damage theveh icle.If in doubt ,
rec over theveh icle with acr ane.
! When
towing ,pull away slowly and
smo othly. Ifth etract ive power istoohigh ,
th eveh iclescould bedamage d.
! Do
notto w with sling-type equipm ent.This
could damage theveh icle.
! When
towing away vehicleswith KEYLE SS-
GO, usethekey instead oftheSt art /S top
butt on.The auto matictrans miss ionmay
ot her wise shiftto posit ion005Dwhen you open
thedriv er'sor fron t-passe nger door ,
whic hcoul ddamage thetrans miss ion.
! Mak
esure that theelec tric park ingbrak e
is rele ased. Ifth eelec tric park ingbrak eis
fault y,visi ta qualifie dspec ialist workshop.
! You
may tow theveh icle foramax imum
dist anceof 30 miles (50kilomet ers). Ato w-
ing speed of30 mph (50km/h) must notbe
exc eeded .
For towing distancesover 30miles
(50 kilomet ers), theent ireveh icle must be
raise dand trans port ed.
! When
youaretow-s tartingor towing
ano ther veh icle,its weight mustnotexc eed
th emax imum permissiblegro ssweight of
your vehicle.
It is bet terto have theveh icle trans port ed
th an tohave itto wed away.
The auto matictrans miss ionmust beinposi-
tio n005C when theveh icle isbein gto wed away.
The batterymust becon nectedand char ged.
Ot her wise, you:
R can nottur nth eSm artKey toposit ion0048in
th eign itio nloc k
R can notshif tth eauto matictrans miss ionto
posit ion005C
De act ivat eth eauto maticloc kin gfeat ure
befo retheveh icle istowed (Ypage 203). You
coul dot her wise belocked outwhen pushin g
or towing theveh icle. Inst
allin g/rem ovingthetowing eye
Inst allin gth etowing eye G
WAR
NING
The exhaust tailpipe maybeveryhot .Ther e
is arisk ofburn swhen removin gth erear
cov er.
Do notto uch theexh aust pipe. Takepart icu-
lar carewhen removin gth erear cover. Towing
andtow- star tin g
291Break down assistance Z

The
bracket sfor the screw-in towingeyeare
located inthe bumpers. Theyareatthe front
and atthe rear, behind thecovers.
X Remove thetowing eyefrom thevehicle tool
kit (Ypage 280).
X Front bumper:insert afinger intothe
recess onthe botto medge ofcover 0043.
X Pull cover 0043out ofthe bumper towards you
in the direction ofthe arrow.
Cover 0043isattached tothe opening witha
strap.
X Rear bump er:press themark oncover 0043
inwards inthe direction ofthe arrow.
X Remove cover0043from theopening.
X Scr ew inthe towing eyeclock wiseasfar as
it will goand tighten it.
Removing thetowing eye X
Unsc rewand remove thetowing eye.
X Front bumper:position cover0043onthe
opening inthe bumper.
X To close, pressthelower section of
cover 0043.
X Rear bump er:position cover0043with the
tab onthe opening inthe bumper.
X To close, pressthelower section of
cover 0043until itengages.
X Place thetowing eyeinthe vehicle toolkit. Towing
avehicle withboth axles on
the ground G
WARNIN
G
You cannolonger steerthevehicle ifthe
steerin gwheel lockhasbeen engaged.
There isarisk ofan accident .
Always switchoffthe ignition whentowing
the vehicle withatow cable oratow bar.
The automatic transmission shiftstoposition
005D automatically whenyouopen thedriver's
or front -passenger doororwhen youremove
the Smart Keyfrom theignition lock.
In order toensure thattheautomatic trans-
mission staysinposition 005Cwhen towing
away thevehicle, youmust observe thefollow-
ing points:
X Switch onthe hazard warning lamps
(Y page 111).
X Make surethatthevehicle isstation aryand
that theSmart Keyisin position 0092inthe
ignition lock.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock.
On vehicles withKEYLE SS-GO, usethe
Smart Keyinstead ofthe Start /Stopbutton
(Y page 126).
X Depress andhold thebrake pedal.
X Shift thetrans mission toposition 005C.
X Release thebrake pedal.
X Release theelectric parking brake.
X Leave theSmart Keyinposition 0048inthe
ignition lock.
In order tosignal achange ofdirection when
towing thevehicle withthehazard warning
lamps switched on,use thecombinat ion
switch asusual. Inthis case, onlytheindicator
lamps forthe direction oftravel flash.When
you reset thecombinat ionswitch, thehazard
warning flashersstartflashing again.
It is important thatyouobserve thesafety
instr uctions whentowing awayyourvehicle
(Y page 291). Permit
tedtowing methods
Mercedes- Benzrecomm endstransportin gyour
vehicle inthe case ofabreakdown, ratherthan
towing itaway . 292
Towing
andtow-sta rtingBr eakdown assistance

X
Shif tthe trans missionto pos ition 005D.
X Swi tch offthe engi ne.
X Vehi cles without KEYLES S-GO :remo ve
the Smar tKeyfrom theigniti onlock.
X Vehi cles with KEYLES S-GO :ope nthe driv-
er's door.
The vehicleelectro nicsnow have statu s0.
Thi sis the same asthe Smar tKeyhaving
bee nremo ved.
X Vehi cles with KEYLES S-GO :remo vethe
Start/Sto pbu tton from theigniti onlock
(Y page 126 ).
X Ifincl uded inthe vehicleequ ipment, remove
the tire-cha nge tool kitfrom thevehicle.
X Safe guard thevehicleag ainst rolling away.
Se curi ngthe vehic leto preve ntitfrom
rol ling awa y If
yo ur veh icleis equ ipped with awh eel chock,
it can befou ndinthe tire-cha nge tool kit
(Y page 280 ).
The folding wheel chock isan additiona lsa fety
mea sure to pre vent thevehiclefrom rolling
aw ay,for exa mpl ewh en cha nging awh eel .
X Fol dboth plate sup wa rds 0043.
X Fol dou tlo we rpl ate 0044.
X Gu ide the lugs on the lowe rpl ate fullyinto
the openings inba se plate 0087. X
Place chocks orothe rsu ita ble item sund er
the front andrearof the wheel that isdiag o-
nal lyopp ositethe wheel youwi sh to
cha nge.
Rais ingthe vehic le G
WARNI
NG
If yo udo not position the jack corre ctlyat
the appro priate jacki ngpointofthe vehicle,
the jack couldtip ove rwi th the vehicle
rai sed .The reisaris kof inju ry.
Only position the jack atthe appro priate
jacki ngpointofthe vehicle. The base ofthe
jack mustbe pos itioned vertically,di rectl y
und erthe jacki ngpointofthe vehicle.
! Only
position the jack atthe appro priate
jacki ngpointofthe vehicle. Othe rwise, you
cou ldda mag ethe vehicle.
Obs erve thefollowi ng when raising thevehi-
cle :
R To raise the vehicle, only usethe vehicle-
spe cificjack thathasbee nteste dand
ap pro ved byMer cede s-Benz. Ifus ed incor -
rectl y,the jack couldtip ove rwi th the vehi-
cle raised .
R The jack isdes igned only toraise and hold
the vehiclefor asho rttime while awh eel
is bei ng cha nged .It mus tnot beused for
per formi ngmai ntenance workund erthe
veh icle.
R Avoi dcha nging thewheel onuphilland
dow nhillslo pes .
R Befo reraising thevehicle, secu reitfrom
rol ling away by applying the parking brake
and inserting wheel chocks .Do not disen-
ga ge the parking brakewhile the vehicleis
rai sed . Chan
ging awh eel
317Whee lsand tires Z