2020 KIA CADENZA light

9-8
Defog/Defrost Options (if equipped)
You can set to enable the defogger to secure driver visibility.
000eAuto Defog: When the sensor detects fog on the windshield,
the automatic ventilation is run for defogging.
Climate Features (if equipped)
You can set or change the settings for the climate system.
000eRear Climate Controls: Used to move to the climate control
screen for the rear seat. You can check or set the climate
status for the rear seat.
 A
For more information about controlling the rear-seat
climate control system:
> see “Using the rear-seat climate
control system (if equipped)”
Lights (if equipped)
You can confi gure the settings for vehicle lights.
Climate (if equipped)
You can confi gure the operation environment for climate control
system.
Recirculate Air (if equipped)
You can set to keep the inside air pleasant by blocking infl ow of
outside air.
000eActivate upon Washer Fluid Use: Sets to automatically
switch to the inside air circulation mode to prevent infl ow of
washer fl uid scent when spraying washer fl uid.
Automatic Ventilation (if equipped)
You can set to prevent condensation inside and keep inside air
pleasant using this feature.
000eAuto Dehumidify: Once the inside air circulation mode has
been used for a long time, it is switched to the outside air
infl ow mode to prevent condensation.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e0019>


ß
1



ß
1


9-9
Door (if equipped)
You can confi gure the operation environment for the trunk and
doors.
Auto Lock (if equipped)
You can set the time to automatically lock all doors.
Auto Unlock (if equipped)
You can set the time to automatically unlock all doors.
Ambient Light (if equipped)
You can set the brightness and color of the ambient light.
000eBrightness: Can set the brightness of the ambient light.
000eColor: Can change the color of the ambient light. You can
select or directly enter the desired color.
One Touch Turn Signal (if equipped)
You can set the number of turn signal lamp fl ashes when the
lamp lever is operated.
Headlight Delay (if equipped)
You can set to turn off the taillights and headlights in 15 seconds
after turning off the vehicle to ensure visibility.
High Beam Assist (if equipped)
You can set to automatically control the high beam when an
oncoming vehicle is approaching to decrease the high beam
glare.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e001a>


ß
1



ß
1


9-11
Content Selection (if equipped)
You can set the content to display on the instrument cluster.
000eGear Position Pop-up: When the gear is shifted, the
information pop-up appears.
000eWiper/Lights Display: When the wiper or light lever operates,
the operation mode appears.
000eTraffi c Signs: Displays the road information such as speed
bumps and speed limits.
000eIcy Road Warning: When the outside temperature drops
below 4 °C (39 °F), the possibility of road icing appears.
Cluster Voice Guidance Volume (if equipped)
You can adjust the volume of guiding beep.
Welcome Sound (if equipped)
You can set to generate the notifi cation sound when turning on
or off the instrument cluster.
Convenience (if equipped)
You can confi gure the features for convenience such as welcome
sound and wireless charging.
Welcome Mirror/Light (if equipped)
You can set the welcoming time on the outside rear-view mirrors.
000eEnable on Driver Approach: When the driver with the smart
key approaches, the welcome feature is enabled.
Wireless Charging System (if equipped)
You can set to charge your smartphone wirelessly.
 A
This feature is available only in smartphones that can be
charged wirelessly.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00120012>


ß
1



ß
1


9-32
Language
You can set the system display language.
 A
Once the language has been changed, it takes a while to
apply the new language to the system. The notifi cation pop-
up window appears as soon as the new language is applied to
the system. When you wait a while or touch anywhere outside
the pop-up window, the window automatically disappears.
 A
When you change the system language, it does not aff ect the
display of other unique data such as MP3 music fi le name.
 A
Depending on the system language, the Bluetooth phone
message view and voice recognition may not be supported.
GPS Time
After receiving the time from GPS, it sets the system date and
time automatically.
 A
To manually set the date and time, uncheck GPS Time, touch
the current date and time below GPS Time, and then set the
date and time.
24 Hours
The system time is displayed in the 24-hour format.
 A
For example, when 24 Hours is checked and the current time
is 01:08 pm, the system screen displays the time as “13:08.”
When the checkbox is deselected, the time display changes to
“01:08 PM.”
Daylight Saving Time
Displays the system time in the format of Daylight Saving Time.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140013>


ß
1



ß
1


9-36
Storage
You can check the storage space of the system memory where
voice memos can be saved.
User's Manual on Web (QR Code)
You can access the online user’s manual of the system by
scanning the QR code with your smartphone.
Reset
You can initialize all system settings including general settings
and navigation settings.
ÜÜCaution
000eWhen initialization is performed, all user data in the system
including the location data is deleted.
000eWhen phone projection is active, you cannot reset the system
settings. To reset the settings, remove the USB cable from
your system.
Confi guring the display
settings
You can change the system display settings such as display
brightness.
1 On the All Menus screen, touch Setup >
Display.
The display settings screen appears.
2 Confi gure the settings required:
Mode
You can set the system to automatically adjust the display
brightness depending on the ambient light intensity. You can also
set the system to keep the display bright or dark all the time.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140017>


ß
1



ß
1


9-37
Automatic
The display brightness is automatically adjusted based on the
surrounding environment.
Daylight
It can be activated when Automatic is turned off . It keeps the
display always bright regardless of the surrounding environment.
Night
It can be activated when Automatic is turned off . It keeps the
display always dark regardless of the surrounding environment.
Illumination
You can set the system to automatically adjust the display
brightness depending on the cluster illumination. You can also
set the level of display brightness to use while using the daytime
or night mode.
Link to Cluster Illumination Control
The display brightness is automatically adjusted based on the
cluster illumination.
Daylight
You can set the display brightness when Daylight is selected
under Mode. Uncheck Link to Cluster Illumination Control and
then set to the desired brightness.
Night
You can set the display brightness when Night is selected under
Mode. Uncheck Link to Cluster Illumination Control and then
set to the desired brightness.
Blue Light Filter
Enable blue light fi ltering to adjust the screen light to reduce the
level of eye strain.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140018>


ß
1



ß
1


9-38
Confi guring the media settings
Set to receive a notifi cation when the information changes during
playback or to include sub-folders when playing a folder on
repeat.
1 On the All Menus screen, touch Setup >
Media.
The media settings screen appears.
2 Confi gure the settings required:
Media Change Notifi cations
You can set to briefl y display media information at the top of
screen while playing the next item when you move from the
media player screen to another.
Use Blue Light Filter
Enable or disable blue light fi ltering.
Blue Light Filter Settings
Set to activate blue light fi ltering automatically based on the
ambient light or pick the time range manually.
000eAutomatic: Enable blue light fi ltering based on the ambient
light.
000eScheduled Time: Enable blue light fi ltering during the set
time range.
Reset
You can initialize all display settings such as brightness.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140019>


ß
1



ß
1