2020 HYUNDAI SONATA LIMITED driver seat adjustment

03
3-5
Front Seats
WARNING
Take the following precautions when
adjusting your seat:
• NEVER attempt to adjust the seat
while the vehicle is moving. The seat
could respond with unexpected
movement and may cause loss
of vehicle control resulting in an
accident.
• Do not place anything under the
front seats. Loose objects in the
driver’s foot area could interfere
with the operation of the foot pedals,
causing an accident.
• Do not allow anything to interfere
with the normal position and proper
locking of the seatback.
• Do not place a cigarette lighter on
the floor or seat. When you operate
the seat, gas may exit out of the
lighter causing a fire.
• Use extreme caution when picking
up small objects trapped under the
seats or between the seat and the
center console. Your hands might be
cut or injured by the sharp edges of
the seat mechanism.
• If there are occupants in the rear
seats, be careful while adjusting the
front seat position.
• Make sure that the seat is locked in
place after the adjustment. If not,
the seat might move unexpectedly
resulting in an accident.
CAUTION
To prevent injury:
• Do not adjust your seat while
wearing your seat belt. Moving the
seat cushion forward may cause
strong pressure on your abdomen.
• Do not allow your hands or fingers to
get caught in the seat mechanisms
while the seat is moving.
Manual adjustment (if equipped)
The front seat can be adjusted by using
the levers located on the outside of
the seat cushion. Before driving, adjust
the seat to the proper position so that
you can easily control the steering
wheel, foot pedals and controls on the
instrument panel.
ODN8039002
Forward and rearward adjustment
To move the seat forward or rearward:
1.

Pull up the sea
t slide adjustment lever
and hold it.
2.

Slide the sea
t to the position you
desire.
3.

R
elease the lever and make sure the
seat is locked in place. Move forward
and rearward without using the lever.
If the seat moves, it is not locked
properly.

Convenient Features
5-40
Recalling Positions from Memory
1. Shift to P (Park) while the ignition switch is in the ON position.
2.

Pr
ess the desired memory button
(1 or 2). The system will beep once,
and then the driver’s seat position,
side view mirror position, instrument
panel illumination intensity and
head-up display height/brightness
will automatically adjust to the stored
positions.
3.

“Se
ttings 1 (or 2) applied” will appear
on the cluster LCD display.
If your vehicle is equipped with
additional navigation, please refer to the
infotainment system manual separately
supplied.
Information
• While recalling the “1” memory
position, pressing the SET or 1 button
temporarily stops the adjustment of
the recalled memory position. Pressing
the 2 button recalls the “2” memory
position.
• While recalling the “2” memory
position, pressing the SET or 2 button
temporarily stops the adjustment of
the recalled memory position. Pressing
the 1 button recalls the “1” memory
position.
• While recalling the stored positions,
pressing one of the control buttons
for the driver’s seat, side view mirror,
instrument panel illumination or head-
up display will cause the movement of
that component to stop and move in
the direction that the control button is
pressed.
Resetting the Driver’s Seat
Memory System
Take the following procedures to reset
the driver’s seat memory system, when it
does not operate properly.
To reset the driver’s seat memory
system
1. Place the ignition s witch to the ON
position, shift to P (Park), and open
the driver’s door.
2.

Oper
ate the control switch to set
the driver’s seat and seatback to the
foremost position.
3.

Simultaneously pr
ess the SET button
and push forward the seat movement
switch over 2 seconds.
While resetting the driver’s seat
memory system
1. It starts with the notification sound.
2.

The driv
er’s seat and seatback is
adjusted to the rearward position with
the notification sound.
3.

The driv
er’s seat and seatback is
re-adjusted to the default position
(central position) with the notification
sound.
However, in the following cases, the
resetting procedure and the notification
sound may stop.
-

The memory butt
on is pressed.
-

The con
trol switch is operated.
-

The gear is shift
ed out of P (Park) .
-

The driving speed e
xceeds 2 mph (3
km/h).
-

The driv
er’s door is closed.

I
I-13
R
Range ........................................................................\
............................................. 4-6
Rear Cross-Traffic Collision Warning (RCCW)


................................................6-128
Rear Cross-Traffic Collision Avoidance Assist (RCCA)
...................................6-128
Rear Occupant Alert (ROA) system
.................................................................... 5-36
Rear seat adjustment
........................................................................\
.................... 3-10
Folding the rear seat


........................................................................\
................ 3-10
Rear seat head restraints
........................................................................\
.............. 3-14
Adjusting the height up and down


.................................................................. 3-14
Rear View Monitor (RVM)
........................................................................\
.......... 5-86
Recommended cold tire inflation pressures


.........................................................8-34
Recommended lubricants and capacities


.............................................................2-11
Refrigerant label


........................................................................\
.......................... 2-15
Remote key


........................................................................\
.................................... 5-4
Locking


........................................................................\
..................................... 5-4
Unlocking

........................................................................\
.................................. 5-4
T

runk unlocking

........................................................................\
........................ 5-5
Mechanical key


........................................................................\
......................... 5-5
Battery replacement


........................................................................\
.................. 5-6
Remote Smart Parking Assist (RSPA)
............................................................... 5-104
Remote start


........................................................................\
................................. 6-12
Reverse Parking Collision-Avoidance Assist (PCA)


...........................................5-89
Reverse Parking Distance Warning (PDW)
.........................................................5-95
Rocking the vehicle
........................................................................\
................... 6-140
Rotation (T

ire) ........................................................................\
............................. 8-36
S
Safe Exit Assist (SEA)
........................................................................\
................. 6-80
Function settings


........................................................................\
..................... 6-81
Function operation


........................................................................\
.................. 6-82
Function malfunction and limitations


.............................................................6-84
Safety messages
........................................................................\
............................. 1-4
Scheduled maintenance services........................................................................\
.... 8-7
Seat belt warning light Driver

’s seat ........................................................................\
............................ 3-20
Front passenger’s seat

........................................................................\
............ 3-20