160
C1_en_Chap08_en-cas-pannes_ed01-2016
Removing a wheel
F Remove the label from the middle of the s
pare wheel (indicating that a wheel needs
r
epair), and fix it inside the vehicle, where
t
he driver can see it.
F
R
emove the wheel trim using the end of the
w
heelbrace.
F
S
lacken the wheel bolts using the
w
heelbrace 1 . F
P osition the foot of the jack 2 on the ground a
nd ensure that it is directly below one
o
f the jacking points A or B located on
t
he underbody, closest to the wheel to be
c
hanged.
Ensure
that the jack is stable. If the ground is slippery or loose, the jack may slip or drop -
R
isk of injury!
Ensure
that the jack is positioned only at one of the jacking points A or B under the vehicle,
m
aking sure that the vehicle's contact area is centred on the head of the jack. Other wise
t
here is a risk of damage to the vehicle and/or of the jack dropping - Risk of injury !
F
E xtend the jack 2 until its head is in contact
w
ith the jacking point A or B used. The
c
ontact area A or B on the vehicle used
m
ust engage correctly with the middle of
t
he head of the jack.
In the event of a breakdown
