Page 493 of 609
Mounting dimensions
1
Fastening points
2 Overhang dimension
3 Rear axle centre line The
overhang dimension and fastening points
are valid for a trailer hitch ins talled at thefa c‐
to ry.
Missing values werenot available at the time of
going topress. Model
2
2Overhang dimen‐
sion
All models To
wing capacity The
tongue weight is not included in theto wing
capacity.
Missing values werenot available at the time of
going topress.
To wing capacit y,braked (at a minimum start-
off gradeability of 12%) Model
Towing capacit y,
braked
All models To
wing capacit y,unbraked Model
Towing capacit y,
unbraked
All models Maximum
tongue weight and load capacity *
NO
TEDama gecaused bythe trailer
coming loose If
th eto ngue weight used is too lo w,the
trailer may come loose. #
The tongue weight must not be below
50 kg. #
Use a tongue weight that is as close as
possible tothe maximum permissible
to ngue weight. 490
Tech nical da ta
Page 506 of 609

Display messages
Possible causes/consequences and M
MSolutions
d Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
When you lea vetheve hicle, switch off the ignition, secure theve hicle against rolling away and take theke y with
yo u. #
Ifyo u do not lea vetheve hicle, switch off the electrical consumers, e.g. the seat heating. Otherwise, the12 V
battery may dischar geand it will then be possible tostart theve hicle only with the aid of a second battery
(s ta rting assis tance).
ï Operation only possible in
transmission position P *
The ball neck will not swivel because transmission position h,kor neutral iis selected. #
Dep ress the brake pedal. #
Enga gepark position j.
ï
Trailer coupling in motion *T
he ball neck will retract/ extend.
Do not attem pttospeed up, slow down or initiate the swivel mo vement using your hand, foot or other aids. During
th e swivel mo vement, do not couple a trailer.
When the ball neck has reached an operational position, the display message will disappear.
ï
Check trailer hitch lock *T
he trailer hitch is not operational during a journey with a trailer. &
WARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. Display messages and
warning/indicator lamps 503
Page 515 of 609
Display messages
Possible causes/consequences and M
MSolutions
8 Reserve fuel level *T
he fuel supply has dropped into there ser verange. #
Refuel.
!
Clean the fuel filter *
Ve hicles with diesel engines: the fuel filter is dirty or thewate r inthe fuel filter needs tobe drained. #
Consult a qualified specialist workshop.
ý Replace air cleaner *
Ve hicles with diesel engines: the engine air filter is dirty and must be replaced. #
Consult a qualified specialist workshop. Tr
ansmission Display messages
Possible causes/consequences and M
MSolutions
Only select P when vehicle
is stationary *
It is possible toselect the park position jonly if theve hicle is stationar y. #
Tostop, depress the brake pedal. 512
Displaymessa ges and warning/indicator lamps
Page 516 of 609

Display messages
Possible causes/consequences and M
MSolutions #
Shift the transmission topark position jwhen theve hicle is stationar y.
Apply brake to deselect P
position *
Yo u ha veattem ptedto shift the transmission out of park position jand into ano ther transmission position. #
Depress the brake pedal. #
Select transmission position h,kor neutral i.
Apply brake and start
engine to shift out of P or N *
Yo u ha veattem ptedto shift the transmission out of park position jor neutral iand into ano ther transmission
position. #
Depress the brake pedal. #
Start the engine. #
Change the transmission position.
Apply brake to engage D or
R *
You ha veattem ptedto select transmission position hork. #
Depress the brake pedal. #
Select transmission position hork.
Apply brake to engage R *
You ha veattem ptedto select transmission position k. #
Depress the brake pedal. #
Select transmission position k.
Apply parking brake to
park Visit workshop *
A malfunction has occur red in the emer gency po wer supp lyto park position j. #
Consult a qualified specialist workshop. Display messages and
warning/indicator lamps 513
Page 517 of 609

Display messages
Possible causes/consequences and M
MSolutions #
Untilthen, alw ays select park position jmanually before you swit choff the engine. #
Before leaving theve hicle, apply the electric parking brake.
Risk of vehicle rolling away
Driver's door open Trans-
mission not in P *
The driver's door is not fully closed and transmission position h,kor neutral iis selected.
The vehicle may rollaw ay. #
Select pa rkposition jwhen switching off theve hicle.
Risk of vehicle rolling away
Apply parking brake to park *
The transmission is malfunctioning. Park position jcann otbe selected. #
Park theve hicle safely. #
Use the electric parking brake tosecure theve hicle against rolling away. #
On gradients, turn the front wheels so that theve hicle will rollto wa rdsth eke rb if it starts moving.
Risk of vehicle rolling away
N activated manually No
automatic switch to P *
While theve hicle was at a standstill or driving at very low speed, neut rali was engaged with the engine running
or the ignition switched on.
* NO
TEDama getotheve hicle due toitro lling away When
the ignition is being switched off or the driver's door opened, automatic engagement of park position j
is deactivated.
The vehicle may rollaw ay. #
Beready tobrake. #
Do not lea vetheve hicle unattended. 514
Displaymessa ges and warning/indicator lamps
Page 518 of 609

Display messages
Possible causes/consequences and M
MSolutions #
Depress the brake pedal until theve hicle is stationar y. #
Engage pa rkposition jwhen theve hicle is stationary with the brake pedal depressed. #
Tocontinue driving wi th the brake pedal depressed, select transmission position hork.
N automatically activated
Please engage transmis-
sion position again *
Neutral iwas automatically engaged when theve hicle wasro lling or being driven.
% When you open the driver's door in neutral i, park positionjwill be engaged automaticall y. #
Dep ress the brake pedal until theve hicle comes toast andstill. #
Engage park position jwhen theve hicle is stationary with the brake pedal depressed. #
Tocontinue driving wi th the brake pedal depressed, select transmission position hork.
Reversing not poss. Con-
sult workshop *
The transmission is malfunctioning. The transmission position kcann otbe selected. #
Consult a qualified specialist workshop.
Transmission Malfunction
Stop *
The transmission is malfunctioning. The transmission shifts toneutral iautomatically. #
Stop theve hicle immediately in accordance with the traf fic conditions. #
Depress the brake pedal. #
Enga gepark position j. #
Consult a qualified specialist workshop.
Consult workshop without
changing the transmission
position *T
he transmission is malfunctioning. It is no longer possible tochange the transmission position. #
If transmission position his selected, consult a qualified specialist workshop and do not change the transmis‐
sion position. Display messages and
warning/indicator lamps 515
Page 519 of 609
Display messages
Possible causes/consequences and M
MSolutions #
For all other transmission positions, park theve hicle safely. #
Consult a qualified specialist workshop.
Stop vehicle Leave engine
running Wait Transmission
cooling *T
he transmission is overheating. Pulling away may be temp orarily impaired or not possible. #
Stop theve hicle immediately in accordance with the traf fic conditions. Do not continue driving. #
Lea vethe engine running. #
Wait until the display message disappears before pulling away.
Auxiliary battery malfunc-
tion *T
here is a malfunction in the auxiliary batter y. #
Consult a qualified specialist workshop. #
Untilthen, alw ays select park position jmanually before you swit choff the engine. #
Before leaving theve hicle, apply the electric parking brake. 516
Displaymessa ges and warning/indicator lamps
Page 520 of 609
Brakes
Displ
aymessages
Possible causes/consequences and M
MSolutions
! Parking brake See Owner's
Manual *
The yellow ! indicator lamp is lit. The elect ric pa rking brake is malfunctioning.
To appl y: #
Switch the ignition off and switch it back on. #
Apply the electric parking brake manually (/ page217).
If it is not possible toapply the electric parking brake: #
Consult a qualified specialist workshop. #
Where necessar y,also secure the par kedve hicle against rolling away.
* The yellow ! indicator lamp and there d! indicator lamp are lit. The elect ric pa rking brake is malfunction‐
ing.
To release: #
Swit chthe ignition off and switch it back on. #
Release the electric parking brake manually (/ page217).
or #
Release the electric parking brake automatically (/ page216).
If it is still not possible torelease the electric parking brake: #
Do not continue driving. Consult a qualified specialist workshop. Display messages and
warning/indicator lamps 517