%
When using a CCS (Combined Charging Sys-
te m) charging cable tocharge with direct cur-
re nt at a combo vehicle soc ket, bo thvehicle
soc ket connections 1and 2are used for
ch arging.
Charging options forth e high-voltage battery
(mode 2, 3 or 4):
R Charging through recuperation while theve hi-
cle is in motion
R Charging with alternating cur rent when sta-
tiona ry:
- at a mains soc ket (mode 2)
- at a wallbox or charging station (mode 3)
R Charging with direct cur rent when stationary
(vehicles with combo vehicle soc kets):
- at a fast charging station (mode 4)
Depending on the count ry-speci/c vehicle equip-
ment and your vehicle's charging cable, single
phase ACcharging is also possible.
Obser vethe di.erent grid requ irements of your
cur rent location when charging. Only use charging
cables which conform tothegr id requiremen ts.Consult a
quali/ed elect rician or your local grid
operator if you ha veany questions.
It is recommended that youch arge the high-volt-
age battery at a wallbox or charging station due to
th e impr ovedch arging per form ance and better
ch arging e1ciency o.ered.
S
S t
to
o wing t
wing t he c
he char
harging cable
ging cable
Alw ays st owtheve hicle charging cable in the
ch arging cable bag pr ovided and secure it in the
boot or load compartment of your vehicle.
Otherwise, thech arging cable is not su1ciently
secured.
Syst Syst em limits
em limits
The po wer output of the high-voltage battery may
be impaired bythefo llowing:
R High or low outside temp eratures
R Electrical auxiliary consumers in theve hicle
being switched on, e.g. operating the air con-
ditioning system
R Extended periods without charging The
charging time of the high-voltage battery may
be increased bythefo llowing:
R High or low outside tempe ratures
R Extended periods without charging
R The maximum available charge cur rent of the
ch arging facility
R The charging cur rent set (mode 2) in the multi-
media system (/ page 306) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery at t
y at t he
he
mains soc ke
mains soc ket (mode 2)
t (mode 2) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toa mains
soc ket using incor rectly ins talled component
parts could cause a /re or an electric shoc k,
fo rex ample. #
Only connect thech arging cable to a
mains soc ketth at:
R Has been proper lyinstalled and Driving and parking
203
203
S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
# Lights up
orangeInter
ruption in
ch arging
# Lights up
green Charging
process com-
ple
ted
# Flashesred
(for appr ox.
90 s) Ve
hicle mal-
function;
ch arging is
not possible S S
t
tar
ar ting t
ting t he alt
he alt er
ernating curr
nating curr ent c
ent char
harging pr
ging pr ocess
ocess
(mode 2/3)
(mode 2/3) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage. If
th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage due toove rheating of
ch arging cable and charging cable con-
nector During
thech arging process, thech arging
cable and charging cable connector can heat
up within their permissible limit values. The permissible limit
values are in0uenced by
th efo llowing factors:
R the po wer supply system and thech arging
cable are not damaged
R the inst ructions for handling thech arging
cable and the control element on the
ch arging cable ha vebeen obser ved #
Ifth ech arging cable or charging cable
connector becomes too hot, ha vethe
po we r supply system checked. *
N NOOTE TE Damaged or dirty vehicle soc ket
when the soc ket 0ap is open #
Alwayske ep the soc ket co ver and the
soc ket 0ap closed when there is no
ch arging cable connected. This pr otects
th eve hicle soc ket from dirt and damage. #
Make sure that the soc ket co ver is
closed proper lybefore closing the soc ket
0ap. This can otherwise result in damage
which may pr event the soc ket 0ap from
being opened again. 210
210
Driving and parking
Combo 2 v
Combo 2 v
ehicle socket
ehicle soc ket #
Press charging inter ruption button 2.
or #
Unlock theve hicle.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked. %
Vehicles only equipped with a type 2 vehicle
soc ketfo rAC charging ha veno charging inter-
ru ption button 2. #
Remo vethech arging cable connector from
th eve hicle soc ket within 30 seconds.
ATer the 30 seconds ha veelapsed, theve hicle
soc ket will be loc ked again.
% Ifyo u cannot remo vethech arging cable con-
nector, repeat the unlocking procedure. If the
ch arging cable connector is still loc ked, con-
ta ct a quali/ed specialist workshop. #
Close the soc ket co ver and the soc ket 0ap. #
Remo vethech arging cable connector from
th e mains soc ket, or from the soc ket on the
wa llbox/charging station, and st owtheve hi-
cle's charging cable safely in theve hicle
(/ page 201).
% ATer thech arging cable connector has been
disconnected, the% indicator lamp 1on
th eve hicle soc ketre mains lit for some time
before switching o.. S
S
t
tar
ar ting t
ting t he dir
he dir ect curr
ect curr ent c
ent c har
harging pr
ging process ocess
(mode 4)
(mode 4) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage.
If th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. 214
214
Driving and parking
Do not use cruise control in
thefo llowing situa-
tions:
R in tra1c situations which requ ire frequent
ch anges of speed, e.g. in heavy tra1c, on
winding roads
R on slippery roads. Accelerating can cause the
drive wheels tolose traction and theve hicle
could then skid.
R when visibility is poor
F
F unction of t
unction of t he limit
he limiter
er
The limiter restricts the speed of theve hicle. To
re duce the speed tothe set speed, the limiter
applies the brakes automaticall y.
Yo u can limit the speed as follo ws:
R V
V ar
ar iable:
iable: for a short-term speed restriction,
e.g. in built-up areas
R P
Per
er manent
manent :
:fo r a longer-term speed restric-
tion, e.g. in winter ty remode
Yo u can store any speed abo ve20 km/h up tothe
maximum design speed or up tothe set winter
tyre limit. You can also per form settings while the
ve hicle is stationary if theve hicle has been star-
te d. Obser
vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 225).
Mer
Mer cedes‑
cedes‑ AMG v
AMG vehicles:
ehicles: the limiter is available
up toa maximum speed of 250 km/h.
Displ ay
Display s in t
s in the Ins
he Instr trument Display
ument Display
R È (gre y): variable limi ter is selected but not
yet activated.
R È (0ashes grey ):va riable limi ter is temp o-
rari lypassive.
R È (gre en): variable limi ter is activated.
A stored speed appears along with theÈ dis-
pla y.The segments in the speedome ter light up,
up tothe cur rently stored speed.
If yo u depress the accelerator pedal be yond the
pressure point (kickdown), theva riable limi ter
switches topassive mode. The Limiter passive
message appears in the Instrument Display and
th eÈ display 0ashes. The
variable limi ter is reactivated in thefo llowing
situations:
R Ifth eve hicle speed drops below the stored
speed.
R Ifth e stored speed is called up.
R Ifyo u store a new speed.
Oper
Oper ating cr
ating cr uise contr
uise control or t ol or the v
he var
ariable limit
iable limit er
er &
W
WARNING
ARNING Risk of accident due tostored
speed
If yo u call up the stored speed and this is
lo we rth an your cur rent speed, theve hicle
decelerates. #
Take into account the tra1c situation
before calling up the stored speed. R
R
eq
eq uir
uir ements:
ements:
Cruise control R Cruise control is selected.
R ESP ®
must be activated, but not inter vening.
R The vehicle speed is at least 20 km/h.
R The transmission is in position h.236
236
Driving and parking
Deactiv
Deactiv
ating cr
ating cr uise contr
uise contr ol or t
ol or the v
he var
ariable limit
iable limit er
er #
Select Owiththe leT rock er switch.
% Ifyo u brake, deactivate ESP ®
or if ESP ®
inter-
ve nes, cruise cont rol is deactivated. The varia-
ble limi ter is not deactivated.
Inf
Inf or
ormation on t
mation on t he per
he permanent limit
manent limit er
er
If th eve hicle should ne verex ceed a speci/c
speed (e.g. for driving in winter tyre mode), you
can set this speed with the permanent limiter.
Yo u do this by limiting the speed between
160 km/h and 240 km/h in the multimedia sys-
te m (/ page 238).
Shortly before the set speed is reached, it
appears in the Instrument Displa y.When you con-
/rm the message, display messages no longer
appear until you switch o. theve hicle. The speed
will only be displ ayed again once theve hicle has
been restar ted or if the set speed is changed.
The permanent limi ter does not switch topassive
mode even during kickdown and the driven speed
re mains below the set speed. Se
Se tting t
tting t he limit speed f
he limit speed f or wint
or winter tyr
er tyres
es
Multimedia system:
4 © 5
Settings 5
Vehicle
5 Winter tyres limit #
Select a speed or deactivate the function. A
A
ctiv
ctiv e Dist
e Dist ance Assis
ance Assist DIS t DISTR
TRONIC
ONIC F F
unction of A unction of A ctiv
ctive Dist
e Dist ance Assis
ance Assist DIS t DISTR
TR ONIC
ONIC
Ac tive Distance Assist DISTRONIC maintains the
set speed on free-0owing roads. If vehicles in
front are de tected, the set distance is maintained,
if necessar y,until theve hicle comes toa halt. The
ve hicle accelerates or brakes depending on the
distance totheve hicle in front and the set speed.
The speed and distance totheve hicle in front are
set and sa ved using the steering wheel.
Av ailable speed range:
R V
Vehicles wit
ehicles wit hout Dr
hout Driving Assist
iving Assist ance P
ance Pack
ackag
age:
e:
20 km/h - 200 km/h
R V
Vehicles wit
ehicles wit h Dr
h Driving Assist
iving Assist ance P
ance Pack
ackag
age:
e:
20 km/h - 210 km/h Other
features of Active Distance Assist
DISTRONIC:
R Adjusts the driving style depending on the
selected drive prog ram (fuel-saving, comfor ta-
ble or dynamic)
R Initiates acceleration tothe stored speed if the
turn signal indica tor is switched on tochange
to theove rtaking lane
R V
Vehicles wit
ehicles wit h Dr
h Driving Assist
iving Assist ance P
ance Pack
ackag
age:
e:
- Reacts tostationa ryvehicles de tected in
urban speed ranges (e xcept bicycles and
mo torc yc les)
- Take s one-sided overtaking restrictions
into account on mo torw ays or on multi-
lane roads with separate car riag ewa ys
(countr y-dependent)
V
V ehicles wit
ehicles wit h Dr
h Driving Assist
iving Assist ance P
ance Pack
ackag
age and
e and
P
P ar
ar king P
king P ack
ackag
age:
e: ifth eve hicle has been braked to
a standstill on multi-lane, separate car riag ew ays
by Active Distance Assist DISTRONIC, it can auto-
matical lyfollow theve hicle in front when driving
o. again within 30 seconds. If a critical situation
is de tected when driving o., a visual and acoustic
wa rning is given indicating that the driver must 238 238
Driving and parking
now
take cont rol of theve hicle. The vehicle is not
accelerated any fu rther.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 225).
A
A ctiv
ctiv e Dist
e Dist ance Assis
ance Assis t DIS
t DISTR
TRONIC display
ONIC display s in t
s in the
he
Ins
Ins tr
trument Display
ument Display Assis
tance graphic
1 Route-based speed adap tation: type of route
ev ent (/ page 243)
2 Vehicle in front
3 Distance indicator 4
Set speci/ed distance
5 Active Lane Change Assist lane change dis-
play
P
P er
er manent st
manent st atus displa
atus displa y of A
y of A ctiv
ctive Dist
e Dist ance
ance
Assis
Assis t DIS
t DISTR
TRONIC
ONIC
R k (white): Active Distance Assist
DISTRONIC selected, speci/ed distance set
R k (white vehicle, green speedome ter):
Ac tive Distance Assist DISTRONIC acti ve,
speci/ed dis tance set and vehicle de tected
R k (gre en): Active Distance Assist
DISTRONIC acti ve, speci/ed dis tance set and
ve hicle de tected
R r: Route-based speed adap tation acti ve
( / page 243).
The stored speed is shown along with the perma-
nent status display and highlighted on the speed-
ome ter. When Active Distance Assist DISTRONIC
is passive, the speed is grey ed out.
% On mo torw ays or high-speed major roads, the
gr een ç vehicle symbol is displ ayed cycli-
cally when theve hicle is ready topull away. %
Ifyo u depress the accelerator pedal be yond
th e setting of theAc tive Distance Assist
DISTRONIC, the system is switched topassive
mode. The çsuspended message
appears in the Instrument Displa y.
Displa
Displa y on t
y on the speedomet
he speedomet er
er
The stored speed is highlighted on the speedome-
te r. Ifth e speed of theve hicle in front or the
speed adjustment forth ero ute event ahead is
less than the stored speed, the segments in the
speedome ter light up. The Instrument Display
sho ws th e deactivation of Active Distance Assist
DISTRONIC, as well as alterations tothe speed
due tomanual or automatic adoption of the maxi-
mum permissible speed.
Syst
Syst em limits em limits
The system may be impaired or may not function
in thefo llowing situations, forex ample:
R In sno w,rain, fog, heavy spr ay, if there is glare,
in direct sunlight or in greatly varying light
conditions.
R Ifth ere is swirling dust, e.g. when driving o.-
ro ad or on sandy sur faces. Driving and parking
239
239
ular
the data pr otection regulations, in your
countr y.
Fo rth is reason, before using the dashcam
inform yourself about there gulation de tails for
th ere specti vecount ry.
This function is not permitted in all countries. #
Obser vethe count ry-speci/c regula-
tions. Selecting a USB de
Selecting a USB de
vice f
vice f or a video r
or a video r ecor
ecording with
ding with
t
t he dashcam
he dashcam R
R
eq
eq uir
uir ements:
ements:
R Atleast one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam #
Select the USB device.
% When USB devices contain multiple partitions,
re corded video /les are not alw ays displa yed
in there cording list. Mercedes-Benz
recommends that you use
USB devices with one partition. S
S
t
tar
ar ting or st
ting or st opping video r
opping video r ecor
ecording wit
ding wit h t
h the
he
dashcam
dashcam R
R
eq
eq uir
uir ements:
ements:
R A USB device is connected with the multime-
dia system .
R The vehicle is switched on.
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam #
If se veral USB devices are connected with the
multimedia system, select a USB device
(/ page 315). #
Select theIndividual recording orLoop
recording recording mode.
If Individual recording is selected andthe
memory is full there cording stops.
If Loop recording has been selected, se veral
short video /les are recorded. When the mem-
ory limit is reached, the oldest video /le is dele
ted and recording is continued automati-
call y. #
T To st
o st art
art::select Start recording.
The length of there cording is shown. The
Please do not remove the storage medium.
message appears. The video /le is stored on
th e USB device. #
T To end:
o end: selectEnd recording .
A report may appear in thefo llowing cases:
R Forth eIndividual recording recording mode:
th e memory is full or there are only a few
minutes recording time available. The video
re cording stops or will be stopped imminent ly.
Change the USB device or dele tea video /le.
R If a video recording has star ted and a national
border is de tected, theNational border
crossed. Please observe the countryspecific
regulations regarding video recording. mes-
sage appears.
This function is not available in all countries.
R The camera is not functional, theCamera
unavailable message appears. MBUX multimedia system
315 315
%
Websites cannot be shown while theve hicle is
in motion. Ov
Ov
er
ervie
vie w of smar
w of smar tphone int
tphone int egr
egration
ation Wi
th Sma rtphone Integ ration, you can use cer tain
functions on your mobile phone via the multime-
dia system displa y.
Only one mobile phone at a time can be connec-
te d via Smartphone Integ ration tothe multimedia
system. Also for use with two phone mode with
smartphone integ ration, only one additional
mobile phone can be connec ted using Blue tooth ®
with the multimedia system.
The full range of functions for Smartphone Inte-
gr ation is only possible with an Internet connec-
tion. The appropriate application must be down-
loaded on the mobile phone touse Smartphone
Integ ration. The mobile phone must be switched
on and connec tedto a USB port with theç
symbol on the multimedia system using a suitable
cable.
Apps for Smartphone Integ ration
R Apple CarPlay ® R
Android Auto
% For saf etyre asons, the /rst activation of
Smartphone Integ ration on the multimedia
system must be car ried out when theve hicle
is stationary and the parking brake is applied.
Yo u can start Apple CarPlay ®
or Android Auto
from the device manager.
% Mercedes-Benz recommends disconnecting
th e connecting cable only when theve hicle is
stationar y.
Ov
Ov er ervie
vie w of tr
w of tr ansf
ansferr
erred v
ed v ehicle data
ehicle data
When using Smartphone Integ ration, cer tain vehi-
cle data is transfer redto the mobile phone. This
enables youto get the best out of selected mobile
phone services. Vehicle data is not directly acces-
sible.
The following system information is transmitted:
R SoTware release of the multimedia system
R System ID (anonymised)
The transfer of this data is used tooptimise com-
munication between theve hicle and the mobile
phone. To
do this, and toassign se veralve hicles tothe
mobile phone, a vehicle identi/er is random lyge n-
erated.
This has no connection totheve hicle identi/ca-
tion number (VIN) and is dele ted when the multi-
media system is reset (/ page 306).
The following driving status data is transmitted:
R Transmission position engaged
R Distinction between par ked, standstill, rolling
and driving
R Day/night mode of the inst rument clus ter
R Drive type
The transfer of this data is used toalter how con-
te nt is displa yedto cor respond tothe driving sit-
uation.
The following position data is transmitted:
R Coordinates
R Speed
R Compass direction
R Acceleration direction MBUX multimedia system
327 327