2020 INFINITI Q50 light

2
Cockpit Overview
Upper display and audio control switch
Voice Recognition control switches
Headlight and turn signal switch
Intelligent cruise control (ICC) switches (if so equipped)
Vehicle information display control switches
Wiper and washer switch

7
To use the door handles to lock
and unlock your vehicle, make
sure the INFINITI Intelligent
Key is with you (that is, in your
pocket or purse).
•

T
ouch the inside of the door
handle
to unlock the
corresponding front door.
•


Pushing the r
equest switch
while touching the inside
of the door handle will unlock
the rest of the doors.
•


T

o lock the vehicle,
push either door handle
request switch
once.
Locking and Unlocking your
Vehicle via the Door Handle
To change the settings for the door locking and unlocking system,
press the MENU button
, then select the “Settings” key on the
lower display followed by the “Comfort & Convenience” key.
•


T

o unlock all doors by touching the
inside of the door handle, select
“Selective Door Unlock”.
•


T

o disable unlocking by touching the
inside of the door handle, select “Touch Sensitive Door Sensor”.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Two positions for the driver’s seat, steering column and outside
mirrors can be stored in the automatic drive positioner memory. To set
a memory position:
1.


Plac
e the ignition switch in the ON position. (The vehicle should
be stopped while setting the memory.)
2.


A
djust the driver’s seat, steering column and outside mirrors
to the desired positions using the adjusting switches
for each feature.
3

.
Push the
SET switch
, and within 5 seconds, push the memory
switch (1 or 2)
. The indicator light for the memory switch you
select will illuminate for approximately 5 seconds and a chime will
sound when the memory is stored.
The driver’s seat and steering column
will automatically move when the
driver’s side door is opened, to
allow the driver to get in and out of
the driver’s seat more easily. “Lift
Steering upon Exit” and “Slide Driver
Seat Back on Exit” can be adjusted in
the lower touch-screen display under
“Comfort & Convenience”.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Automatic Drive Positioner
(if so equipped)

8
Starting/Stopping the
EngineHomeLink® Universal Transceiver
(if so equipped)
HomeLink
It is important to make sure
the INFINITI Intelligent Key
is with you (that is, in your
pocket or purse).
1.


Depr
ess the brake pedal.
2.


Push the ignition swit
ch
START/STOP button to
the ON position.
TURNING THE ENGINE OFF
1.


M
ove the shift lever to the P (PARK) position
and apply the parking brake.
2.


Push the ignition swit
ch START/STOP button
to turn the engine off.
Please see your Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
To program the HomeLink® Universal Transceiver: 1.

P
osition the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink
surface, keeping the HomeLink indicator light in view.
2.



Pr

ess and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
3

.

Bo

th buttons may be released when the indicator light flashes rapidly.
4.



Pr

ess and hold the programed HomeLink button and observe the indicator light.
A solid, continuous light indicates the programing is complete. If the indicator light
rapidly blinks for two seconds and then turns to a solid, continuous light, continue
with steps for a rolling code device.
5.



A

t the receiver located on the garage door opener motor, locate the “learn” or
“smart” button. If there is difficulty locating the button, reference the garage door
opener’s manual. Once the button is pressed, you have approximately 30 seconds to
initiate the next step.
6.



Pr

ess and hold the programed HomeLink button for two seconds and release. Repeat
the sequence up to three times to complete the programing process. HomeLink should
now activate your rolling code equipped device.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.

13
To adjust the time and the appearance of the clock
on the display:
1.
Press the MENU button
below the lower
display. Then select the “Settings” key on
the lower display.
2.


L

ocate and select the “Clock” key to adjust
“On-Screen Clock”, “Daylight Savings Time”,
“Clock Format (24h)” and “Time Zone”.
Clock Set/Adjustment
Please see your INFINITI InTouch™ Owner’s Manual for important
safety information, system limitations, and additional operating
and feature information.
Connecting your Cellular Phone
or Device via Bluetooth
®*
Using Bluetooth® technology, you can connect (pair) your cellular phone with the
in-vehicle system for hands-free use of your cellular phone.
1.



Pr

ess the MENU button below the lower display.
2.



Select the

“Settings” key on the lower display.
3

.

Select the

“Connections” key.
4.



Select the

“Add New” key.
5.



F

ollow the instructions on the screen. If a PIN appears on the screen, operate the
Bluetooth
® device to enter/confirm the PIN.
The paired cellular phone will be added to the list on the “Connections” screen.
FAVORITE HANDS-FREE PHONE
•


Y

ou can register a favorite hands-free phone. The phone device name selected as a
favorite will be marked with a star.
For any Bluetooth
® connectivity issues, reboot your cellular phone or device.
* Some jurisdictions prohibit the use of cellular telephones while driving.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.