2020 MERCEDES-BENZ GLA SUV boot

F
F
itting t
itting t he ISOFIX or i‑Size c
he ISOFIX or i‑Size c hild r
hild res
estrtraint syst
aint syst em
em
on t
on t he
heleT
leT and r
and r ight r
ight r ear seats
ear seats &
W
WARNING
ARNING Risk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th ere ar seat backrest is not engaged and
loc ked in place, there d lock veri/cation indicator
will be visible. &
W
WARNING
ARNING Risk of inju ryor death if the
permissible gross mass of thech ild and
ch ild restraint system toge ther is excee-
ded.
To o much load may be placed on the ISOFIX
or i‑Size child restraint systems and thech ild
may not be restrained co rrectly in theev ent of
an accident, forex ample. #
Ifth ech ild and thech ild restraint system
to get her weigh more than 33 kg, only
use an ISOFIX or i‑Size child restraint
system wi thwhich thech ild is secured
with theve hicle seat belt. #
Also secure thech ild restraint system
wi th th eTo pTe ther belt, if available. Alw
ays comply with the information about the
mass of thech ild restraint system:
R inthe manufacturer's installation and operat-
ing inst ructions forth ech ild restraint system
used
R on a label on thech ild restraint system, if
present Re
gula rly ch eck that the permissible gross mass
of thech ild and child restraint system is still com-
plied wi th.
When /tting a child restraint system, obse rvethe
fo llowing:
O Always obser vethe cor rect use of the seats
and consider their suitability for attaching a
ch ild restraint system.
ISOFIX child seat securing system
(/ page 68)
or
i‑Size child seat securing system
(/ page 69)
O Always comply with the manufacturer's
installation and operating instructions forthe
ch ild restraint system used.
O Makesure that thech ild's feet do not touch
th e front seat. If necessar y,mo vethe front
seat slightly forw ards.
® When /tting an ISOFIX child restraint sys-
te m, also obser vethefo llowing:
O When using a bab
When using a bab y car seat in w y car seat in weightgr
eight group
oup
0/0+ and a r
0/0+ and a r earw
earwar
ard-f
d-f acing c
acing c hild r
hild res
estrtraint
aint 70
70
Occupant saf
ety

te
ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th ere ar seat backrest is not engaged and
loc ked in place, there d lock veri/cation indicator
will be visible.
When
When /tting /tting a belt-secur
a belt-secur ed c
ed child r
hild r es
estr
traint sy st
aint syst em,
em,
obse rv
observ e t
e the f
he f ollo
ollowing:
wing:
O Always comply with the manufacturer's
installation and operating inst ructions forthe
ch ild restraint system used.
O For a child restraint system in the "Universal"
or "Semi-Universal" categor y,make sure that
th e system has been appr ovedfo rth eve hicle
seat. Obser
vethe no tes under "Suitability of seats
fo r attaching belt-secured child restraint sys-
te ms" (/ page 73).
O When using a w
When using a w eight cat
eight categor
egory 0/0+ bab
y 0/0+ bab y
y
car seat and a w
car seat and a w eight cat
eight categor
egory I r
y I rearw
earw ar
ard-
d-
f
f acing c
acing c hild r
hild res
estrtraint syst
aint syst em on a r
em on a r ear seat:
ear seat:
adjust the front seat so that the seat does
not touch thech ild restraint system.
O When using a w
When using a w eight cat
eight categor
egory I f
y I forw
orw ar
ar d-
d-
f
f acing c
acing c hild r
hild res
estr
traint sy st
aint syst em:
em:remo vethe
head restraint from there specti veseat, if
possible.
ATer thech ild restraint system has been
re mo ved, replace the head restraint immedi-
atel y and adjust all head restraints co rrectl y.
O The backrest of thefo rw ard-facing child
re straint system must, as far as possible, be
re sting on the seat backrest of there ar seat.
O Ifth e head restraint of thech ild seat cannot
be fully extended when it is installed in the
ve hicle, this will result in restrictions on the
maximum size setting forch ild restraint sys-
te ms in weight category II or III. Contact with
thero of when the head
re straint is ful lyex tended and loc ked in place
will not result in any restrictions on use.
O Thechild restraint system must not be put
under strain between thero of and the seat
cushion and/or be /t tedfacing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingl y.
O Thechild restraint system must not be put
under strain bythe head restraint. Adjust the
head restraints as appropria te.
O Make sure that thech ild's feet do not touch
th e front seat. If necessar y,mo vethe front
seat slightly forw ards. #
Installth ech ild restraint system.
The entire base of thech ild restraint system
must al ways rest on the seat sur face of the
re ar seat. #
Always make sure that the shoulder belt strap
is cor rectly routed from the seat belt outlet of
th eve hicle tothe shoulder belt guide on the
ch ild restraint system.
The shoulder belt strap must be routed
fo rw ard from the seat belt outlet. Occupant saf
ety
75 75

The
tailgate can open or close unintentionally in
th efo llowing situations:
R A person's arms or legs are moving in the sen-
sor de tection range, e.g. when polishing the
ve hicle or picking up objects.
R Objects are mo ved or placed behind theve hi-
cle, e.g. the hose of a fuel dispenser, a charg-
ing cable, or lug gage
R Clamping straps, tarp aulins or other co verings
are pulled overth e bumper.
R A pro tective mat with a leng threaching over
th e boot sill down into the de tection range of
th e sensors is used.
R The pr otective mat is not secured cor rectl y.
R Workis being done on the trailer hitch, trailers
or rear bicycle rack s.
Deactivate the function of theke y (/ page 82) or
do not car rytheke y about your person in such
situations. Limiting t
Limiting t
he opening angle of t
he opening angle of t he t
he tailg
ailgate
ate A A
ctiv ctiv ating t
ating t he opening angle limit
he opening angle limit er
er
Yo u can limit the opening angle of theta ilgate in
th eto p half of its opening range up toa point
shortly before the end position. #
Stop the opening procedure of theta ilgate at
th e desired position. #
Press and hold the closing button on theta il-
ga te until you hear a short acoustic signal.
The opening angle limiter will be activated. The
ta ilgate will then stop in the stored position
when opened.
To open theta ilgate full y,pull the handle on the
outside of theta ilgate again aTer it has stopped
automaticall y.
Deactiv
Deactiv ating t
ating the opening angle limit
he opening angle limit er
er #
Press and hold the closing button on theta il-
ga te until two short acoustic signals sound. U
Unloc
nloc king t
king t he t
he tailg
ailgat
ate wit
e wit h t
h the emerg
he emerg encykey
ency key R R
eq eq uir
uir ements:
ements:
R The rear seat backrest has been folded
fo rw ard.
R The load compartment co ver has been
re mo ved. #
Remo vethe emer gency key (/ page 83). 94
94
Opening and closing

#
T
To f
o f old bac
old bac k:
k:pull release handle 1and piv ot
th e seat backrest backwards until it engages. Thr
Thr
ough-loading f
ough-loading f eatur
eature in t
e in the r
he rear benc
ear benc h seat
h seat
(EASY
(EASY -PAC
-P AC K Quic
K Quic kf
kfold)
old) F F
olding t olding t he r
he rear seat bac
ear seat bac kr
kres
est f t forw
orw ar
ards
ds &
W
WARNI NG
ARNI NGRisk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. &
W
W ARNING
ARNING Risk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion. R
As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th e seat backrests are not engaged and loc ked
in place, the lock veri/cation indicator will be red.
Alw ays ensu rethat all vehicle occupants ha ve
th eir seat belts fastened co rrectly and are sitting
proper ly.Pa rticular attention must be paid tochil-
dren.
If yo u no longer requ ire thefo lded-down seat
backrest as a loading area, fold the backrest back
into place. R R
eq eq uir
uir ements:
ements:
R The area into which the seat backrest is folded
is clear.
R Tofold the centre seat backrest forw ards: the
cent reseat backrest has been unloc ked.
R The armrest on the second row of seats is fol-
ded back and the cup holders are em pty.
F
F olding t
olding t he
heleT
leT and r
and r ight seat bac
ight seat bac kr
kres
ests f ts f orw
orw ar
ards
ds
Yo u can fold the centre and outer seat backrests
fo rw ards. Seats and st
owing
123
123

#
Foldthe cor responding seat backrest 1back
until it engages.
LeT LeT and r
and r ight seat bac
ight seat bac kr
kr es
es ts:
ts: ifth e seat bac k-
re st is not engaged and lo cked in place, the
re d lock veri/cation indicator 2will be visi-
ble.
Centr
Centr e seat bac e seat bac kr
krest:
est: ifth e seat backrest is
not engaged and loc ked in place, there d lock
ve ri/cation indicator 3will be visible. Loc Loc
king t king t he r
he release catc
elease catc h of t
h of the centr
he centr e r
e rear seat
ear seat
bac
bac kr
krest
est
R
R eq
equir uir ements:
ements:
R The leT and centre seat backrests are
engage d and joined toget her.
Yo u can lock the centre seat backrest. The centre
seat backrest can then be folded forw ards only
to get her with the leT seat backrest. #
Foldthe centre and leT seat backrests for-
wa rds. #
T To loc
o loc k or unloc
k or unloc k:
k:slide catch 1upwards or
down wards.
A
A djus
djusting t ting t he angle of t
he angle of t he r
he rear seat bac
ear seat bac kr
kres
es ts
ts &
W
WARNING
ARNING Risk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. Seats and st
owing
125
125

#
Open soc ket 0ap 3. #
Inse rtthe plug of the device into 115 V soc ket
1 .
When the on-board electrical system voltage is
su1cient, indicator lamp 2lights up. USB por
USB por
t in t
t in the r
he rear passeng
ear passeng er com
er compar
partment
tment %
Depending on theve hicle equipment, the
design of the st owage compartment and the
number of USB ports in there ar cent recon-
sole may vary.
When theve hicle is switched on, you can charge a
USB device, such as a mobile phone, at USB ports
using a suitable charging cable. W W
ir
ireless c
eless c har
harging of t
ging of t he mobile phone and con-
he mobile phone and con-
nection wit
nection wit h t
h t he e
he e xt
xter
er ior aer
ior aer ial
ial N
No
ot
tes on wir
es on wir elessl
elessly c
y char
har ging t
ging t he mobile phone
he mobile phone &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within. There is a
risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cann ot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe no tes on loading theve hicle. &
W
WARNING
ARNING Risk of /re from placing objects
in the mobile phone st owage compart-
ment
Placing other objects in the mobile phone
st ow age compartment could constitute a /re
hazard. Seats and st
owing
135
135

%
When using a CCS (Combined Charging Sys-
te m) charging cable tocharge with direct cur-
re nt at a combo vehicle soc ket, bo thvehicle
soc ket connections 1and 2are used for
ch arging.
Charging options forth e high-voltage battery
(mode 2, 3 or 4):
R Charging through recuperation while theve hi-
cle is in motion
R Charging with alternating cur rent when sta-
tiona ry:
- at a mains soc ket (mode 2)
- at a wallbox or charging station (mode 3)
R Charging with direct cur rent when stationary
(vehicles with combo vehicle soc kets):
- at a fast charging station (mode 4)
Depending on the count ry-speci/c vehicle equip-
ment and your vehicle's charging cable, single
phase ACcharging is also possible.
Obser vethe di.erent grid requ irements of your
cur rent location when charging. Only use charging
cables which conform tothegr id requiremen ts.Consult a
quali/ed elect rician or your local grid
operator if you ha veany questions.
It is recommended that youch arge the high-volt-
age battery at a wallbox or charging station due to
th e impr ovedch arging per form ance and better
ch arging e1ciency o.ered.
S
S t
to
o wing t
wing t he c
he char
harging cable
ging cable
Alw ays st owtheve hicle charging cable in the
ch arging cable bag pr ovided and secure it in the
boot or load compartment of your vehicle.
Otherwise, thech arging cable is not su1ciently
secured.
Syst Syst em limits
em limits
The po wer output of the high-voltage battery may
be impaired bythefo llowing:
R High or low outside temp eratures
R Electrical auxiliary consumers in theve hicle
being switched on, e.g. operating the air con-
ditioning system
R Extended periods without charging The
charging time of the high-voltage battery may
be increased bythefo llowing:
R High or low outside tempe ratures
R Extended periods without charging
R The maximum available charge cur rent of the
ch arging facility
R The charging cur rent set (mode 2) in the multi-
media system (/ page 306) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery at t
y at t he
he
mains soc ke
mains soc ket (mode 2)
t (mode 2) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toa mains
soc ket using incor rectly ins talled component
parts could cause a /re or an electric shoc k,
fo rex ample. #
Only connect thech arging cable to a
mains soc ketth at:
R Has been proper lyinstalled and Driving and parking
203
203

R
Has been inspec tedby aqu ali/ed elect ri-
cian #
For saf etyre asons, only use charging
cables that ha vebeen tested and
appro vedby the manufacturer forch arg-
ing the high-voltage battery in an electric
ve hicle. #
Never use damaged charging cables. #
Do not extend thech arging cable. #
Do not use adap ters. #
Obser vethe saf ety no tes in the operat-
ing inst ructions forth ewa llbox. If
ch arging at a wallbox without pre-ins talled
cable, use the optionally available charging cable
fo rwa llbox and charging station (mode 3). The
ch arging cable is st owed in a bag in the boot/
luggage compartment.
Only use charging cables that ha vebeen tested
and appro vedby the manufacturer forch arging
th e high-voltage battery in an electric vehicle. &
D DAN
AN GER
GER Risk of fatal injuries due todam-
aged components
Connecting thech arging cable toach arging
station using a damaged component part
could cause a /re or an elect ric shoc k,for
ex ample. #
Forch arging stations with a preinstalled
ch arging cable:
R Perform a visual check of thech arg-
ing station for obvious faults, such as
massive damage tothe housing or
ch arging cable. #
Forch arging stations without a preinstal-
led charging cable:
R For saf etyre asons, only use charging
cables that ha vebeen tested and
appro vedby the manufacturer for
ch arging the high-voltage battery in
an electric vehicle.
R Never use damaged charging cables.
R Do not extend thech arging cable.
R Do not use adap ters. #
Make sure toobser vethe saf ety in form a-
tion on thech arging station. Most
charging stations must be activated before
th ech arging process, e.g. using an RFID card.
Obser vethe on-site operator's inst ructions forthe
ch arging station.
The amount of ene rgy dispensed forth ech arging
process, shown bythech arging station, may be
higher than the amount of energy actually absor-
bed bythe high-voltage batter y.This is there sult
of di.erent le vels of charging losses and is descri-
bed as rech arge e1ciency. Charging losses occur,
fo rex ample, due toheat that builds up when
ch arging or from auxiliary consumers that are
switched on. Further information on rech arge e1-
ciency can be obtained at a quali/ed specialist
wo rkshop. Driving and parking
205 205