2020 LEXUS NX300h parking brake

4087-2. Steps to take in an emergency
LEXUS NX300h Owners Manual_USA_M78530_en
One of the following may be the cause
of the problem:
The 12-volt battery may be dis-
charged. ( P.412)
 The 12-volt battery terminal con-
nections may be loose or corroded.
( P.352)
One of the following may be the cause
of the problem:
 The 12-volt battery may be dis-
charged. ( P.412)
 One or both of the 12-volt battery
terminals may be disconnected.
( P.352)
Contact your Lexus dealer if the problem
cannot be repaired, or if repair procedures
are unknown.
When the hybrid system does not start,
the following steps can be used as an
interim measure to start the hybrid sys-
tem if the power switch is functioning
normally.
Do not use this starting procedure
except in cases of emergency. 1
Set the parking brake.
2 Shift the shift lever to P.
3 Turn the power switch to ACCES-
SORY mode.
4 Press and hold the power switch for
about 15 seconds while depressing
the brake pedal firmly.
Even if the hybrid system can be
started using the above steps, the sys-
tem may be malfunctioning. Have the
vehicle inspected by your Lexus dealer.
The interior lights and head-
lights are dim, or the horn does
not sound or sounds at a low vol-
ume.
The interior lights and head-
lights do not turn on, or the horn
does not sound.
Starting the hybrid system in an
emergency

4117-2. Steps to take in an emergency
LEXUS NX300h Owners Manual_USA_M78530_en
7
When trouble arises
■Locking the door
1 Move the inside lock button to the
lock position.
2 Close the door.
1 Ensure that the shift lever is in P and
depress the brake pedal.
2 Touch the Lexus emblem side of the
electronic key to the power switch.
When the electronic key is detected, a
buzzer sounds and the power switch will
turn to ON mode.
When the smart access system with push-
button start is deactivated in customization
setting, the power switch will turn to ACCESSORY mode.
3
Firmly depress the brake pedal and
check that message shown on the
multi-information display.
4 Press the power switch.
In the event that the hybrid system still can-
not be operated, contact your Lexus
dealer.
■Stopping the hybrid system
Set the parking brake, shift the shift lever to
P and press the power switch as you nor-
mally do when stopping the hybrid system.
■Electronic key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted.
■Alarm
Using the mechanical ke y to lock the doors
will not set the alarm system. If a door is
unlocked using the me chanical key when
the alarm system is set, the alarm may be
triggered.
WARNING
■When using the mechanical key and
operating the power windows or
moon roof
Operate the power window or moon
roof after checking to make sure that
there is no possibilit y of any passenger
having any of their body parts caught in
the window or moon roof.
Also, do not allow ch ildren to operate the
mechanical key. It is possible for children
and other passengers to get caught in
the power window or moon roof.
Starting the hybrid system

4197-2. Steps to take in an emergency
LEXUS NX300h Owners Manual_USA_M78530_en
7
When trouble arises
1 Stop the hybrid system. Shift the
shift lever to P and set the parking
brake.
2 Remove the mud, snow or sand
from around the front wheels.
3 Place wood, stones or some other
material under the front wheels to
help provide traction.
4 Restart the hybrid system.
5 Shift the shift lever to D or R,
release the parking brake. Then,
while exercising caution, depress
the accelerator pedal.
■When it is difficult to free the vehicle
Press to turn off TRAC. ( P.271)
WARNING
●After the hybrid system has been
turned off, check that the “READY”
indicator is off. When the hybrid sys-
tem is operating, the gasoline engine
may automatically start, or the cooling
fan may suddenly operate even if the
gasoline engine stops. Do not touch or
approach rotating parts such as the
fan, which may lead to fingers or cloth-
ing (especially a tie, a scarf or a muf-
fler) getting caught, resulting in serious
injury.
●Do not loosen the coolant reservoir
cap while the hybrid system and radia-
tor are hot.
High temperature steam or coolant
could spray out.
NOTICE
■When adding engine/power control
unit coolant
Add coolant slowly after the hybrid sys-
tem has cooled down sufficiently. Adding
cool coolant to a hot hybrid system too
quickly can cause damage to the hybrid
system.
■To prevent damage to the cooling sys-
tem
Observe the following precautions:
●Avoid contaminating the coolant with
foreign matter (such as sand or dust
etc.).
●Do not use any coolant additive.
If the vehicle becomes stuck
Carry out the following proce-
dures if the tires spin or the vehicle
becomes stuck in mud, dirt or snow:
Recovering procedure

4418-2. Customization
LEXUS NX300h Owners Manual_USA_M78530_en
8
Vehicle specifications
8-2.Customization
When customizing vehicle features,
ensure that the vehicle is parked in a
safe place with the shift lever in P and
the parking brake set.
■Changing using the Remote Touch
1 Press the “MENU” button on the
Remote Touch.
2 Select on the menu screen and
select “Vehicle”.
3 Select “Vehicle Customization”.
Various setting can be changed. Refer
to the list of settings that can be
changed for details.
■Changing using the multi-informa-
tion display
1 Press or of the meter con-
trol switches and select .
2 Press or of the meter con-
trol switches, select the item, and
then press .
3 Press or of the meter con-
trol switches, select the desired set-
ting, and then press .
To go back to the previous screen or
exit the customize mode, press .
Some function settings are changed simultaneously with other functions being cus-
tomized. Contact your Lexus dealer. Settings that can be changed using the Remote Touch
Settings that can be changed us ing the multi-information displayCustomizable features
Your vehicle includes a variety of
electronic features that can be per-
sonalized to suit your preferences.
The settings of these features can
be changed using the multi-infor-
mation display, the Remote Touch,
or at your Lexus dealer.
Customizing vehicle features
WARNING
■Cautions during customization
As the hybrid system needs to be operat-
ing during customizatio n, ensure that the
vehicle is parked in a place with ade-
quate ventilation. In a closed area such as
a garage, exhaust gases including harm-
ful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to
death or a serious health hazard.
NOTICE
■During customization
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while customizing features.
Customizable features
A
B

4488-2. Customization
LEXUS NX300h Owners Manual_USA_M78530_en
■Parking Support Brake function (for static objects)* ( P.252)
*:If equipped
■Driving position memory* ( P.138)
*:If equipped
■Outside rear view mirrors ( P.146)
■LTA (Lane Tracing Assist)* ( P.217)
FunctionDefault settingCustomized set-
ting
Parking Support Brake func-
tion (for static objects)OnOff—O——
FunctionDefault settingCustomized set-ting
Driver’s seat movement when
exiting the vehicleStandardOffO—O—Partial
Selection the door linking
driving position memory with
door unlock operation
Driver’s doorAll doors——O—
FunctionDefault settingCustomized set-ting
Automatic mirror folding and
extending operationLinked to the
locking/unlock- ing of the doorsOff
——O—Linked to opera-
tion of the power switch
Linked mirror function when
reversingOnOff——O—
FunctionDefault settingCustomized set- ting
Lane centering functionOnOff—O——
Steering assist functionOnOff—O——
Alert typesSteering wheel vibrationBuzzer—O——
Alert sensitivityHighStandard—O——
ABCD
ABCD
ABCD
ABCD

4528-3. Initialization
LEXUS NX300h Owners Manual_USA_M78530_en
8-3.Initialization
*:If equipped
Items to initialize
The following items must be initialized for normal system operation after such
cases as the 12-volt battery being reconnected, or maintenance being per-
formed on the vehicle.
List of the items to initialize
ItemWhen to initializeReference
Parking Support Brake function (for
static objects)
*After reconnecting or changing the
12-volt batteryP.258
Message indicating maintenance is
required (Except for Canada)After the maintenance is performedP.337
Tire pressure warning system
• When rotating the tires on vehi- cles with differing front and rear
tire inflation pressures
• When changing the tire inflation pressure by changing traveling
speed or load weight, etc.
•When changing the tire size
P.361
Oil maintenanceAfter the maintenance is performedP.348
Lexus parking assist monitor*
• After reconnecting or changing the 12-volt battery
• After changing a fuse
Refer to the
“NAVIGA-
TION AND MULTIME- DIA SYS- TEM
OWNER’S
MANUAL”.
Panoramic view monitor*
Power back door*P.121
Power window
When functioning abnormally
P.148
Moon roof*P.151

LEXUS NX300h Owners Manual_USA_M78530_en
467What to do if... (Troubleshooting)
Is the power switch in ON mode?
If you cannot release the shift lever
by depressing the brake pedal with
the power switch in ON mode
( P.180)
 It is locked automatically to prevent
theft of the vehicle. ( P.175)
 Is the window lock switch pressed?
The power window except for the
one at the driver’s seat cannot be
operated if the window lock switch
is pressed. ( P.149)
 The auto power off function will be
operated if the vehicle is left in
ACCESSORY or ON mode (the
hybrid system is not operating) for a
period of time. ( P.176)
 The seat belt reminder light is flash-
ing
Are the driver and the passengers wearing the seat belts? (
P.391)
 The parking brake indicator is on
Is the parking brake released?
( P.183)
Depending on the situation, other
types of warning buzzer may also
sound. ( P.386, 396)
 Did anyone inside the vehicle open
a door during setting the alarm?
The sensor detects it and the alarm
sounds. ( P.77)
To stop the alarm, turn the power
switch to ON mode or start the hybrid
system.
 Is the message displayed on the
multi-information display?
Check the message on the multi-
information display. ( P.396)
 When a warning light turns on or a
warning message is displayed, refer
to P.386, 396.
The shift lever cannot be shifted
from P even if you depress the
brake pedal
The steering wheel cannot be
turned after the hybrid system is
stopped
The windows do not open or
close by operating the power
window switches
The power switch is turned off
automatically
A warning buzzer sounds during
driving
An alarm is activated and the
horn sounds
A warning buzzer sounds when
leaving the vehicle
A warning light turns on or a
warning message is displayed

470Alphabetical Index
LEXUS NX300h Owners Manual_USA_M78530_en
B
Back door .......................................................... 114 Wireless remote control............................117
Back-up lights Replacing light bulb.................................. 374
Battery (12-volt battery) If the 12-volt battery is discharged ...... 412
Preparing and checking before winter ..........................................................................277
Replacing ......................................................... 414
Warning light ...............................................386
Battery (traction battery) ............................ 70
Blind Spot Monitor (BSM)......................... 261 Blind Spot Monitor function................. 263
Rear Cross Traffic Alert function....... 265
Bottle holders................................................ 304
Brake Brake Hold .................................................... 186
Fluid .................................................................. 427
Parking brake ............................................... 183
Regenerative braking ................................. 68
Warning light ............................................... 387
Brake assist .................................................... 270
Brake Hold ...................................................... 186
Break-in tips..................................................... 157
Brightness control Instrument panel light control ................88
BSM (Blind Spot Monitor)......................... 261 Blind Spot Monitor function................. 263
Rear Cross Traffic Alert function....... 265
BSM (Blind Spot Monitor) main switch261
C
Card key .......................................................... 106
Care Aluminum wheels ..................................... 330
Exterior............................................................333
Interior .............................................................333
Seat belts ........................................................333
Cargo capacity........................... 161, 164, 422
Cargo hooks ................................................. 306
Cargo net hooks .......................................... 306
Chains .............................................................. 278
Child restraint system....................................47 Booster seats installation .......................... 53
Convertible seats installation .................. 52
Front passenger occupa nt classification
system................................................................ 41
Infant seats installation ..................................51
Installing CRS with LATCH anchors .55
Installing CRS with seat belts ....................51
Installing CRS with top tether strap..... 57
LATCH anchors ...........................................55
Child safety ........................................................47 12-volt battery precautions ........ 353, 415
Airbag precautions ...................................... 37
Back door precautions .............................. 114
Child restraint system ................................. 47
How your child should wear the seat belt............................................................................. 28
Installing child restraints............................. 47
Moon roof precautions............................ 152