2020 HONDA CIVIC COUPE run flat

Quick Reference Guide
27
Handling the Unexpected (P 601)
Flat Tire (P 603, 610)
● Park in a safe location and replace the
flat tire with the compact spare tire
* in
the trunk, or repair the flat tire using the
tire repair kit
*.
Indicators Come On
(P 632)
● Identify the indica tor and consult the
owner's manual.
Engine Won’t Start
(P 623)
● If the battery is dead, jump start using a
booster battery.
Blown Fuse (P 638)
● Check for a blown fuse if an electrical
device does not operate.
Overheating (P 630)
● Park in a safe location. If you do not see
steam under the hood, open the hood,
and let the engine cool down.
Emergency Towing
(P 642)
●Call a professional towing service if you
need to tow your vehicle.
* Not available on all models
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 27 ページ ２０１９年６月４日　火曜 日　午前８時３２分

475
uuHonda Sensing ®u Collision Mitigation Braking SystemTM (CMBSTM)
Continued
Driving
• When there is a group of people in front of your vehicle walking together side by
side.
• Surrounding conditions or belongings of the pedestrian alter the pedestrian’s
shape, preventing the system from recogn izing that the person is a pedestrian.
• When the pedestrian is shorte r than about 3.3 feet (1 meter) or taller than about
6.6 feet (2 meters) in height.
• When a pedestrian blends in with the background.
• When a pedestrian is bent over or squatting, or when their hands are raised or
they are running.
• When several pedestrians are walking ahead in a group.
• When the camera cannot correctly identify that a pedestrian is present due to an
unusual shape (holding luggage, body position, size).
■Automatic shutoff
The CMBSTM may automatically shut itself off and the CMBSTM indicator comes and
stays on when:
• The temperature inside the system is high.
• You drive off-road or on a mountain road, or curved and winding road for an
extended period.
• An abnormal tire condition is detected (wrong tire size, flat tire, etc.).
• The camera behind the rearview mirror, or the area around the camera, including
the windshield, gets dirty.
Once the conditions th at caused the CMBS
TM to shut off improve or are addressed
(e.g., cleaning), the system comes back on.
Limitations applicable to pedestrian detection only
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 475 ページ ２０１９年６月４日　火 曜日　午前８時３２分

601
Handling the Unexpected
This chapter explains how to handle unexpected troubles.
ToolsTypes of Tools .................................. 602
If a Tire Goes Flat Changing a Flat Tire
*....................... 603
Temporarily Repair ing a Flat Tire*..... 610
Handling of the Jack ......................... 622
Engine Does Not Start Checking the Engine ........................ 623
If the Smart Entry Remote Battery is Weak .. 624Emergency Engine Stop ................... 625
Jump Starting .................................... 626
Shift Lever Does Not Move .............. 629
Overheating How to Handle Overheating ............. 630 Indicator, Coming On/Blinking
If the Low Oil Pressure Indicator Comes
On ............................................. 632
If the Charging System Indicator Comes
On ................................................. 632
If the Malfunction Indicator Lamp Comes
On or Blinks ................................... 633
If the Brake System Indicator (Red) Comes On or Blinks ................................... 634
If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the
Brake System Indicator (Amber) Comes
On ................................................. 635 If the Electric Power Steering (EPS) System
Indicator Comes On ....................... 636
If the Low Tire Pressure/TPMS Indicator Comes On or Blinks ....................... 637
Fuses Fuse Locations ................................. 638
Inspecting and Changing Fuses ........ 641
Emergency Towing ........................... 642
When You Cannot Unlock the Fuel Fill Door ................................................. 643
When You Cannot Open the Trunk.....644
Refueling ........................................... 645
* Not available on all models
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 601 ページ ２０１９年６月４日　火 曜日　午前８時３２分

uuIf a Tire Goes Flat uChanging a Flat Tire*
604
Handling the Unexpected
1. Open the trunk floor lid.
2. Take the tool case out of the trunk. Take
the jack, wheel nut wrench, and jack
handle bar out of the tool case.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tire.
4. Place a wheel block or ro ck in front and rear
of the wheel diagonal to the flat tire.
■Getting Ready to Replace the Flat Tire1 Getting Ready to Replace the Flat Tire
NOTICE
Do not mount the compact spare on the front. If
mounted on the front, the compact spare, smaller in
size than the full-size tire, may damage the
differential.
If either front tire goes flat, remove the rear tire on
the same side, and mount the compact spare on the
rear and the rear tire on the front.
The shape of the tool case varies by model.
Models with SPORT mode
Tool Case
Spare Tire
Wheel
Blocks
The tire to be replaced.
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 604 ページ ２０１９年６月４日　火 曜日　午前８時３２分

uuIf a Tire Goes Flat uChanging a Flat Tire*
606
Handling the Unexpected
1. Place the jack under the jacking point
closest to the tire to be changed.
2. Turn the end bracket cl ockwise as shown in
the image until the top of the jack contacts
the jacking point.
u Make sure that the jacking point tab is
resting in the jack notch.
3. Raise the vehicle, using the jack handle bar
and the jack handle, until the tire is off the
ground.
■How to Set Up the Jack1How to Set Up the Jack
Do not use the jack with people or luggage in the
vehicle.
Use the jack provided in your vehicle.
Other jacks may not support the weight (“load”) or
may not fit the jacking point.
The following instructions must be followed to use
the jack safely:
•Do not use while the engine is running.
•Use only where the ground is firm and level.•Use only at the jacking points.
•Do not get in the vehicl e while using the jack.
•Do not put anything on top of or underneath the
jack.
3WARNING
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tire
exactly, and no person should place any
portion of their body under a vehicle that is
supported by a jack.
Jacking Points
Jacking Point
Jack
Handle
Bar Wheel Nut
Wrench as Jack Handle
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 606 ページ ２０１９年６月４日　火 曜日　午前８時３２分

uuIf a Tire Goes Flat uChanging a Flat Tire*
608
Handling the Unexpected
1. Remove the center cap.
2. Place the flat tire face down in the spare tire
well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing bolt.
4. Securely store the jack, wheel nut wrench,
and jack handle bar back in the tool case.
Store the case in the trunk.
■Storing the Flat Tire1Storing the Flat Tire
3WARNING
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Spacer Cone
Wing Bolt
For
compact
spare tireFor full-
size tire
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 608 ページ ２０１９年６月４日　火 曜日　午前８時３２分

612
uuIf a Tire Goes Flat uTemporarily Repairing a Flat Tire*
Handling the Unexpected
1. Open the trunk floor lid.
2. Take the kit out of the case.
3. Place the kit face up, on flat ground near
the flat tire, and away from traffic. Do not
place the kit on its side.
Tire Repair Kit
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 612 ページ ２０１９年６月４日　火 曜日　午前８時３２分

uuIf a Tire Goes Flat uTemporarily Repairing a Flat Tire*
614
Handling the Unexpected
4. Plug in the compressor to the accessory
power socket.
u Be careful not to pinch the cord in a
door or window.
2 Accessory Power Socket P. 196
5.Start the engine.
2 Starting the Engine P. 435
uKeep the engine running while injecting
sealant and air.
2 Carbon Monoxide Gas P. 73
6.Turn the selector knob to REPAIR.
1Injecting Sealant and Air
NOTICE
Do not operate the temporary tire repair kit
compressor for more than 15 minutes. The
compressor can overheat and become permanently
damaged.
Until the sealant injection is complete, the pressure
shown on the pressure gauge will appear higher than
actual. After the sealant injection is complete the
pressure will drop and then begin to rise again as the
tire is inflated with air. This is normal. To accurately
measure the air pressure usi ng the gauge, turn the air
compressor off only after the sealant injection is
complete.
3WARNING
Running the engine with the vehicle in an
enclosed or even partly enclosed area can
cause a rapid build-up of toxic carbon
monoxide.
Breathing this colorless, odorless gas can
cause unconsciousness and even death.
Only run the engine to power the air
compressor with th e vehicle outdoors.
REPAIR Side
20 CIVIC 2D HCM (KA KL KC)-31TBG6400.book 614 ページ ２０１９年６月４日　火 曜日　午前８時３２分