2020 MERCEDES-BENZ GLA SUV seats

F
F
itting
itting 0oor
0oormats
mats #
Slide the cor responding seat backwards and
lay the 0oor mat in thefo ot we ll. #
Press studs 1onto holders 2. #
Adjust the cor responding seat.
R
R emo
emo ving
ving 0oor
0oor mats
mats #
Pull the 0oor mat o. holders 2. #
Remo vethe 0oor mat. 138
138
Seats and st
owing

If
th e battery is insu1cient lych arge d, the stand-
ing lights or parking lights will be switched o.
automatically tofacilitate the next engine start.
The exterior lighting (e xcept standing and parking
lights) will switch o. automatically when the driv-
er's door is opened.
R Obser vethe no tes on sur round lighting
(/ page 147).
A
A ut ut omatic dr
omatic dr iving lights function
iving lights function
When theve hicle is switched on, the standing
lights, low beam and daytime running lights are
switched on automatically depending on the light
conditions. &
W
WARNING
ARNING Risk of accident when the
dipped beam is switched o. in poor visi-
bility
When the light switch is set toà ,the
dipped beam may not be switched on auto-
matically if there is fog, snow or other causes
of poor visibility such as spr ay.#
In such cases, turn the light switch to
L . The automatic driving lights are only an aid.
Yo u
are responsible forve hicle lighting.
Switc Switc hing t
hing t he r
he rear f
ear f og lights on or
og lights on or o.
o.
R
R eq
eq uir
uir ements:
ements:
R The light switch is in theL orà posi-
tion. #
Press the R button.
Please obser vethe count ry-speci/c la wsonthe
use of rear fog lamps.
R
R egulating headlam
egulating headlam p r
p rang
ang e (halog
e (halog en headlam
en headlam ps)
ps)
The headla mprange adjuster all owsyo uto adjust
th e cone of light from the headlamps in relation to
th eve hicle's load condition. g
Driver's seat and front passen ger seat occu-
pied
1 Driver's seat, front passenger seat and rear
seats occupied
2 Driver's seat, front passen ger seat and rear
seats occupied, load compartment laden
3 Driver's seat and front passen ger seat occu-
pied and maximum permissible rear axle load
utilised 140
140
Light and sight

A
Vehicles with THERM ATIC operating unit
(with/wi thout stationary heater): _sets
th e air distribution
Ve hicles with THERM OTRO NIC operating unit
(with/wi thout stationary heater): q
adjusts temp erature on front passenger side Oper
Oper
ating t
ating t he climat
he climat e contr
e control syst
ol system
em Switc
Switc
hing climat
hing climat e contr
e control
olon/o.
on/o. #
T
To switc
o switc h on:
h on:setthe air0ow toleve l 1 or
higher using theH button. #
T
To switc
o switc h
ho.:
o.: setthe air0ow toleve l 0 using
th eH button.
If climate control is switched o., the windo ws
may mist up more quickl y.Switch climate control
o. only brie0 y. Switc
Switc
hing t
hing t he A/C function
he A/C function on/o.
on/o. using t
using the air
he air
conditioning contr
conditioning contr ol panel
ol panel The A/C
function heats, cools and dehumidi/es
th eve hicle's interior air. #
Press the¿/Á button.
Switch o. the A/C function only brie0y; other-
wise, the windo wsmay mist up more quickl y.
Condensation may drip from the underside of the
ve hicle when cooling mode is active. This is not
indicati veof a fault. Calling up t
Calling up t
he air conditioning menu
he air conditioning menu Calling up t
Calling up t
he air conditioning menu using t
he air conditioning menu using t he
he
multimedia syst
multimedia syst em
em #
Select one of thete mp erature displa ysatthe
lo we r edge of the media displa y.
Calling up t
Calling up t he air
he air-conditioning menu using t
-conditioning menu using t he
he
butt
butt on on t
on on t he climat
he climat e contr
e control panel
ol panel #
Press theA button on the climate control
panel. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the A/C function via t
he A/C function via t he
he
multimedia syst
multimedia syst em
em Multimedia system:
4 Climate menu 5
First row of seats
The A/C function heats, cools and dehumidi/es
th eve hicle's interior air. #
Select A/C. Se Se
tting climat
tting climat e contr
e control t
ol to aut
o aut omatic mode
omatic mode In automatic mode,
the set temp erature is con-
trolled and maintained at a constant le velby the
air suppl y. #
Press theà button. #
T
To switc
o switc h t
h to manual mode:
o manual mode: pressthe_ or
à button.
In automatic mode, you can choose between /ve
di.erent air quantities using theH button.
Au tomatic mode is retained. Climate control
159
159

Se
Se
tting t
tting t he air dis
he air distr tribution
ibution Multimedia system:
4 Climate menu #
Call up the air conditioning menu
(/ page 159). #
Select a row of seats. #
T
To se
o se t t
t the air dis
he air dis tr
tribution:
ibution: select¯,P
or O. #
Set the air0o w.
% Several air distribution options can be selec-
te d at the same time, forex ample toset the
climate cont rolfo rth e windscreen and the
fo ot we lls simultaneousl y.
The ¯ climatecont rolfo rth e windscreen
can only be selected forth e /rst seat row. Switc
Switc
hing t
hing t he sync
he sync hr
hronisation functiononisation function on/o.
on/o. via
via
t
t he air conditioning contr
he air conditioning contr ol panel
ol panelClimate control can be set centrally using
the syn-
ch ronisation function. The temp erature and air
distribution settings forth e driver's side will be adop
ted automatically forth e front passenger
side. #
Press the0 button.
The synchronisation function will be deactivated if
th e settings for one of theot her climate zones are
ch anged. Switc
Switc
hing t
hing t he sync
he sync hr
hronisation function
onisation function on/o.
on/o.via
via
t
t he multimedia syst
he multimedia syst em
em Multimedia system:
4 Climate menu 5
First row of seats
Climate cont rol can be set centrally using the syn-
ch ronisation function. The driver's settings for
te mp erature, air quantity and air distribution are
adop ted automatically for all climate zones. #
Select SYNCand switch on or o.. Demis
Demisting t
ting the windo ws
he wind ows W
W
indow
indow s mist
s mist ed up on t
ed up on t he inside
he inside #
Press theà button. #
Ifth e windo wscontinue tomist up: press the
¬ button.
W
W indow
indow s mist
s mist ed up on t
ed up on t he outside
he outside #
Switch on the windscreen wipers. #
Press theà button. Switc
Switc
hing air
hing air -r
-recir
ecir culation mode
culation mode on/o.
on/o. #
Press theg button.
The interior air will be recirculated.
Air-recirculation mode automatical lyswitches to
fresh air mode aTer a while.
% If air-re circulation mode is switched on, the
wind ows may mist up more quickl y.Switch on
ai r-re circulation mode only brie0y. Switc Switc
hing r
hing r esidual heat
esidual heat on/o.
on/o. R
R
eq
eq uir
uir ements:
ements:
R theve hicle is par ked.
% Only vehicles with a diesel engine can use
re sidual heat. 160
160
Climate cont
rol

The maximum load capacity is calculated from
the
we ight of the bicycle rack and the bicycle rack
load.
Obser vethe no tes on driving with a roof load,
trailer or fully laden vehicle (/ page 174).
When using a bicycle rack , set the tyre pressure
fo r increased load on there ar axle of theve hicle.
Fu rther information on the tyre pressure can be
fo und in the tyre pressure table (/ page 381).
N
No ot tes on loading
es on loading
The lar gerth e distance between the load's centre
of grav ity and the ball head, thegr eater the load
on the trailer hitch.
Therefore, obser vethefo llowing no tes:
R mount heavy bicycles as close totheve hicle
as possible
R always distribute the load on the bicycle rack
as evenly as possible across theve hicle's lon-
gitudinal axis
Mercedes-Benz recommends removing all de tach-
able parts from bicycles (e.g. bask ets, ch ild seats,
re ch arge able batteries) before loading them onto
th e bicycle rack . This will impr ovethe aerody- namic
resis tance and centre of grav ity of the bicy-
cle rack.
Alw ays secure the bicycles toprev ent them from
moving around and check them at regular inter-
va ls to ensure that they are secure.
Do not use tarp aulins or other co vers. The driving
ch aracteristics and rear view may be impaired. In
addition, aerodynamic resis tance and the load on
th e trailer hitch will increase. Load distribution on
the bicycle rack
1 Vertical distance between centre of grav ity
and ball head 2
Horizontal distance between centre of grav ity
and ball head
3 The centre of grav ity is on theve hicle's cent re
axis
Obser vethefo llowing information when you are
loading the bicycle rack with up tothre e bicycles:
Loading t
Loading t he bicy
he bicycle r
cle rack
ack T
T
o
o t
tal w
al w eight
eight
of bicy
of bicy cle
cle
r
r ac
ac k and load
k and load Max. dist
Max. dist
ance
ance
1
1 Max. dist
Max. dist
ance
ance
2
2
Up to75 kg 420 mm 300 mm V
V
ehicle to
ehicle towing ins
wing ins tr
tr uctions
uctions
The vehicle is not suitable forth e use of tow bar
systems that are used for 0at towing or dinghy
to wing, forex ample. Attach ing and using tow bar
systems can result in damage totheve hicle.
When you are towing a vehicle with tow bar sys-
te ms, safe driving characteristics cann otbe guar-
anteed forth eto wing vehicle or theto we dve hicle.
The vehicle-trailer combination may swer vefrom
side toside. Driving and parking
283
283

Switc
Switc
hing t
hing t he r
he reading light on and
eading light on and o.
o.#
Brie0y mo vea hand up or down beneath the
inside rearview mir ror.
The reading light is switched on or o. forthe
driver or the front passenger. Switc
Switc hing t
hing t he searc
he searc h light on and
h light on and o.
o. #
T
T o switc
o switc h on:
h on:reach across the front
passenger seat with a hand.
The sear chlight is switched on forth e driver. #
T
T o switc o switc h
ho.:
o.: take a hand back away from the
front passenger seat.
The search light is switched o. again. Inf
Inf
or
ormation on
mation on pr
pro/les,
o/les, t
themes, sugg
hemes, sugg es
estions andtions and
fav
fav our
our it
ites
es Fo
r electrically adjustable seats obser vethefo l-
lowing no tes. &
W
WARNING
ARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat aTer
calling up a driver pro/le
Selecting a user pro/le may trigger an adjust-
ment of the driver's seat tothe position sa ved
under the user pro/le. You or other vehicle
occupants could be injured in the process. #
Make sure that when the position of the
driver's seat is being adjus ted via the
multimedia system, no people or body
parts are in the seat's range of mo ve-
ment.
If th ere is a risk of someone becoming trap-
ped, stop the adjustment process immedi-
atel y: #
a)Tapth ewa rning message onthe
media displa y.
or #
b) Press a memory function position but-
ton or a seat adjustment switch on the
driver's door.
The adjustment process will be stopped. 300 300
MBUX multimedia system

If one or more tyre sizes precede a tyre pressure,
th efo llowing tyre pressure information is only
va lid forth ose tyre sizes and their respecti veload
condition.
If th e preceding tyre sizes are complemented by
th e+ symbol, the tyre pressure information
fo llowing sho wsalternative tyre pressures. Fuel
consum ption may then increase slightl y.
The load conditions "pa rtially laden" and "fully
laden" are de/ned in theta ble for di.erent num-
bers of passengers and amounts of luggage. The
actual number of seats may di.er from this. T T
yr
yr e pr
e pr essur
essur e monit
e monit or
oring syst
ing syst em
em F
F
unction of t
unction of t he tyr
he tyre pr
e pressur
essur e monit
e monit or
oring syst
ing syst em
em
The system checks the tyre pressure and the tyre
te mp erature of the tyres /t tedtotheve hicle by
means of a tyre pressure sensor.
The tyre pressure and the tyre temp erature
appear in the on-board computer (/ page 382).
If th ere is a substantial pressure loss or if the tyre
te mp erature is excessive, you will be warned with
display messages (/ page 475) ortheh wa
rning lamp in the inst rument cluster
(/ page 499).
The tyre pressure monitoring system is only an
aid. It is the driver's responsibility toset the tyre
pressure tothere commended cold tyre pressure
suitable forth e operating situation.
In most cases, the tyre pressure monitoring sys-
te m will automatically update the new refere nce
va lues aTer you ha vechanged the tyre pressure.
Yo u can, ho wever, also update there fere nce val-
ues byrestarting the tyre pressure monitoring
system manually (/ page 383).
Syst
Syst em limits em limits
The system may be impaired or may not function
particular lyin thefo llowing situations:
R incor rect refere nce values were ta ught in
R sudden pressure loss caused byafo re ign
object penetrating the tyre, forex ample
R there is a malfunction caused byano ther radio
signal source Chec
Chec king t
king t he tyr
he tyr e pr
e pressur
essur e wit
e with t
h the tyr
he tyr e pr
e pressure
essure
monit
monit or
oring sy
ing sy st
stem
em
R
R eq
eq uir
uir ements:
ements:
R The vehicle is switched on.
On-board computer: 4 Service 5
Tyres
One of thefo llowing displa ysappears:
R Current tyre pressure and tyre temp erature of
th e individual wheels: R
Tyre pressures will be displayed after a few
minutes of driving 382 382
Wheels and tyres

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Close theta ilgate.
Anti-theft alarm system
Malfunction *T
he anti-theT alarm system is malfunctioning. #
Consult a quali/ed specialist workshop.
_
2nd seat row, left Not
locked *T
he leT-hand seat or the seat backrest in the second row of seats is not engaged. #
Foldthe cor responding seat backrest back until it engages and push thero w of seats back (/ page 111). #
Make sure that the seat is engaged (/ page 111).
_
2nd seat row, right Not
locked *T
heright-hand seat or the seat backrest in the second row of seats is not engaged. #
Foldthe cor responding seat backrest back until it engages and push thero w of seats back (/ page 111). #
Make sure that the seat is engaged (/ page 111).
¥
Top up washer fluid *T
hewasher 0uid le vel in thewa sher 0uid reser voir has dropped below the minimum. #
Top up thewa sher 0uid (/ page 347).
Wiper malfunctioning *The windscreen wiper is malfunctioning. Displ
aymessages and warning/indicator lamps
443
443