2020 CITROEN C5 bulb

220
C5_en_Chap08_en-cas-de-panne_ed01-2016
Directional lamp
F Remove the protective cap C.
F D isconnect the connector by pressing it
between the thumb and index finger.
F

F
ree the bulb from its two metal clamps.
F

T
ake out the bulb.
F

R
eplace the bulb, exerting a slight axial
force.
F

R
efit the connector, until it is all the way in.
F

R
efit the protective cap C .
Direction indicators
F Refit the connector (push the grey tongue
in well).
F

R
efit the headlamp unit in the bumper.
F

R
efit the lamp screws.
F

P
osition the cover using its guides and refit
the screws.
Bulbs:
HP24
F
R
emove the fixing screw of cover A using a
torx tool, tip the cover over and remove.
F

R

emove the fixing screw of lamp B using
a torx tool, then pull the lamp to remove it
from the bumper.
F

D

etach the bulb C by pressing on bars 1
and 2 .
F

D

isconnect the connector (pull whilst
pressing on the grey tongue using a flat
screwdriver).
F

R

eplace the bulb.
In the event of a breakdown

221
C5_en_Chap08_en-cas-de-panne_ed01-2016
Side repeaters
The side repeater is sealed.
If the bulb is faulty, replace the side repeater.
Contact a CITROËN dealer or a qualified
workshop.
Front foglamps
F Disconnect the connector D.
F R emove the bulb by per forming a quarter
of a turn.
F

R
eplace the bulb.
F

R
efit the connector D .
F

R
efit the headlamp unit in the bumper.
F

R
efit the lamp screws.
F

P
osition the cover using its guides and refit
the screws. When refitting, take care not to trap
the electrical
wiring.
Bulbs:
H8
F
R
emove the fixing screw of cover A using a
torx tool, tip the cover over and remove.
F

R

emove the fixing screw of lamp B using a
torx tool, then pull on the lamp to remove it
from the bumper.
8
In the event of a breakdown

222
C5_en_Chap08_en-cas-de-panne_ed01-2016
Rear lamps (Saloon)
Identify the failed bulb.
1. Brake lamps and sidelamps: P21W/5 W
2.
S

idelamps: R5W
3.
R

eversing lamps: H21W
4.
F

oglamps: H21W
5.
D

irection indicators: PY21WBoot lid-mounted lamps
F Refit the bulb holder H .
F C heck that the bulb holder H is secured
correctly by the two clips E .
F

R
efit the connector G .
F

R
eplace and fix the trim F with its 3 clips.
F
O
pen the boot.
F
U
sing a flat screwdriver, remove the 3 clips
which fix the trim in the lamp area.
F

P

artially remove the trim F .
F

D

isconnect the connector G .
F

U

nclip the bulb holder H .
F

R

eplace the failed bulb.
In the event of a breakdown

223
C5_en_Chap08_en-cas-de-panne_ed01-2016
Wing-mounted lamps
F Remove the lateral boot trim flap A. To do
so, pull it towards the inside of the boot,
then pull it upwards.
F

D
isconnect connector B .
F

U
nscrew the 2 fixings C .
F

R
emove the lamp from its housing. F

D
etach the bulb holder D
.
F
R
eplace the failed bulb.
F
R
efit the bulb holder D
.
F
P
lace the lamp in its housing.
F
S
crew in the 2 fixings C
.
F
R
efit connector B
.
F
R
efit the side boot trim A
.
For vehicles fitted with a Hi-Fi amplifier, on the
right-hand side slacken the screw by a quarter
turn, then pull the boot side trim A up. You can use the wheelbrace to screw or
unscrew the fixings C
.
8
In the event of a breakdown

224
C5_en_Chap08_en-cas-de-panne_ed01-2016
Tailgate-mounted lamps
Rear lamps (Tourer)
Identify the failed bulb.
1. Brake lamps and sidelamps: P21W/5 W
2.
S

idelamps: R5W
3.
R

eversing lamps: H21W
4.
F

oglamps: H21W
5.
D

irection indicators: PY21W F

R
efit the bulb holder H ensuring that it is
correctly clipped in place.
F

P
osition the lamp in its housing.
F

T
ighten the fixing nut G.
F

R
efit the connector F.
F

P
osition and clip in place the plastic
cover
E.
F

O
pen the boot.
F

U
sing a flat screwdriver, remove the plastic
cover E .
F

D
isconnect the connector F.
F

U
nscrew the fixing nut G.
F

D
isengage the lamp from its housing.
F

U
nclip the bulb holder H.
F

R
eplace the failed bulb.You can use the wheelbrace to screw or
unscrew the fixing nut G.
In the event of a breakdown

225
C5_en_Chap08_en-cas-de-panne_ed01-2016
Wing-mounted lamps
F Pull away the flap in the boot side trim A.
To do this, pull it towards the middle of the
boot, then pull it up.
F

D
isconnect the connector B .
F

U
nscrew the fixing nut C .
F

R
emove the lamp from its housing. F

D
etach the bulb holder D
.
F
R
eplace the faulty bulb.
F
R
efit the bulb holder D
.
F
P
lace the lamp in its housing.
F
S
crew in the fixing nut C
.
F
R
efit the connector B
.
F
R
efit the side boot trim A
.
For vehicles fitted with a Hi-Fi amplifier, on the
right-hand side slacken the screw by a quarter
turn, then pull the boot side trim A up. You can use the wheelbrace to screw or
unscrew the fixing nut C
.
8
In the event of a breakdown

226
C5_en_Chap08_en-cas-de-panne_ed01-2016
F Insert a thin screwdriver into one of the external holes of the lens.
F

P
ush it outwards to unclip it.
Third brake lamp (LEDs)
For the replacement of this type of light emitting
diode lamp, contact a CITROËN dealer or a
qualified workshop.
F

R

emove the lens.
F
C
hange the faulty bulb.
Number plate lamps (W5W)
In the event of a breakdown

227
C5_en_Chap08_en-cas-de-panne_ed01-2016
Interior lamps
Courtesy lamps
Bulb: W5W
F U nclip the transparent cover of the roof
lamp to reach the bulb.
Rear reading lamps (Tourer)
Bulb: W5W
F D etach the cover of the reading lamp to
access the bulb.
Map reading lamps
Bulb: W5W
F D etach the cover.
F

I
f necessary, detach the partition of the
affected map reading lamp.
Boot lamp
Bulb: W5W
F D etach the lamp cover for access to the
bulb.
8
In the event of a breakdown