2020 Lexus GX460 brake

5
GX460_QG_OM60R32U_(U)
OverviewInstrument Panel
See P. 7
Inside lock buttons
P. 92
Door lock switches P. 92
Power window switches
P. 93
Window lock switch P. 93
Driving position memory buttons
*
Hood lock release lever*
See P. 8
Parking brake pedal
*
Center differential lock/unlock switch P. 30
Fog light switch*
Windshield wipers
and washer switch
Rear window wiper
and washer switch
P. 37
P. 39
Engine (ignition) switch P. 16
Headlight switch P. 34
Turn signal lever P. 21
Second start mode switch*

16
GX460_QG_OM60R32U_(U)
Engine (Ignition) Switch
■Starting the engine
Check that the par king brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
and a message will be dis-
played on the multi-information dis-
play.
If it is not displayed, the engine can-
not be started.
Press the engine switch shortly and
firmly. When operating the engine switch,
one short, firm press is enough.
It is not necessary to press and hold
the switch.
The engine will crank until it starts or
for up to 30 seconds, whichever is
less.
Continue depressing the brake pedal
until the engine is completely started.
The engine can be started from any
engine switch mode.
■ Stopping the engine
Stop the vehicle.
Set the parking brake, and shift the shift lever to P.
Press the engine switch.
Release the brake pedal an d check that “ACCESSORY” or “IGNITION ON” is not
shown on the meter.
Performing the following oper ations when carrying the electronic key on your person
starts the engine or changes engine switch modes.
1
2
3
4
1
2
3
4

17
GX460_QG_OM60R32U_(U)
■Changing engine switch modes
Modes can be changed by pressing the engine switch with brake pedal released. (The mode
changes each time the switch is pressed.)
Off
*
The emergency flashers can be used.
ACCESSORY mode
Some electrical components such as
the audio system can be used.
“ACCESSORY” will be displayed on
the multi-information display.
IGNITION ON mode
All electrical components can be used.
“IGNITION ON” will be displayed on
the multi-information display.
*: If the shift lever is in a position other than
P when turning off the engine, the
engine switch will be turned to ACCES-
SORY mode, not to off.
1
2
3

24
GX460_QG_OM60R32U_(U)
■Changing the vehicle-to-vehicle distan ce (vehicle-to-vehicle distance con-
trol mode)
Pressing the switch changes the vehicle-to-
vehicle distance as follows:
Long
Medium
ShortThe vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you,
the preceding vehicle mark will also
be displayed.
■ Canceling and resuming the speed control
Pulling the lever toward you cancels
the speed control.
The speed control is also canceled
when the brake pedal is depressed.
Pushing the lever up resumes the
cruise control and returns vehicle
speed to the set speed. However, cruise control does not
resume when the vehicle speed is
approximately 25 mph (40 km/h) or
less.
Preceding
vehicle mark
1
2
3
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.
1
2

31
GX460_QG_OM60R32U_(U)
Crawl Control (if equipped)
Crawl Control ON/OFF switch
The indicator light on the switch comes
on when operating.
Crawl Control speed selector switch
Crawl Control indicators
The Crawl Control indicator is lit and
the slip indicator flashes when operat-
ing.
Multi-information display
The selected multi-terrain select mode
will be displayed on the multi-informa-
tion display.
Allows travel on extremely ro ugh off-road surfaces at a fixed low speed without pressing
the accelerator or brake pedal. Minimizes loss of traction or vehicle slip when driving on
slippery road surfaces, hel ping for stable driving.
1
2
3
4

What to do if ...
97
GX460_QG_OM60R32U_(U)
List of Warning/Indicator Lights
Immediately stop the vehicle in a safe place and contact your Lexus dealer.
Continuing to drive the vehicle may be dangerous.
(U.S.A.)
(Canada)
Brake system warning light
Immediately stop the vehicle in a safe place and contact your Lexus dealer.
Charging system warning light
Low engine oil pressure warning light*1
Have the vehicle inspected by your Lexus dealer immediately.
(U.S.A.)
(Canada)Malfunction
indicator lamp
Kinetic dynamic suspension
system warning light
(Flashes)
Low speed four-wheel
drive indicator light
SRS warning light
(Flashes)
Center differential lock
indicator light
(U.S.A.)
(Canada)
ABS warning light(Blinking and then continuously on)Tire pressure warning light
(Flashes)
(Flashes)
(U.S.A.)
(Canada)
Parking brake
indicator
(Flashes or
illuminates)PCS warning light
Slip indicator light
For further information, re fer to the OWNER’S MANUAL.

98
What to do if ...
GX460_QG_OM60R32U_(U)
Follow the correction procedures.
Open door warning lightLDA indicator*1
Low fuel level warning light
Brake Override System
warning light /Drive-Start
Control warning light
*1
Seat belt reminder light
(Illuminates without
blinking)Tire pressure warning light*3
Stop and check.
High coolant temperature warning light*1
For further information, re fer to the OWNER’S MANUAL.

102
What to do if ...
GX460_QG_OM60R32U_(U)
■Starting the engine
Ensure that the shift lever is in P and
depress the brake pedal.
Touch the Lexus emblem side of the
electronic key to the engine switch.
When the electronic key is detected,
a buzzer sounds and the engine
switch will turn to IGNITION ON
mode.
When the smart access system with
push-button start is deactivated in
customization sett ing, the engine
switch will turn to ACCESSORY
mode.
Firmly depress the brake pedal and
check that is shown on the
multi-information display.
Press the engine switch shortly and
firmly.
In the event that the engine still cannot be started, contact your Lexus dealer.1
2
3
4
If the electronic key battery becomes depleted, replace it with a new battery. For instruc-
tions on replacing the battery, refer to th e “OWNER’S MANUAL”. If you need further
assistance, contact your Lexus dealer.