2020 MAZDA MODEL CX-9 warning

Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of
all tires. This information identifies and descri bes the fundamental characteristics of the tire
and also provides a tire identification number for safety standard certification and in case of
a recall.
▼ Information on Passenger Vehicle Tires
Please refer to the sample below.
1. TIN: U.S. DOT tire identification number
2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Run-flat tire
7. Rim diameter code
8. Load index & speed symbol
9. Severe snow conditions
10. Tire ply composition and materials used
11. Max. load rating
12. Tread wear, traction and temperature grades
13. Max. permissible inflation pressure
14. SAFETY WARNING
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
8-25
CX-9_8HT8-EA-19I_Edition2_old
2019-9-24 13:14:55

Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades
represent the tire's ability to stop on wet pave ment as measured under controlled conditions
on specified government test surfaces of asphalt and concrete. A tire marked C may have
poor traction performance.
Te m p e r a t u r e : The temperature grades are A (the highest), B and C, representing the tire's
resistance to the generation of heat and its ability to dissipate heat when tested under
controlled conditions on a specif ied indoor laboratory test wheel.
Snow Tires
In some heavy snow areas, local governments may require true snow tires, those with very
deeply cut tread. These tires should only be used in pairs or placed on all four wheels. Make
sure you purchase snow tires that are the same size and construction type as the other tires
on your vehicle.
SAFETY WARNING
The following safety warning appears on the tire's sidewall.
SERIOUS INJURY MAY RESULT FROM:
EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-MATCH
TIRE DIAMETER TO RIM DIAMETER; NEVE R EXCEED 40 psi (275 kPa) TO SEAT
BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNT TIRES.
TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/
DAMAGE-FOLLOW OWNER'S MANUAL AND PLACARD IN
VEHICLE-FREQUENTLY CHECK INFLATION PRESSURE AND INSPECT FOR
DAMAGE.
▼ Information on Temporary Tires
Please refer to the sample below.
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
8-28
CX-9_8HT8-EA-19I_Edition2_old
2019-9-24 13:14:55

Personalization Features
The following personalization features can be set or changed by the customer or an Author-
ized Mazda Dealer. Consult an Auth orized Mazda Dealer for details.
Additionally, some of the personalization features can be changed by the customer depend-
ing on the feature.
Personalization features and settings which can be changed differ depending on the market
and specification.
Personalization features which can be changed may change without notice depending on
software updates.
Settings Change Method
Settings can be changed by operating the center display screen.
A: Refer to Settings on page 5-78.
B: Refer to Fuel Economy Monitor on page 4-106.
C: Refer to Active Driving Display on page 4-56.
Settings can be changed by operating the vehicle switches.
D: Refer to Auto Lock/Unlock Function on page 3-17.
E: Refer to Transmitter on page 3-5.
F: Refer to Locking, Unlockin g with Request Switch (With the advanced keyless function)
on page 3-14.
Settings can be changed by an Authorized Mazda Dealer.
Item FeatureFactory Set-
ting Available Set-
tings Settings
Change
Method
Safety
Advanced Smart
City Brake Sup-
port (Advanced
SCBS) (page
4-167)
Smart City
Brake Support
(SCBS) (page
4-170)
Smart Brake
Support (SBS)
(page 4-173) The system can be changed so that Advanced
Smart City Brake Support (Advanced SCBS)/
Smart City Brake Support (SCBS)/Smart Brake
Support (SBS) does not operate.
*1
On On/Off A
―
The distance at which the collision warning ac-
tivates can be changed. Med. Near/Med./Far A
―
The volume of the collision warning can be
changed. High High/Low/Off A
―
Lane-keep As-
sist System
(LAS) & Lane
Departure Warn-The system can be changed so that the steering
wheel assist does not operate.
On On/Off A―
Specifications
Personalization Features
9-9
CX-9_8HT8-EA-19I_Edition2_old 2019-9-24 13:14:55

ItemFeatureFactory Set-
ting Available Set-
tings Settings
Change
Method
ing System
(LDWS) (page
4-156) When the steering
wheel operation assis-
tance is turned on
The sensitivity of the
steering assistance for
the Lane-keep Assist
System (LAS) & Lane
Departure Warning
System (LDWS) can
be changed.
High High/Low A
―
The system can be
changed so that the
lane departure warn-
ing does not activate.On On/Off A
―
When the steering
wheel operation assis-
tance is turned offThe warning timing in
which the Lane-keep
Assist System (LAS)
& Lane Departure
Warning System
(LDWS) system deter-
mines that the vehicle
may be deviating from
its lane can be
changed.
At At/Before A
―
The sensitivity of the
warning for the
Lane-keep Assist Sys-
tem (LAS) & Lane
Departure Warning
System (LDWS) can
be changed.Often Often/Rare A
―
The type of Lane-keep Assist System (LAS) &
Lane Departure Warning System (LDWS)
warning can be changed. Vibration
Vibration/Beep/
Rumble. A
―
The warning intensity/
volume of the
Lane-keep Assist Sys-
tem (LAS) & Lane De-
parture Warning Sys-
tem (LDWS) system
can be changed. Vibration Low High/Low A
―
Rumble.Low High/Mid/Low A ―
BeepLow High/Low A ―
Blind Spot Mon-
itoring (BSM)
(page 4-121)The system can be chan
ged so that Blind Spot
Monitoring (BSM) does not operate.*1On On/Off A ―
Warning beep volume*2HighHigh/
Low/ Off A
―
Specifications
Personalization Features
9-10
CX-9_8HT8-EA-19I_Edition2_old 2019-9-24 13:14:55

ItemFeatureFactory Set-
ting Available Set-
tings Settings
Change
Method
Distance Recog-
nition Support
System (DRSS)
(page 4-133) The system can be changed so that Distance
Recognition Support Syst
em (DRSS) does not
operate.*1On On/Off A ―
The distance at which the vehicle ahead and
your vehicle indicated in the display flashes in
white can be changed. Near Far/Med./Near A
―
Traffic Sign
Recognition
System (TSR)
*3
(page 4-127)The Traffic Sign Recognition System (TSR)
can be set to inoperable.
*1On On/Off A
―
The warning pattern of the excessive speed
warning can be changed. OffOff/
Vi s u a l /
Audio & Visual A
―
The activation timing for the excessive speed
warning can be changed.00/5/10 A
―
360° View Mon-
itor (page 4-175) Setting can be changed so that the 360° view
monitor is automatically displayed when the
ignition is switched to ON.
Off On/Off A
―Setting can be changed so that the display of
the estimated forward line of progress is not
displayed. On On/Off A
―
Setting can be changed so that the top view/
front view displayed while the vehicle is mov-
ing in the forward direction after reversing is
not displayed. On On/Off A
―
Parking sensor
system (page
4-234)Display*4/non-display
On On/Off A
―
Ve h i c l e
Door locks
(page 3-17)Operation condition of
auto lock/unlock func-
tion Lock: When
Driving Un- lock: IGN Off Lock: Out of
Park Unlock: In Park/
Lock: Shifting Out of Park/
Lock: When
Driving Unlock: In Park/
Lock: When
Driving Unlock: IGN Off/
Lock: When Driving/ Off AD
Specifications
Personalization Features
9-11
CX-9_8HT8-EA-19I_Edition2_old
2019-9-24 13:14:55

ItemFeatureFactory Set-
ting Available Set-
tings Settings
Change
Method
Auto-light con-
trol (page 4-68) Timing by which lights turn on Medium High/
Med. High/ Medium/
Med. Low/ Low A
―
High Beam Con-
trol System
(HBC) (page
4-118) Operational/non-operational
*1On On/Off A
―
Adaptive Front
Lighting System
(AFS) (page
4-117)Operational/non-operational
*1On On/Off A
―
Lights-on re-
minder*8 (page
7-47) Warning beep volume High High/Low/Off A
―
Coming home
light (page 4-71)Time until headlights turn off 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off A
―
Leaving home
light (page 4-71) Operational/non-operational On On/Off A
―
Turn indicator
(page 4-73)Beep volume High High/Low A
―
Three-flash turn
signal (page
4-74)Operational/non-operational On On/Off A
―
Ambient Light-
ing (page 5-94)Ambient lights brightness*9MediumBright/
Medium/ Dim/
Off
*10
A ―
Rear window
defogger (page
4-78) The operation time for the rear window defog-
ger can be changed.
15 minutes15 minutes/
Continuous
*11――
System
Language Language indicated in display US EnglishDepends on
market
*12A ―
Temperature Temperature unit in dicated in display °F °F/°C A ―
Distance Distance unit indicated in display mi or km mi/km A―
Specifications
Personalization Features
9-13
CX-9_8HT8-EA-19I_Edition2_old 2019-9-24 13:14:55

ItemFeatureFactory Set-
ting Available Set-
tings Settings
Change
Method
Fuel Economy Monitor (page 4-106)
Ending display Display/non-display Off On/Off B ―
Fuel economy
resetting proce-
dure
*
Linkage/non-linkage with fuel economy reset
and trip meter A resetOff On/Off B
―
Active driving display (page 4-56)
Display Setting can be changed so that the Active Driv-
ing Display is not displayed.
On On/Off C
―
The display height (up/down position) can be
changed. 013 steps up/
down from ini-
tial setting (total: 27 steps) C
―
The method for adjusti ng the display bright-
ness (automatically/manually) can be changed. Auto Auto/Man. C
―
The standard brightness with the automatic
brightness adjustment can be changed. 02 steps up/down
from initial set- ting (total: 5
steps) C
―
The standard brightness with the manual
brightness adjustment can be changed. 020 steps up/
down from ini-
tial setting (total: 41 steps) C
―
The display angle can be changed. 03steps up/down
from initial set- ting (total:7steps) C
―
The street name display tim ing can be changed. On-Dem. On-Dem./At
Maneuver/Off C
―
Display/non-display of the navigation guidance On On/Off C ―
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. Thevolume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*3 This system functions only when the navigation system is functioning.*4 When the ultrasonic sensors detect an obstruction, the co ntents indicated on the center display switches to the
360°View Monitor. (Vehicles with 360°View Monitor)
*5 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.*6 If the setting is changed to Off, the following oper ation is performed according to the headlight switch
position:
At position: Headlights turn off immediately after the ignition is switched off.
Specifications
Personalization Features
9-14*Some models.
CX-9_8HT8-EA-19I_Edition2_old 2019-9-24 13:14:55

Index
A
Accessory Socket.............................. 5-98
Active Driving Display..................... 4-56
Adaptive Front Lighting System
(AFS)............................................... 4-117
Add-On Non-Genuine Parts and
Accessories........................................ 8-19
Advanced Key
Advanced keyless entry system... 3-10
Operational range........................ 3-11
Advanced Key Removed from Vehicle
Warning Beep.................................... 7-48
Advanced Smart City Brake Support
(Advanced SCBS)........................... 4-167
Collision warning.... .................. 4-169
Stopping the Advanced Smart City
Brake Support (Advanced SCBS)
system operation........................ 4-169
Air Bag Systems............................... 2-69
Air Bag/Seat Belt Pretensioner System
Warning Beep.................................... 7-47
Antilock Brake System (ABS).......... 4-99
Armrest Box.................................... 5-105
Audio Control Switch Adjusting the Volume.................. 5-16
Seek Switch................................. 5-16
Audio Set Android Auto™........................... 5-45
Apple CarPlay............................. 5-42
Applications................................. 5-80
AUX.............................................5-36
Bluetooth®.................................. 5-49
Radio............................................5-28
Satellite Radio........ ..................... 5-32
Settings........................................ 5-78
Troubleshooting.......... ................. 5-81
USB............................................. 5-37
Voice Recognition.... ................... 5-75
Volume/Display/Sound
Controls....................................... 5-25
Audio System Antenna........................................5-19
Appendix..................................... 5-87
Audio Control Switch................. 5-16
Audio Set..................................... 5-20
AUX/USB mode..........................5-17
Before Using the Audio
System......................................... 5-16
AUTOHOLD..................................... 4-93
AUTOHOLD Warning Beep.............7-49
Automatic Transaxle......................... 4-59 Active Adaptive Shift (AAS)...... 4-61
Automatic transaxle controls....... 4-59
Driving tips..................................4-67
Manual shift mode.......................4-62
Shift-lock system...... ................... 4-60
Transaxle ranges.......................... 4-60
B
Battery............................................... 6-32 Maintenance.................................6-33
Replacement................................ 6-33
Specifications.................................9-4
Battery Runs Out.............................. 7-19 Jump-starting............................... 7-19
Blind Spot Monitoring (BSM)........ 4-121 Canceling operation of Blind Spot
Monitoring (BSM).....................4-125
Blind Spot Monitoring (BSM) Warning
Beep...................................................7-50
Bluetooth® Bluetooth® Audio....................... 5-55
Bluetooth® Hands-Free...............5-65
Bluetooth® Preparat ion............... 5-52
Body Lubrication.............................. 6-27
Bottle Holder............ ....................... 5-103
Brakes Brake assist.................................. 4-92
Electric parking brake (EPB)...... 4-90
Foot brake....................................4-89
10-2
CX-9_8HT8-EA-19I_Edition2_old 2019-9-24 13:14:55