
72020 NEW VEHICLE LIMITED WARRANTY
with local regulations or environmental 
requirements of any country (other than the 
U.S. or Canada) are NOT covered by this 
warranty.
DAMAGE OR FAILURES DUE TO 
ALTERATION OR MODIFICATION 
This warranty does not cover damage, failures 
or corrosion resulting from or caused by: 
•Alteration, tampering, or improper repair 
•Installation of non-Infiniti approved 
accessories or components 
•Improper installation of any Infiniti approved 
aftermarket accessory or component 
•A vehicle whose odometer mileage has been 
altered, or the odometer repaired or replaced 
and the actual vehicle mileage cannot be 
correctly and readily determined 
SALVAGE TITLE This limited warranty does not apply to any 
vehicle, and is rendered void if the vehicle is 
(or ever has been) issued a “salvage” or similar 
title including, but not limited to junk, scrap, 
rebuilt, or flood titles, under any state’s law; or 
has ever been determined to be a “total loss” 
or equivalent by any insurance company, such 
as by payment of a cash payment of a claim in 
lieu of repairs because of a determination that 
the cost of repairs exceeded the actual cash 
value of the vehicle.
DAMAGE, FAILURES OR CORROSION 
FROM ENVIRONMENTAL 
CONDITIONS 
This warranty does not cover damage, failures 
or corrosion resulting from or caused by: 
•Stone chipping, chemical fallout, tree sap, 
salt, hail, windstorm, lightning, flood or other 
environmental conditions.
•The items listed below are not covered 
under corrosion coverage (perforation from 
corrosion). 
•• Exhaust system components. 
•Corrosion other than perforation, such 
as cosmetic or surface corrosion due to 
defects in material or workmanship. This is 
covered under the Basic Coverage of the 
New Vehicle Limited Warranty.
DAMAGE, FAILURES OR CORROSION 
DUE TO LACK OF OR IMPROPER 
MAINTENANCE REPAIRS
This warranty does not cover damage, failures 
or corrosion resulting from or caused by: 
•Lack of performance of proper maintenance 
services as outlined in your Owner’s Manual. 
•Fuel, fluids, or lubricants that are 
contaminated or that do not meet the 
specification as outlined in your Owner’s 
Manual.
•Use of parts not equivalent in quality or 
design to parts supplied by Infiniti for use on 
Infiniti vehicles.
MAINTENANCE SERVICE EXPENSEThis warranty does not cover normal 
maintenance services as specified in both 
your Owner’s Manual and Infiniti Service 
& Maintenance Guide such as cleaning 
and polishing, wheel alignment, headlight 
aiming, replacement of filters, replacement of 
windshield wiper inserts, lubricants, coolant, 
worn brake shoes, pads, drums and rotors and 
worn clutch discs, for example. 
SEAT BELTS, TIRES AND EMISSION 
CONTROL SYSTEM 
Seat belts, tires and the emission control 
system are covered by separate warranties. 

39CONTINENTAL/GENERAL TIRE LIMITED WARRANTY
Serva-Spare Tires
After the “Free Replacement Policy” expires 
(set forth in section 2A), no adjustment will be 
made.
3.  HOW A PRO RATA PRICE IS 
CALCULATED 
The replacement tire price will be determined 
by multiplying the percentage of the usable 
tread worn by the Retailer’s Selling Price 
(excluding all applicable taxes) at the time of 
the adjustment or the Continental/General 
brand current published Adjustment Base 
Price, whichever is lower. The usable tread 
is the original tread down to the tread wear 
indicators (2/32nds of an inch of tread 
remaining). The Adjustment Base Price is 
intended to fairly represent a Retailer’s Selling 
Price for the same or comparable tire.
4.  WHAT IS NOT COVERED BY THE 
ADJUSTMENT POLICY
a. The following conditions are not covered:
Road Hazard: Cuts, snags, punctures, bruises 
or impact breaks and any damage caused by 
puncture or tire repair. Ride/Vibration: After 
“Free Replacement Policy” (set forth in section 
2A) expires. 
Tire Damage or Failure Resulting From 
Improper Operation or Maintenance: Load, 
speed, and inflation practices causing excessive 
operational temperatures to exceed the tire 
capabilities. Tire damage (including irregular treadwear) 
or failure resulting from: improper mounting 
or demounting, damaged rim, wheel 
alignment, tire trueing, chain damage, brakes 
or any similar mechanical problem, extreme 
temperature exposure, misuse, negligence, and 
abusive driving such as tire spinning, racing 
or accident damage. Tire failure resulting 
from intentional alterations: such as adding a 
white inlay on a blackwall or sealant materials. 
Age Conditions: Weather checking/cracking 
coverage is for a maximum period of 48 
months from the date of purchase.
b. General Exclusions -
Tire(s) submitted for an adjustment in service 
for longer than 72 months from date of 
purchase*, are not covered by this policy. 
Tire(s) on any vehicle registered and normally 
operated outside the United States and 
Canada are not covered under this Policy. For 
tires on vehicles normally operated outside 
the United States and Canada, see the 
nearest Continental or General Tire retailer or 
distributor for local coverage. 
Tire(s) transferred from the vehicle on which 
they were originally installed are not covered 
under this Policy. 
Company does not offer tread wearout 
coverage up to a predetermined mileage 
under this Policy. Tire(s) used in racing related 
activities or competitive events are not covered 
by this Policy.THIS LIMITED WARRANTY IS IN LIEU OF 
ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE. 
NO OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE, 
ARE MADE OR INTENDED BY COMPANY. 
COMPANY DISCLAIMS ALL IMPLIED 
WARRANTIES, INCLUDING WARRANTIES 
OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE. ANY 
IMPLIED WARRANTIES, INCLUDING, BUT 
NOT LIMITED TO, ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE, ARE LIMITED IN 
DURATION TO THE DURATION OF THIS 
WRITTEN WARRANTY. SOME STATES DO 
NOT ALLOW LIMITATIONS ON HOW LONG 
AN IMPLIED WARRANTY LASTS, SO THE 
ABOVE LIMITATION MAY NOT APPLY TO 
YOU. 
NO COMPANY EMPLOYEE OR RETAILER 
HAS THE AUTHORITY TO MAKE ANY 
WARRANTY, REPRESENTATION, PROMISE 
OR AGREEMENT ON BEHALF OF 
COMPANY EXCEPT AS STATED IN THIS 
LIMITED WARRANTY. 
(Continued on next page) 

43
Contact the manufacturer of your tires for 
their position and assistance on the repair of 
speed-rated tires. When you are replacing tires 
that have a speed rating, you must replace 
with tires of the same or higher speed rating 
if the speed capability of the vehicle is to be 
maintained.
VISUAL INSPECTION
INSPECT YOUR TIRES. DO NOT DRIVE ON A 
DAMAGED TIRE OR WHEEL. Check your tires 
frequently for scrapes, bulges, separations, 
cuts, snags, cracks, penetrations or excessive 
localized wear from hard braking. Also check 
for abnormal tire wear, particularly on the 
edges of the tire tread which may be caused 
by misalignment or underinflation. Impacts 
can damage the inner portion of the tire 
without being visible on the outside. If damage 
can be seen on the tires or wheels, or if you 
suspect that possible impact damage may 
have occurred, replace with spare at once and 
have your tire store or retailer inspect your 
tires immediately. Use of a damaged tire could 
result in tire destruction. When inspecting 
your tires, including the spare, check your air 
pressures. If your pressure check indicates 
that one of your tires has lost pressure of two 
pounds or more, look for signs of penetrations, 
valve leakage, or wheel damage that may 
account for the air loss.All tires will wear out faster when subjected 
to high speeds as well as hard cornering, rapid 
starts, sudden stops, frequent driving on roads 
which are in poor condition, and off-road use. 
Roads with holes and rocks or other objects 
can damage tires and cause misalignment of 
your vehicle. When you drive on such roads, 
drive on them carefully and slowly, and before 
driving again at normal or highway speeds, 
examine your tires for any damage, such 
as cuts, bulges, penetrations, unusual wear 
patterns, etc. 
TREAD WEAR INDICATORS (WEAR BARS):
Tires contain Tread Wear Indicators (Wear 
Bars) in the grooves of the tire tread which
show up when only 2/32nds of an inch 
(1.6mm) of tread is remaining. At this stage, 
your tires must be replaced. Tires worn beyond 
this stage are dangerous.
HAZARDS
Objects in the road that threaten a tire should 
be safely avoided. These objects are potholes, 
glass, metal, rocks, wood debris and the 
like. Unavoidable contact should prompt a 
thorough tire inspection. 
You may not always recall hitting an object 
that can damage or injure your tires. If while 
driving your vehicle experiences any unusual 
vibrations, ride disturbance or noise and/or you 
suspect that possible damage to the tires or 
vehicle has occurred, DO NOT JAM OR LOCK 
YOUR BRAKES! Rather reduce your speed and 
drive with caution until you can safely pull off 
the road. Stop and inspect the tires. If the tire is underinflated or damaged, deflate, remove 
the tire and rim assembly and replace it with 
your spare. If you cannot detect a cause, have 
the vehicle towed to the nearest vehicle or tire 
retailer to have the vehicle inspected. 
REPAIRING, MOUNTING AND 
DEMOUNTING OF TIRES 
Do not attempt to repair, mount or demount a 
tire yourself. Tire changing can be dangerous 
and must be done by professionally trained 
persons using proper tools and procedures 
as specified by the Rubber Manufacturers 
Association (RMA). Follow these mounting 
recommendations. Your tires should be 
mounted on wheels of correct size and type 
and which are in good, clean condition. Bent, 
chipped or rusted wheels may cause tire 
damage. The inside of the tire must be free 
from foreign materials. Have your retailer 
check the wheels before mounting new tires.
Mismatched tires and rims can explode during 
mounting. Also, mismatched tires and rims can 
result in dangerous tire failure on the road. If 
a tire is mounted by error on the wrong-sized 
rim, do not remount it on the proper rim - 
scrap it. It may be damaged internally (which 
is not externally visible) by being dangerously 
stretched and could fail on the highway. 
Old valves may leak. When new tubeless tires 
are mounted, have new valves of the correct 
type installed. Tubeless tires must be mounted 
only on wheels designed for tubeless tires, i.e., 
wheels which have safety humps or ledges. 
IMPORTANT TIRE SAFETY INFORMATION¹
(Continued on next page) 

46
HIGH PRESSURE TEMPORARY 
SPARE TIRES
1)  The high-pressure spare tire in your Infiniti 
vehicle is designed for temporary use 
only and must not be used continually as 
a regular tire. The standard tire should 
be repaired and/or replaced as soon as 
possible. 
2)  Avoid driving over obstacles that may 
damage the tire through impact or cutting, 
such as potholes, glass, metal, etc. 
3) Speed must not exceed 50MPH (80km/h) 
for non-speed-rated temporary spare tires. 
4)  Temporary spare tires have a limited 
treadlife which can vary depending on road 
conditions and your driving habits. The 
spare tire should be returned to the trunk as 
soon as the standard tire can be repaired or 
replaced. 
5) Because the high-pressure spare tire was 
specifically designed for your car, it should 
not be used on any other vehicle. 
6)  Do not use snow chains on your high-
pressure spare. This could cause damage to 
your vehicle. 
7) Check the tire’s cold inflation pressure 
monthly and maintain at 60psi (4.2kg/cm2) 
even when not in use. 8)  The high-pressure spare tire should not be 
used with any other rim nor should standard 
tires, wheel covers, or trim rings be used on 
the high-pressure spare tire rim which was 
originally installed. 
9)  When the tread wear indicator appears on 
the tire, replace it only with the same type 
spare tire. 
10)  Do not enter an automatic carwash with a 
temporary spare tire fitted. 
11)  Do not make a sharp turn or apply the 
brakes suddenly when driving on a high-
pressure temporary spare. 
Note:
When using any temporary type spare tire, 
be sure to follow the vehicle Owner’s Manual 
instructions. 
TIRE STORAGE 
All tires should be stored in a cool dry place 
indoors so that there is no danger of water 
collecting inside them. 
When tires are stored they should be stored 
in a cool place away from sources of heat 
and ozone such as hot pipes and electric 
generators. Be sure that surfaces on which 
tires are stored are clean and free from grease, 
gasoline or other substances which could 
deteriorate the rubber. (Tires exposed to these 
materials during storage or driving could be 
subject to sudden failure.)To Avoid Damage to your Tires and Possible 
Accident:
•• Check tire pressure at least once a 
month when tires are cold and before 
long trips.
•• Do not underinflate/overinflate.•• Do not overload.•• Drive at moderate speeds, observe legal 
limits.
•• Avoid driving over potholes, obstacles, 
curbs or edges of pavement.
•• Avoid excessive wheel spinning.•• If you see any damage to a tire, 
replace with spare and see the tire 
manufacturer’s retailer or your Infiniti 
retailer.
For further information, the Consumer Tire 
Guide on passenger tire care, safety and 
mileage performance is available in the United 
States by writing the Tire Industry Safety 
Council, Box 1801, Washington, D.C. 20013.
IMPORTANT TIRE SAFETY INFORMATION¹