2020 MAZDA MODEL CX-9 battery

[x] Cancel search: battery

Page 515 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) NOTE
If you elect to perform maintenance yourself or have your vehicle serviced at a location
other than an Authorized Mazda Dealer, Mazda requires that all fluids, parts and materials
must meet Mazda

Page 533 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) Engine Compartment Overview
Engine oil dipstick
Brake fluid reservoir
Engine oil-filler cap
Fuse blockBattery
Cooling system capEngine coolant reservoir
Windshield washer fluid reservoir
Maintenance a

Page 544 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) Battery
WA R N I N G
Wash hands after handling the battery and related accessories:
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals
known to the State of Ca

Page 545 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) Keep all flames and sparks away from open battery cells because hydrogen gas is
produced from open battery cells while char ging the battery or adding battery fluid:
Flames and sparks near open batter

Page 546 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) Key Battery Replacement
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter be

Page 547 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) 2. Twist a tape-wrapped flatheadscrewdriver in the direction of the
arrow and open the cover slightly.
Cover
3. Insert the tape-wrapped flatheadscrewdriver into the gap and slide it in
the direction o

Page 548 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) 6. Insert a new battery with the positivepole facing up, and then cover the
battery with the battery cap.
7. Close the cover.
8. Reinsert the auxiliary key.
Ty p e  B
1. Remove the lower cover whilepr

Page 549 of 706

MAZDA MODEL CX-9 2020  Owners Manual (in English) 5. Remove the cap using thetape-wrapped flathead screwdriver.
6. Remove the battery usingtape-wrapped flathead screwdriver.
7. Insert a new battery into the transmitter
so that the positive pole is fa