2020 MAZDA MODEL MX-5 lights

[x] Cancel search: lights

Page 347 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) NOTE
To prevent the battery from being
discharged, do not leave the trunk open
for a long period when the engine is not
running.
▼Illuminated Entry System
The overhead lights turn on when any of
the

Page 362 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) Remarks:
*1 The engine oil and filter must be changed at least once a year or within 12,000 km (7,500 miles) since last
engine oil and filter change. Re set the engine oil data whenever replacing the

Page 364 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) Canada residents
Maintenance IntervalNumber of months or kilometers (miles), whichever comes first.
Months 6 12 18 24 30 36 42 48 54 60 66 72
×1000 km 8 16 24 32 40 48 56 64 72 80 88 96
×1000 miles

Page 368 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) ▼Schedule 2
Maintenance IntervalNumber of months or kilometers, whichever comes first
Months 3 6 9 12 15 18 21 24 27 30 33 36
×1000 km 5 10 15 20 25 30 35 40 45 50 55 60
Drive belts I
Engine oil &

Page 369 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) C: Clean
T : Tighten
D : Drain
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.
*

Page 398 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) Light Bulbs
Overhead lightSide turn signal lights
High-mount brake light
Trunk light
Front side-marker lights
Front turn signal lights
Headlights (Low/High beam)
P
arking lights
Daytime running lights

Page 399 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) CAUTION
When removing the lens or lamp unit using
a flathead screwdriver, make sure that the
flathead screwdriver does not contact the
interior terminal. If the flathead screwdriver
contacts the termi

Page 400 of 564

MAZDA MODEL MX-5 2020  Owners Manual (in English) 3. Turn the screw counterclockwise andremove it, and then partially peel back
the mudguard.
 
4. Turn the socket and bulb assemblycounterclockwise and remove it.
5. Disconnect the bulb from the socket