Page 250 of 330

TECHNICAL SPECIFICATIONS
248
Tighten  the  lug  nuts/bolts  in  a  star  pattern
until each nut/bolt has been tightened twice.
Ensure  that  the  socket  is  fully  engaged  on
the lug nut/bolt (do not insert it halfway).Torque Patterns
After  25 miles  (40 km),  check  the  lug  nut/
bolt  torque  to  be  sure  that  all  the  lug  nuts/
bolts are properly seated against the wheel.WHEELS
Refer to the tire placard label located on the
door sill of the vehicle or to the Registration
Document  for  the  tire  size  and  pressure.
Refer  to  “Tires”  in  “Servicing  And  Mainte -
nance” chapter for further information.
WEIGHTS
For  further  information  refer  to  “Vehicle
Loading”  in  the  “Starting  And  Operating”
chapter.
FUEL REQUIREMENTS — 
GASOLINE ENGINE   
2.0L Engine
This engine is designed to meet all emission
regulations,  and  provide  satisfactory  fuel
economy  and  performance  when  using
high-quality unleaded gasoline with a recom -
mended RON of 95.
While  operating  on  gasoline  with  the
required  octane  number,  hearing  a  light
knocking  sound  from  the  engine  is  not  a
cause for concern. However, if the engine is
heard  making  a  heavy  knocking  sound,  see
your  dealer  immediately.  Use  of  gasoline
with  a  lower  than  recommended  octane
number  can  cause  engine  failure  and  may
void  or  not  be  covered  by  the  New  Vehicle
Limited Warranty.
Poor  quality  gasoline  can  cause  problems
such  as  hard  starting,  stalling,  and  hesita -
tions. If you experience these symptoms, try
another brand of gasoline before considering
service for the vehicle.
 WARNING!
To  avoid  the  risk  of  forcing  the  vehicle  off
the  jack,  do  not  tighten  the  lug  nuts/bolts
fully  until  the  vehicle  has  been  lowered.
Failure to follow this warning may result in
personal injury.
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 248   
         
        
        
     
        
        Page 252 of 330
TECHNICAL SPECIFICATIONS
250Fuel Icons
What It Means
Unleaded fuel containing up to 2,7% (m/m) oxygen and a maximum ethanol content of 5,0% (V/V)  EN228 compliant
fuel
Unleaded  fuel  containing  up  to  3,7%  (m/m)  oxygen  and  a  maximum  ethanol  content  of  10,0%  (V/V)  EN228
compliant fuel
Compressed Natural Gas and biomethane for automotive applications  EN16723 compliant fuel
Liquefied Petroleum Gas for automotive applications  EN589 compliant fuel
Diesel fuel containing up to 7% (V/V) Fatty Acid Methyl Esters (FAME)  EN590 compliant fuel
Diesel fuel containing up to 10% (V/V) Fatty Acid Methyl Esters (FAME)  EN16734 compliant fuel
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 250   
         
        
        
     
        
        Page 254 of 330
TECHNICAL SPECIFICATIONS
252Fuel Icons
What It Means
Unleaded fuel containing up to 2,7% (m/m) oxygen and a maximum ethanol content of 5,0% (V/V)  EN228 compliant
fuel
Unleaded  fuel  containing  up  to  3,7%  (m/m)  oxygen  and  a  maximum  ethanol  content  of  10,0%  (V/V)  EN228
compliant fuel
Compressed Natural Gas and biomethane for automotive applications  EN16723 compliant fuel
Liquefied Petroleum Gas for automotive applications  EN589 compliant fuel
Diesel fuel containing up to 7% (V/V) Fatty Acid Methyl Esters (FAME)  EN590 compliant fuel
Diesel fuel containing up to 10% (V/V) Fatty Acid Methyl Esters (FAME)  EN16734 compliant fuel
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 252   
         
        
        
     
        
        Page 256 of 330

TECHNICAL SPECIFICATIONS
254
FLUIDS AND LUBRICANTS
Engine    
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the Scheduled
Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications. Lubricant quality is
crucial for engine operation and duration. If lubricants conforming to the specific request are not available, products that meet the indicated
specifications can be used to top up, in this case optimal performance of the engine is not guaranteed.
ComponentFluid, Lubricant, or Genuine Part
Eng
ine Coolant We  recommend  you  use  PARAFLU UP  Formula  OAT  (Organic  Additive
Technology)  or  equivalent  meeting  the  requirements  of  FCA  Material
Standard MS.90032.
Intercooler – If Equipped We  recommend  you  use  PARAFLU 
UP  Formula  OAT  (Organic  Additive
Technology)  or  equivalent  meeting  the  requirements  of  FCA  Material
Standard MS.90032.
Engine Oil — 2.0L Gasoline Engine We  recommend  you  use  SELENIA  K  POWER  PLUS,  or  equivalent,  API  SN
PLUS  Certified  SAE  5W-30  Full  Synthetic  Engine  Oil,  meeting  the
requirements  of  FCA  Material  Standard  MS-13340.  If  SN  PLUS  or
equivalent  oil  is  unavailable  then  use  SELENIA  DIGITEK  PE,  or  equivalent,
SAE  0W-30  ACEA  C2/API  SN  Full  Synthetic  Engine  Oil,  meeting  the
requirement of FCA Material Standard 9.55535-GS1.
CAUTION!
Failure  to  use  the  recommended  SN  PLUS  or  equivalent  oil  can  cause  engine
damage not covered by the vehicle warranty.
Engine Oil — 3.6L Gasoline Engine We  recommend  you  use  SELENIA  K  POWER  0W-20,  or  equivalent,  0W-20
Engine  Oil,  meeting  the  requirements  of  FCA  Material  Standard  MS-6395.
Refer to your engine oil filler cap for correct SAE grade.
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 254   
         
        
        
     
        
        Page 258 of 330

TECHNICAL SPECIFICATIONS
256
(Continued)
(Continued)
 CAUTION!
Mixing  of  engine  coolant  (antifreeze)
other  than  specified  Organic  Additive
Technology  (OAT)  engine  coolant  (anti -
freeze),  may  result  in  engine  damage
and  may  decrease  corrosion  protection.
Organic  Additive  Technology  (OAT)
engine  coolant  is  different  and  should
not be mixed with Hybrid Organic  Addi -
tive  Technology  (HOAT)  engine  coolant
(antifreeze) or any “globally compatible”
coolant (antifreeze). If a non-OAT engine
coolant  (antifreeze)  is  introduced  into
the cooling system in an emergency, the
cooling  system  will  need  to  be  drained,
flushed,  and  refilled  with  fresh  OAT
coolant  (conforming  to  MS.90032),  by
an authorized dealer as soon as possible.Do not use water alone or alcohol-based
engine coolant (antifreeze) products. Do
not use additional rust inhibitors or anti -
rust  products,  as  they  may  not  be
compatible  with  the  radiator  engine
coolant and may plug the radiator.
This  vehicle  has  not  been  designed  for
use  with  propylene  glycol-based  engine
coolant  (antifreeze).  Use  of  propylene
glycol-based  engine  coolant  (antifreeze)
is not recommended.
The use of products with different spec-
ifications  than  those  indicated  above
could cause damage to the engine that is
not covered by the warranty.
 CAUTION! (Continued)
Use AdBlue® only according to DIN 70 070
and  ISO  22241-1.  Other  fluids  may  cause
damage  to  the  system:  also  exhaust  emis -
sions would no longer comply with the law.
The distribution companies are responsible
for  the  compliance  of  their  product.
Observe  the  precautions  of  storage  and
servicing,  in  order  to  preserve  the  initial
qualities.  The  manufacturer  of the  vehicle
does  not  recognize  any  guarantee  in  case
of malfunctions and damage caused to the
vehicle  due  to  the  use  of  AdBlue®  not  in
accordance with regulations.
 CAUTION! (Continued)
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 256   
         
        
        
     
        
        Page 260 of 330

TECHNICAL SPECIFICATIONS
258
FUEL CONSUMPTION AND 
CO
2 EMISSIONS 
The  fuel  consumption  and  CO2  emission
figures declared by the manufacturer are deter -
mined  on  the  basis  of  the  type-approval  tests
laid  down  by  the  applicable  standards  in  the
country where the vehicle is registered.
The type of route, traffic conditions, weather
conditions, driving style, general condition of
the  vehicle,  trim  level/equipment/  accesso -
ries,  use  of  the  climate  control  system,
vehicle load, presence of roof racks and other
situations  that  adversely  affect  the  aerody -
namics  or  wind  resistance  lead  to  different
fuel  consumption  values  than  those
measured. The fuel consumption will only become more
regular  after  driving  the  first  1,864 miles
(3,000 km).
To  find  the  specific  fuel  consumption  and
CO
2 emission figures for this vehicle, please
refer to the data in the Certificate of Confor -
mity (if equipped), and the related documen -
tation  that  accompanies  the  vehicle  (if
equipped).
MOPAR ACCESSORIES 
Authentic Accessories And Jeep 
Performance Parts By Mopar
Mopar Accessories  and  Jeep  performance
parts  are  developed  with  the  same  engi -
neering  that  went  into  your  Wrangler.
Choose  these  products  with  confidence
knowing  that  they  have  passed  the  same
rigid standards for function, fit, durability
and performance as your Wrangler.
For the  full line of Authentic Jeep  Acces-
sories by Mopar, visit your local dealership
or online at  jeep.mopar.eu
NOTE:
All parts are subject to availability.
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 258