2020 HYUNDAI I10 clutch

2-12
Vehicle information
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality. The correct lubricants also help promote
engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1 *2
(drain and refill)
1.0 MPI 3.1 l (2.73 lmp qt.)
API Latest (SN Plus)
1.2 MPI 3.4 l (2.99 lmp qt.)
Manual Transmission fluid1.3~1.4 l
(1.21~1.23 lmp qt.)API Serviced GL-4, SAE 70W, TGO-9
(HYUNDAI genuine transmission
fluid)
- HK SYN MTF 70W
- SPIRAX S6 GHME 70W MTF
- GS MTF HD 70W
Automated Manual
Transmission fluid1.3~1.4 l
(1.21~1.23 lmp qt.)API Serviced GL-4, SAE 70W, TGO-9
(HYUNDAI genuine transmission
fluid)
- HK SYN MTF 70W
- SPIRAX S6 GHME 70W MTF
- GS MTF HD 70W
Coolant1.0 MPI4.49 l
(3.95 lmp qt.)MIXTURE, Antifreeze with water
(Ethylene glycol base coolant for
aluminium radiator)
1.2 MPI4.77 l
(4.20 lmp qt.)
Brake/Clutch fluid0.7~0.8 l
(0.62~0.7 lmp qt.)FMVSS116 DOT-4
Fuel 36 l (7.92 lmp gal.) -
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*
2 : Engine oils labelled Energy Conserving Oil are now available. Along with other additional benefits, they con-
tribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these
improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost
and energy savings.

4-21
04
Press brake pedal to start
engine (for smart key system
and Automated Manual
Transmission)
This warning message is displayed if
the Engine Start/Stop button changes
to the ACC position twice by pressing
the button repeatedly without
depressing the brake pedal.
You can start the vehicle by depress-
ing the brake pedal.
Press clutch pedal to start
engine (for smart key system
and Manual transmission)
This warning message is displayed if
the Engine Start/Stop button is in the
ACC position twice by pressing the
button repeatedly without depressing
the clutch pedal.
Depress the clutch pedal to start the
engine.
Press START button again
(for smart key system)
This message is displayed if you
were unable to start the vehicle when
the Engine Start/Stop button was
pressed.
If this occurs, attempt to start the
engine by pressing the Engine Start/
Stop button again.
If the warning message appears each
time you press the Engine Start/Stop
button, we recommend that you have
your vehicle inspected by a HYUNDAI
authorised repairer.
Shift to N to start engine
(for smart key system and
Automated Manual
Transmission)
This warning message is displayed if
you try to start the engine with the
shift button not in the N (Neutral)
position.
i Information
lever in the 1 (1eutral) position.
Check BRAKE SWITCH fuse (for
smart key system and
Automated manual transmis-
sion)
This warning message is displayed if
the brake switch fuse is disconnect-
ed.
You need to replace the fuse with a
new one. If that is not possible, you
can start the engine by pressing the
Engine Start/Stop button for 10 sec-
onds in the ACC position.

6-16
Whilst driving
Using the clutch (if equipped)
The clutch pedal should be depressed
DOOWKHZD\WRWKHIORRUEHIRUH
- Starting the engine
The engine will not start without
depressing the clutch pedal.
- Shifting
To start your vehicle, slowly release
the clutch pedal and depress the
accelerator.
When releasing the clutch pedal,
release it slowly. The clutch pedal
should always be released whilst
driving.
NOTICE
To prevent unnecessary wear or
damage to the clutch:

6-18
Whilst driving
AUTOMATED MANUAL TRANSMISSION
ãAMT
ä
ãIF EQUIPPED
ä
3UHVVWKHVKLIWEXWWRQWKHQPRYHVKLIWOHYHU
0RYHVKLIWOHYHU
2$,,
7KH$XWRPDWHG0DQXDO7UDQVPLVVLRQ$07LVDWUDQVPLVVLRQHTXLSSHGZLWKD
gear actuator and a clutch actuator in addition to the conventional manual
transmission. To improve the driving convenience, gear shift is automatically
performed by the transmission control unit and clutch/gear actuator.

6-23
06
i Information
7he A07 warning lamp may come on
when clutch slip occurs excessively due
to repeated stop-and-go driving on
steep grades and when +ill +old is
maintained for a long time. In order to
prevent warning lamp 21, use the
brake during low speed driving on hill
or when stopping the vehicle on an
8phill slope.

6-26
Whilst driving
2$&78
7ransmission(clutch) +igh tempera-
ture (first second warning)

6-27
06
2$&782$&78
2$&78
7ransmission(clutch) overheated
(final warning)

6-45
06
Auto stop
7o stop the engine in idle stop mode
Manual transmission vehicle
'HFUHDVH WKH YHKLFOH VSHHG WR 
PSKNPK
2. Set the gear in N (Neutral).
3. Release the clutch pedal.
The auto stop indicator (
) illumi-
nates in green on the instrument clus-
ter, when the engine stops.
i Information
7he driving speed must reach at least 5
km/h (3 mph) after an idle stop to stop
the engine in idle stop mode again.
Automated Manual Transmission
vehicle
'HFUHDVH WKH YHKLFOH VSHHG WR 
km/h.
2. Depress the brake pedal with the
shift lever in D (Drive) or N (Neutral).
The auto stop indicator () illumi-
nates in green on the instrument clus-
ter, when the engine stops.
i Information
7he driving speed must reach at least 3
mph (5 km/h) after an idle stop to stop
the engine in idle stop mode again.In auto stop mode, when the driver
opens the bonnet, the ISG system
will be deactivated.
:KHQWKHV\VWHPLVGHDFWLYDWHG
2$&78
The ISG OFF button indicator illumi-
nates.
2$&78
The message, ‘‘Auto Stop is Off.
3UHVV FOXWFK SHGDO DQG VWDUW HQJLQH
manually’’, appears on the LCD dis-
play with a beep sound.