2020 CITROEN C1 light

32
C1_en_Chap02_ouvertures_ed01-2016
Remote control
This is used to lock, unlock and locate the vehicle at a distance.
Unfolding / Folding the keyLocking
F Press  this   button   to   unfold   /   fold   the   key.F  
P
ress   the   closed   padlock   to   lock  
t

he   vehicle.
The   direction   indicators   flash   once.
After   locking,   if   you   notice   that   a   door  
i

s   not   closed   properly,   close   it   then   lock  
t

he   vehicle   again.
F  
P
ress   the   open   padlock   to   unlock  
t

he   vehicle.
Unlocking
The direction indicators flash twice.F  
P
ress   the   closed   padlock   to  
l

ocate   your   locked   vehicle   in   a  
c

ar
 par
k.
Locating your vehicle
This is indicated by lighting of the direction i
ndicators   for   a   few   seconds.
The
  high   frequency   remote   control   is
 a

  sensitive   system;   do   not   handle   it   in
 y

our   pockets   as   there   is   a   risk   that   it   may
 u

nlock   the   vehicle   without   you   being
 a

ware   of   this.
Avoid
  pressing   the   buttons   of   your
 r

emote   control   out   of   range   of   your
 v

ehicle,   you   risk   rendering   it   inoperative.
Access

49
C1_en_Chap03_ergonomie-confort_ed01-2016
Rear head restraints*
The rear head restraints can be removed and have   two   positions:
-
 
h
igh,   position   for   use.
-
 
l
ow,   storage   position. To
  raise   the   head   restraint,   pull   it   upwards.
To
  lower   it,   press   lug   A   then   the   head   restraint.
To
  remove   it:
-
 
t
ilt   the   seat   back   slightly,
-
 
m
ove   the   head   restraint   to   the   high  
p

osition,
-
 
p
ress   lug   A   pulling   the   head   restraint  
u

pwards   at   the   same   time.To
  refit   it:
-
 
t
ilt   the   seat   back   slightly,
-
 
e
ngage   the   rods   of   the   head   restraint   in   the  
o

penings.
*
  Depending   on   version.
To
  put   the   head   restraint   in   the   low   position,  
p

ress   lug   A.
3
Ease of use and comfort

55
C1_en_Chap03_ergonomie-confort_ed01-2016
Manual air conditioning
The air conditioning system only operates with the engine running.
F  
T
urn   the   control   knob   from  
b

lue   (cold)   to   red   (hot)   to  
a

djust   the   temperature   to   your  
r

equirements.
Temperature adjustment
Air flow adjustment
F Turn  the   control   knob   from  p
osition 1 to position 4 to obtain
a
  comfortable   air   flow.
If you put the air flow control in
position


0 (system   off),   the   temperature   is   no  
l

onger
 
controlled.   However,   a   slight   flow   of   air  
c

an
 
still
 
be
 
felt,   resulting   from   the   movement   of  
t

he
 
vehicle.
Air distribution adjustment
Centre and side vents.
C entre   and   side   air   vents,   footwells.
Footwells.
Windscreen
  and   footwells.
Windscreen.
3
Ease of use and comfort

59
C1_en_Chap03_ergonomie-confort_ed01-2016
Avoid driving for long periods with the air conditioning   switched   off   (risk   of   misting a

nd   reduction   of   the   air   quality   in   the   cabin).
This action switches off all of the functions of
the  air   conditioning   system.
Thermal
  comfort   is   no   longer   controlled.  
A s

light   flow   of   air   resulting   from   the   movement  
o

f   the   vehicle,   remains   perceptible   however.
Pressing
  the   "AUTO"
 
button   again   reactivates  
t

he   system   with   the   values   set   before   it   was  
s

witched   off.
Switching the system off
F Press   the   air   flow   adjustment  b
utton   until   the   fan   symbol  
d

isappears.
F
P
ress this button to stop the air
conditioning.
Air conditioning on / off
Stopping the air conditioning may cause some p roblems   (humidity,   misting).
Automatic
  operation   of   the   air   conditioning   is  
r

esumed   when   the   button   is   pressed   again.  
The "A /C "
 

symbol   is   displayed.
3
Ease of use and comfort

70
C1_en_Chap04_conduite_ed01-2016
A few driving recommendations
Observe the driving regulations at all times and remain   vigilant   whatever   the   traffic   conditions.
Pay
  close   attention   to   the   traffic   and   keep   your  
h

ands   on   the   wheel   so   that   you   are   ready   to  
r

eact   at   any   time   to   any   eventuality.
On
  a   long   journey,   a   break   every   two   hours   is  
s

trongly
 re
commended.
In
  difficult   weather,   drive   smoothly,   anticipate  
t

he   need   to   brake   and   increase   the   distance  
f

rom   other   vehicles. Never
  drive   with   the   parking   brake  
a

pplied   -   Risk   of   overheating   and  
d

amage   to   the   braking   system!
Do
  not   park   or   run   the   engine   when  
s

tationary   in   areas   where   inflammable  
s

ubstances   and   materials   (dry   grass,  
d

ead   leaves...)   might   come   into  
c

ontact with   the   hot   exhaust   system   -  
R

isk   of   fire!
Never
  leave   a   vehicle   unsupervised  
w

ith   the   engine   running.   If   you   have  
t

o   leave   your   vehicle   with   the   engine  
r

unning,   apply   the   parking   brake  
a

nd   put   the   gearbox   into   neutral   or  
p

osition

N,
  depending   on   the   type   of  
g

earbox.
Driving on flooded
roads
We strongly advise against driving on flooded roads,   as   this   could   cause   serious   damage  
t

o   the   engine   or   gearbox,   as   well   as   to   the  
e

lectrical   systems   of   your   vehicle.
Important!If you are obliged to drive through water:
-  
c
heck   that   the   depth   of   water   does   not  
e

xceed   15   cm,   taking   account   of   waves  
t

hat   might   be   generated   by   other   users,
-
 
d
eactivate   the   Stop   &   Start   system,
-
 
d
rive   as   slowly   as   possible   without  
s

talling.   In   all   cases,   do   not   exceed   6   mph  
(

10 km/h),
-
 
d
o   not   stop   and   do   not   switch   off   the  
e

ngine.
On
  leaving   the   flooded   road,   as   soon   as  
c

ircumstances   allow,   make   several   light   brake  
a

pplications   to   dry   the   brake   discs   and   pads.
If
  in   doubt   on   the   state   of   your   vehicle,   contact  
a

  CITROËN   dealer   or   a   qualified   workshop.
Driving

71
C1_en_Chap04_conduite_ed01-2016
Starting - switching off the engine with the key
1. "LOCK "   position.  T
he   steering   column   is   unlocked.
2.
" AC

C"
  position.
 T

he   ancillaries   (audio   system,  
1

2V socket...)   can   be   used.
3.


"ON " position
 I

gnition   on.
4.
" S

TA R T"
  position.
 E

ngine
 s
tarting.
Ignition switch
For vehicle fitted with a manual gearbox:
F I nsert   the   key   in   the   ignition   switch.
F
 
T
urn   the   key   to   position   2.
F
 
U
nlock   the   steering   column,   by   turning   the  
w

heel   slightly.
F
 
F
ully   depress   the   clutch   pedal.
F
 
P
ut   the   gear   lever   into   neutral.
F
 
O
perate   the   starter   by   turning   the   key   to  
p

osition 4 (S TA R T ) .
F
 
O
nce   the   engine   is   running,   release  
t

he key.
 T

he   key   returns   automatically   to   position   3
(ON) .
Starting using the key
For vehicles fitted with an ETG gearbox:
F
 I nsert   the   key   in   the   ignition   switch.
F
 
T
urn   the   key   to   position   2.
F
 
U
nlock   the   steering   column,   by   turning   the  
w

heel   slightly.
F

P
ress and hold the brake pedal .
F
 
P
ut   the   gear   selector   into   position   N.
F
 
O
perate   the   starter   by   turning   the   key   to  
p

osition 4 (S TA R T ) .
F
 
O
nce   the   engine   is   running,   release  
t

he key.
 T

he   key   returns   automatically   to   position   3
(ON) .
If
 
you
 
use
 
the
 
ancillaries
 
for
 
a
 
prolonged
 
p

eriod
 
(key
 
in
 
position
 
2 or 3 ),
 
you
 
risk
 
d

ischarging
 
the
 
battery.
 
Starting
 
your
 
v

ehicle
 
will
 
then
 
no
 
longer
 
be
 
possible.
 
B

e aware.
Never
 
leave
 
the
 
engine
 
running
 
in
 
a

n
 
enclosed
 
area
 
without
 
adequate
 
v

entilation:
 in

ternal
 c

ombustion
 e

ngines
 
emit
 
toxic
 
exhaust
 
gases,
 
s

uch
 
as
 
carbon
 
monoxide.
 
Danger
 
of
 
i

ntoxication
 
and
 
death.
 
In
 
very
 
severe
 
w

inter
 
conditions
 
(temperatures
 
b

elow -23°C),
 
it
 
is
 
necessary
 
to
 
allow
 
t

he
 
engine
 
to
 
run
 
for
 
4
 
minutes
 
before
 
s

etting
 
off,
 
in
 
order
 
to
 
ensure
 
the
 
c

orrect
 
operation
 
and
 
durability
 
of
 
t

he
 
mechanical
 
components
 
of
 
your
 
v

ehicle,
 
the
 
engine
 
and
 
gearbox.
4
Driving

73
C1_en_Chap04_conduite_ed01-2016
Starting using the
electronic key
With the first press on the "S TA R T/
STOP "
  button,   this   indicator   lamp f

lashes   slowly   in   the   instrument   panel.Depending
  on   the   ambient   temperature,  
e

ach   attempt   at   starting   can   take   up   to  
a

round   30   seconds.   During   this   period,  
d

o   not   press   the   "START/STOP " button
again,
  or   release   the   clutch   pedal   or  
b

rake   pedal   (depending   on   the   type   of  
g

earbox).
After
  this   period,   if   the   engine   has   not  
s

tarted,   press   the   "START/STOP "
button
  again   for   another   attempt   at  
s

tarting. If
  one   of   the   starting   conditions   is  
n

ot   met,   the   "Keyless   Entry   and  
S

tarting"   system   indicator   lamp   flashes  
i

n   the   instrument   panel.   In   some  
c

ircumstances,   it   is   necessary   to  
t

urn   the   steering   wheel   slightly   while  
p

ressing   the   "
START/STOP " button to
assist   unlocking   of   the   steering.
For vehicles fitted with a manual gearbox:
F
 
W

ith
 
the   electronic   key   inside   the   vehicle,  
p

ut
 
the   gear   lever   into   neutral   and   fully  
d

epress   the   clutch   pedal. The
  presence   of   the   electronic   key   in  t
he   vehicle   is   essential   for   switching  
o

n   the   ignition   and   starting   only.   Once  
t

he   engine   has   started,   make   sure   that  
t

he   electronic   key   remains   with   the  
v

ehicle   until   the   end   of   the   journey:  
o

ther wise   you   would   not   be   able   to   lock  
t

he vehicle.
F
 
P
ress   and   release   the   "S TA R T/
STOP "
  button.
This
  indicator   lamp   comes   on   in   the  
in

strument
 pan
el. For vehicles fitted with an ETG gearbox:
F
 
W
ith   the   electronic   key   inside   the   vehicle,  
p

ut   the   gear   selector   at   N   and   press   the  
b

rake
 ped
al.
This   indicator   lamp   comes   on   in   the  
in

strument
 pan
el.
F  
P
ress   and   release   the   "
S TA R T/
STOP "   button.
4
Driving

83
C1_en_Chap04_conduite_ed01-2016
Stop & Start (VTi 68 S&S engine)
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument   panel   and   the   engine  
g

oes   into   standby   automatically:
-
 
w

hen
  stationary,   in   neutral,   and   you  
r

elease   the   clutch   pedal.
Never
  refuel   with   the   engine   in  
S

TOP mode;   you   must   switch   off   the  
i

gnition   with   the   button.
For
  smoother   operation,   during  p
arking   manoeuvres   STOP   mode   is  n
ot   available   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
The
  Stop   &   Start   does   not   affect   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time counters
A partial time counter counts the periods in S TOP   mode   during   a   journey.
It
  is   displayed   in   the   trip   computer   once   the  
S

top   &   Start   is   operating.
Press one of the " DISP" buttons to return to the
previous
 d

isplay.
A
  global   time   counter   counts   the   periods   in  
S

TOP   mode   since   the   last   reset.
When
  it   is   displayed,   press   one   of   the  
"D

ISP " buttons
  to   reset   the   counter.
4
Driving