2020 KIA OPTIMA glove box

[x] Cancel search: glove box

Page 219 of 591

KIA OPTIMA 2020  Features and Functions Guide 4129
Features of your vehicle
Climate control air filter
The climate control air filter installed
behind the glove box filters the dust
or other pollutants that come into the
vehicle from the outside

Page 231 of 591

KIA OPTIMA 2020  Features and Functions Guide 4141
Features of your vehicle
Climate control air filter
The climate control air filter installed
behind the glove box filters the dust or
other pollutants that come into the
vehicle from the outside

Page 238 of 591

KIA OPTIMA 2020  Features and Functions Guide Features of your vehicle
148
4
STORAGE COMPARTMENTS 
These compartments can be used to
store small items required by the
driver or passengers.
 To avoid possible theft, do not
leave valuables in the s

Page 239 of 591

KIA OPTIMA 2020  Features and Functions Guide 4149
Features of your vehicle
✽ ✽   
NOTICE
If the temperature control knob is in
the warm or hot position, warm or
hot air will flow into the glove box.
Sunglass holder
To open the sunglass holde

Page 456 of 591

KIA OPTIMA 2020  Features and Functions Guide • Stop and tail lamp (LED type) bulb replacement . . 7-87
• Back-up lamp bulb replacement . . . . . . . . . . . . . . . . 7-87
• Tail lamp bulb replacement . . . . . . . . . . . . . . . . . . .

Page 489 of 591

KIA OPTIMA 2020  Features and Functions Guide Maintenance
36
7
CLIMATE CONTROL AIR FILTER
Filter inspection
The climate control air filter should
be replaced according to the
Maintenance Schedule. If the vehicle
is operated in severely air-pollut

Page 520 of 591

KIA OPTIMA 2020  Features and Functions Guide 767
Maintenance
Fuse NameFuse ratingCircuit Protected
MODULE 710AAround View Unit, Front Air Ventilation Seat Control Module, Front Seat Warmer Control Module, Rear Seat
Warmer Control Module
MODULE 5

Page 545 of 591

KIA OPTIMA 2020  Features and Functions Guide Maintenance
92
7
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens c
Page:   < prev 1-8 9-16 17-24 next >