2020 GENESIS G90 air conditioning

Parking Distance Warning
(Reverse/Forward ) System ......3-102
Operation of the Parking DistanceWarning System ..........................3-103
Non-operational Conditions of Parking Distance Warning System ..........3-105
Parking Distance Warning System Precautions ..................................3-106
Parking Collision-Avoidance Assist -
Reverse ......................................3-107
System Setting and Operation ....3-107
Warning and System Control ......3-108
Detecting Sensor ..........................3-110
System Malfunction ......................3-112
Limitations of the System ............3-112
Surround View Monitor..............3-114
Blind-Spot View Monitor
System ........................................3-116
Automatic Climate Control
System ........................................3-117
Automatic Heating and AirConditioning ................................3-118
Manual Heating and Air Conditioning ..........................3-119
System Operation ........................3-129
System Maintenance ....................3-130
Defroster ....................................3-132
Rear Window Defroster ................3-132
Front Wiper Deicer........................3-132
Windshield Defrosting and
Defogging ..................................3-133
Climate Control Additional
Features ......................................3-135
Auto Defogging System................3-135
Clean Air ........................................3-136
Automatic Ventilation ..................3-136
Sunroof Inside Air Recirculation ..3-137
Setting the Climate Control System in the AVN System Screen ..........3-137
Storage Compartment ..............3-139
Center Console Storage ..............3-139
Rear Console Storage ..................3-139
Glove Box ......................................3-140
Sunglass Holder ............................3-140
Interior Features ........................3-141
Cup Holder ....................................3-141
Sunvisor ........................................3-142
Rear Mirror ....................................3-142
Power Outlet ................................3-143
USB Charger ..................................3-144
Wireless Cellular Phone ChargingSystem ..........................................3-145
Coat hook ......................................3-147
Clock ..............................................3-147
Bag Hanger ..................................3-148
Floor Mat Anchor(s) ......................3-148
Rear Window Sunshade ..............3-149
Rear Side Window Sunshade ......3-150
Luggage Net Holder ......................3-151
3
3 3 .
.
C
C o
on
nv
ve
e n
n i
ie
e n
n t
t
F
F e
e a
at
tu
u r
re
e s
s
o
o f
f

Y
Y o
ou
ur
r
V
V e
eh
h i
ic
c l
le
e

3-117
0
03
3
A
A U
U T
TO
O M
M A
AT
TI
IC
C
C
C L
LI
IM
M A
AT
TE
E
C
C O
O N
NT
TR
R O
O L
L
S
S Y
Y S
ST
TE
EM
M
Front
1. Driver's temperature control knob
2. Driver's AUTO button
3. Driver's mode selection button
4. Front windshield defroster button
5. Rear window defroster button
6. SYNC button
7. AQS (Air quality system) button
8. Air intake control button
9. Passenger's mode selection button
10. Passenger's temperature control
knob
11. Passenger's AUTO button
12. Driver's fan speed control button
13. OFF button 14. Climate control information screen
selection button
15. Air conditioning button
16. Passenger's fan speed control button
Rear
17. Rear fan speed control knob
18. Rear mode selection button
19. Rear OFF button
20. Rear AUTO button
21. Rear temperature control knob
22. LCD display
■
■Front
■ Rear
OHI048339L/OHI048302L

3-118
Convenient features of your vehicle
Automatic Heating and Air
Conditioning
The Automatic Climate Control System
is controlled by setting the desired tem-
perature.
1. Press the AUTO button.
The modes, fan speeds, air intake
and air-conditioning will be controlled
automatically by the temperature set-
ting you select.2. Turn the temperature control knob
to the desired temperature. If the
temperature is set to the lowest
setting (Lo), the air conditioning
system will operate continuously.
After the interior has cooled suffi-
ciently, adjust the knob to a higher
temperature set point whenever
possible.
To turn the automatic operation off,
select any function of the following:
- Mode selection button
- Air conditioning button
- Front windshield defroster button (Press the button one more time to
deselect the front windshield
defroster function. The 'AUTO' sign
will illuminate on the climate infor-
mation screen once again.)
- Fan speed control button
OHI048305
■
Driver's side
OHI048308
OHI048307
■Front
Driver's side Passenger's side
■ Passenger's side
■Rear

3-119
0
03
3
The selected function will be con-
trolled manually while other functions
operate automatically.
For your convenience and to improve
the effectiveness of the climate con-
trol, use the AUTO button and set the
temperature to 72°F (22°C).
Information
Never place anything near or covering
the sensor (both inside and outside the
vehicle) to ensure better control of the
heating and cooling system.
Manual Heating and Air
Conditioning
The heating and cooling system can
be controlled manually by pushing
buttons other than the AUTO button.
In this case, the system works
sequentially according to the order of
buttons selected.
When pressing any button except the
AUTO button while using automatic
operation, the functions not selected
will be controlled automatically.
1. Start the engine.
2. Set the mode to the desired posi-
tion.
To improve the effectiveness of heating and cooling, select the
mode according to the following:
- Heating:
- Cooling:
3. Set the temperature control to the desired position.
4. Set the air intake control to Fresh mode.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
7. Press the AUTO button in order to convert to full automatic control of
the system.
The climate control system settings
will be maintained, even when the
engine is turned OFF. However, the
climate control system settings will
be initialized when the battery has
been discharged, or when the cables
have been disconnected. In this
case, adjust the climate control sys-
tem settings again.
i
OHI048309

3-123
0
03
3
Instrument panel vents
The instrument panel vent air flow
can be directed up/down or left/right
using the vent adjustment lever.
The air flow can be closed using the
thumbwheel. To close the vent rotate
it left ( ). To open the vent, rotate it
right ( ).
Temperature control
The temperature will increase by
turning the knob to the right. The
temperature will decrease by turning
the knob to the left. The temperature
will increase or decrease by 1°F
(0.5°C). When set to the lowest tem-
perature setting, the air conditioning
will operate continuously.
Temperature conversion
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Centigrade.
To change the temperature unit from
°C to °F or °F to °C :
- Automatic climate control system
Press the AUTO button for 3 sec-
onds while pressing the OFF but-
ton.
OHI048315
■ Front
■Rear
OHI048308
OHI048307
■Front
Driver's side Passenger's side
■ Rear

3-125
0
03
3
Air intake control
The air intake control button is used
to select either Fresh mode (outside
air) or Recirculation mode (cabin air).
Recirculation mode
When Recirculation mode
is selected, air from the
passenger compartment
will be recirculated through
the system and heated or
cooled according to the
function selected.
Fresh mode
When Fresh mode is selected, air enters the
vehicle from outside and
is heated or cooled
according to the function
selected.
Information
Operating the system primarily in
Fresh mode is recommended. Use
Recirculation mode temporarily only
when needed.
Prolonged operation of the heater in
Recirculation mode and without the
A/C ON can cause fogging of the
windshield.
In addition, prolonged use of the A/C
ON in Recirculation mode may result
in excessively dry, dehumidified air in
the cabin and may promote formation
of musty vent odor due to stagnant air.
i
OHI048340
Continued use of the climate control system operation in
Recirculation mode for a pro-
longed period of time may
cause drowsiness to the
occupants in the cabin. This
may lead to loss of vehicle
control which may lead to an
accident.
Continued use of the climate control system operation in
Recirculation mode with the
A/C OFF may allow humidity
to increase inside the cabin.
This may cause condensation
to accumulate on the wind-
shield and obscure visibility.
Do not sleep in your vehicle or remain parked in your vehicle
with the windows up and
either the heater or the air
conditioning ON for pro-
longed periods of time. Doing
so may increase the levels of
carbon dioxide in the cabin
which may lead to serious
injury or death.
WARNING

3-128
Convenient features of your vehicle
Air conditioning
Push the A/C button to manually turn
the system on (LED ON) and off.
OFF mode
Push the OFF button to turn off the
climate control system.
Climate control informationscreen selection button
Press the climate control information
screen selection button to display cli-
mate control information on the AVN
system screen.
OHI048325L
■Front
OHI048326
■Rear
OHI048341L
OHI048323

3-129
0
03
3
System Operation
Cooling / Ventilation
1. Select the Face Level mode.
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Select the Floor Level mode.
2. Set the air intake control to freshmode.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If desired, turn the air conditioning ON with the temperature control
knob set to heat in order to dehu-
midify the air before it enters into
the cabin.
If the windshield fogs up, select the
Floor & Defrost mode or press
the Front Defrost mode.
Operation Tips
To keep dust or unpleasant fumes from entering the car through the
ventilation system, temporarily set
the air intake control to the recircu-
lation mode. Return the control to
the to fresh mode when the
unpleasant air outside has dimin-
ished. This will help keep the driv-
er alert and comfortable.
To help prevent the inside of the windshield from fogging, set the air
intake control to fresh mode and
the fan speed to the desired posi-
tion, turn on the air conditioning
system, and adjust the tempera-
ture control to the desired temper-
ature.
Air conditioning
Your Genesis Branded Vehicle air
conditioning system is filled with R-
1234yf refrigerant.
1. Start the engine.
2. Press the air conditioning button.
3. Select the Face Level mode.
4. Set the air intake control toRecirculation mode temporarily to
allow the cabin to cool quickly.
When the desired temperature in
the cabin is reached, change the
air intake control back to Fresh
mode.
5. Adjust the fan speed control and temperature control to maintain
maximum comfort.
When maximum cooling is desired,
set the temperature control to the
lowest temperature setting, then set
the fan speed control to the highest
setting.