Page 133 of 330

131
Suitability of Passenger Seats for i-Size 
Child Restraint System Use
The  rear  outboard  seats  of  the  vehicle  are
type-approved  to  house  the  state-of-the-art
i-Size child restraint systems.
These  child  restraint  systems,  built  and
type-approved  according  to  the  i-Size  (ECE
R129) standard, ensure better safety condi-
tions to carry children on board a vehicle:
The  child  must  be  transported  rearward
facing until 15 months:
Child  restraint  system  protection  is
increased in the event of a side collision:
The use of the ISOFIX system is promoted
to  avoid  faulty  installation  of  the  child
restraint system:
Efficiency  in  the  choice  of  the  child
restraint  system,  which  isn't  made
according  to  weight  anymore  but
according  to  the  child's  height,  is
increased:
Compatibility  between  the  vehicle  seats
and  the  child  restraint  systems  is  better:
the  i-Size  child  restraint  systems  can  be
considered as "Super ISOFIX"; this means
that  they  can  be  perfectly  fitted  in
type-approved i-Size seats, but can also be
fitted in ISOFIX (ECE R44) type-approved
seats.
NOTE:
The  vehicle  seats,  i-Size  type-approved,  are
marked by the symbol shown in Figure XX. The  following  table,  according  to  European
standard  ECE  129,  indicates  the  possibility
of i-Size child restraint system installation.
Key of letters used in the table above:
i-U  =  Suitable  for  Universal  i-Size  child
restraint  systems,  both  rearward  facing
and forward facing.
X  =  Seat  not  suitable  for  Universal  i-Size
child restraint systems.
i-Size Child Seat Position Table
DeviceFront 
Passen -
gerRear 
Out -
board Rear 
Center
i-Size  Child 
Restraint  Systems ISO/
R2 X i-U X
ISO/ F2 X i-U X
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 131   
         
        
        
     
        
        Page 134 of 330
SAFETY
132
Child Restraint Systems Recommended By FCA For Your Vehicle
Lineaccessori includes a complete range of child restraint systems to be fixed using the seat belt with three anchorage points or the ISOFIX
anchorages.
Weight GroupChild Restraint System Type Of Child Restraint 
System Child restraint System 
Installation
Group  0+  :  from  birth  to  13  kg
from 40 cm to 80 cm
  Peg Pérego Primo 
Viaggio SL Universal/ISOFIX  child
restraint  system.  It  must
be  installed  facing
rearwards,  using  the
vehicle  seat  belts  only,
or  the  dedicated  ISOFIX
base  (which  can  be
purchased  separately)
and  the  vehicle  ISOFIX
anchorages.  It  must  be
fitted  on  the  rear  outer
seats.
Peg Pérego ISOFIX 0+1 
K Base
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 132   
         
        
        
     
        
        Page 135 of 330
133
Group 1: from 9 up to 18 kg from
67 cm to 105 cmBritax Roemer Duo Plus It  must  be  fitted  facing
forwards  only,  using  the
ISOFIX  attachments  and
the  upper  strap,
provided  with  the  child
restraint  system.  It  must
be  fitted  on  the  rear
outer seats.
Group  2:  from  15  to  25  kg  from
95 cm to 135 cm Britax Roemer Kidfix XP It  can  only  be  fitted
facing  forwards,  using
the  three-point  seat  belt
and  the  ISOFIX
anchorages  of  the
vehicle,  if  present.  Jeep
recommends installing  it
using  the  vehicle’s
ISOFIX  anchor  points.  It
must  be  fitted  on  the
rear outer seats.
Weight Group Child Restraint System Type Of Child Restraint 
System Child restraint System 
Installation
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 133   
         
        
        
     
        
        Page 136 of 330
SAFETY
134
NOTE:
Jeep  recommends  fitting  the  child  restraint
system  according  to  the  instructions,  which
must be included.Transporting Pets 
Air  Bags  deploying  in  the  front  seat  could
harm  your  pet.  An  unrestrained  pet  will  be
thrown  about  and possibly  injured, or injure
a  passenger  during  panic  braking  or  in  a
collision.Pets should be restrained in the rear seat (if
equipped)  in  pet  harnesses  or  pet  carriers
that are secured by seat belts.
Group  3:  from  22  to  36  kg  from
136 cm to 150 cm
Britax Roemer Kidfix XP It  can  only  be  fitted
facing  forwards,  using
the  three-point  seat  belt
and  the  ISOFIX
anchorages  of  the
vehicle,  if  present.  Jeep
recommends installing  it
using  the  vehicle’s
ISOFIX  anchor  points.  It
must  be  fitted  on  the
rear outer seats.
Weight Group Child Restraint System Type Of Child Restraint 
System Child restraint System 
Installation
2020_JEEP_JL_WRANGLER_UG_RHD_UK.book  Page 134