2020 GENESIS G90 infotainment

Quick Reference Guide I 4039 I Quick Reference Guide
1. Press the A HOME button
2. Select setup > General settings > Lock Rear
Controls.
3. Select or deselect “Lock Rear Controls” to
turn ON/OFF.
4. The indicator located on the rear center controller will be illuminated.
Note: this is not a button.
RSE
LOCKED
A
Turn ON/OFF Rear Seat Controls from the front DIS controller
P Button
UNLOCK Button
TRANSMISSION
When you move the shift lever, depress the brake pedal while
pressing the UNLOCK button.
The automatic transmission has eight forward speeds and one
reverse speed. The individual speeds are selected automatically in
the D (Drive) position.
P (Park)
Always stop completely before
shifting into P (Park). To shift the
gear from R (Reverse), N (Neutral),
D (Drive) or Manual mode to
P(Park), press the [P] button while
depressing the brake pedal.
R (Reverse) / N (Neutral) / D (Drive)
To select gear, press the [UNLOCK]
button while depressing the brake
pedal and then move the shift lever
forward (R side) or backward (D side).
Scan to view a video of: Transmission –Shift by Wire
DRIVING
GENESIS G90
INFOTAINMENT

Quick Reference Guide I 4645 I Quick Reference Guide
PARKING ASSIST SYSTEM (PAS)
The parking assist system assists
the driver during movement of the
vehicle by chiming if any object is
sensed within the distance of 3.3 ft
in front and 4 ft behind the vehicle.
Press button to turn ON/OFF:
ON – indicator light on
OFF – indicator light off
If the PAS is OFF, the system will
turn ON automatically when the
shift lever is in R (reverse).
The system will automatically turn
OFF when vehicle is driven forward
at speed above 6 mph.
NOTE: Front parking sensor will not operate if the PAS is OFF.
This parking support system displays
an all-around view of the vehicle when
parking. Press the switch to activate/
deactivate the system.
Operating conditions
- When the shift lever is in the R
(reverse) position, the system is
always turned ON.
- When it is in N (neutral) or D (drive)
position, the switch has to be turned
ON.
- The vehicle speed is less than 9 mph.
SURROUND VIEW MONITOR
Scan to view a video of: Multi-View Camera System
LEADING VEHICLE DEPARTURE ALERT
HIGHWAY DRIVING ASSIST (HDA) (if equipped)
The Leading Vehicle Departure Alert system alerts the driver of the
departure of the vehicle in front when the vehicle is stopped and the
Smart Cruise Control (SCC) is in activation.
The Highway Driving Assist (HDA) system helps
keep the vehicle between lanes, maintain a
distance with the vehicle ahead, and
automatically adjusts the vehicle speed to the
speed limit while driving on the highway.
With the Engine Start/Stop button in the ON or
START position, the Highway Driving Assist can
be activated from the Settings menu in the
infotainment system screen by selecting the
following:
'Setup → Vehicle Settings → Driver Assistance →
Highway Driving Assist' Deselect the setting to
turn off the system.
To activate
Select the following items in the Vehicle Settings menu on the
infotainment screen by selecting the following:
1. Vehicle Settings
2. Driver Assistance
3. Leading Vehicle Departure Alert
The system stops operation when the setting is deactivated. However,
if the engine is turned off then on again, the system maintains in the
previous state.
NOTE: If the engine is turned off then on again, the system maintains the last setting.
Operating Conditions:
• Driving on the highway main line.
• Smart Cruise Control is operating.
- If the Smart Cruise Control is in the READY state the Highway Driving
Assist will be in the READY state. The indicator on the cluster will
illuminate white.
• Vehicle speed is under 95 mph (153 km/h).
If all the mentioned conditions are satisfied, the system is ENABLED
and the indicator on the cluster will illuminate green.
GENESIS G90
DRIVING

Quick Reference Guide I 4847 I Quick Reference Guide
REAR CROSS-TRAFFIC COLLISION-AVOIDANCE
ASSIST (RCCA)
The RCCA system uses radar
sensors to monitor approaching
vehicles to the left and right while
your vehicle is in reverse. If the risk of
collision is detected while the RCCW
is generated, brake is controlled.
The instrument cluster will inform the
driver of the brake control. If the rear
view monitor system is in activation,
a message will also appear on the
audio or AVN screen.
Activate/Deactivate
Select the following items in the
Vehicle Settings menu on the
infotainment screen by selecting the
following:
1. Select Vehicle Settings
2. Select Driver Assistance
3. Select Parking Safety
4. Select Rear Cross-Traffic Safety
SAFE EXIT ASSIST (SEA)
The Safe Exit Assist system helps prevent passengers from opening the
door when a vehicle is approaching from the rear area. After the vehicle
stops and an approaching vehicle from the rear area is detected, the
rear door does not open from the inside handle. A “check surroundings
then try again” warning message will appear on the cluster and a warning
sound will go off.
Activate/Deactivate
Select the following items in the Vehicle
Settings menu on the infotainment
screen by selecting the following:
1. Select Vehicle Settings
2. Select Driver Assistance
3. Select Blind-Spot Safety
4. Select Safe Exit Assist
When an approaching vehicle from the
rear is detected and the door is already
opened, a “watch for traffic” warning
message appears and a warning sound
will go off.
GENESIS G90
DRIVING