2020 CHRYSLER 300 tire size

authorized
tire
dealer
for
recommended
safe
operating
speeds,
loading

and
cold
tire
inflation
pressures.
While
studded
tires
improve
performance
on
ice,
skid
and
traction

capability
on
wet
or
dry
surfaces
may
be
poorer
than
that
of
non-studded

tires.
Some
states
prohibit
studded
tires;
therefore,
local
laws
should
be

checked
before
using
these
tire
types.
Spare Tires—IfEquipped
NOTE:

For
vehicles
equipped
with
Tire
Service
Kit
instead
of
a
spare
tire,
please

refer
to
“Tire
Service
Kit”
in
“In
Case
Of
Emergency”
in
your

Owner ’s
Manual
for
further
information.
CAUTION!
Because of the reduced ground clearance, do not take your vehicle
through an automatic car wash with a compact or limited use
temporary spare installed. Damage to the vehicle may result.
TIRES
SpareTireMatching Original Equipped Tire And Wheel —If
Equipped
Your
vehicle
may
be
equipped
with
a
spare
tire
and
wheel
equivalent
in

look
and
function
to
the
original
equipment
tire
and
wheel
found
on
the

front
or
rear
axle
of
your
vehicle.
This
spare
tire
may
be
used
in
the
tire

rotation
for
your
vehicle.
If
your
vehicle
has
this
option,
refer
to
an

authorized
tire
dealer
for
the
recommended
tire
rotation
pattern.
Compact Spare Tire—IfEquipped
The
compact
spare
is
for
temporary
emergency
use
only.
Yo u
can
identify

if
your
vehicle
is
equipped
with
a
compact
spare
by
looking
at
the
spare

tire
description
on
the
Tire
and
Loading
Information
Placard
located
on

the
driver ’s
side
#QJMMBS

UIF
SFBS
FEHF
PG
UIF
ESJWFST
TJEF
EPPS
or
on
the

sidewall
of
the
tire.
Compact
spare
tire
descriptions
begin
with
the

letter
“T”
or
“S”
preceding
the
size
designation.
Example:
T145/80D18

103M.
T,
S
=
Temporary
Spare
Tire
Since
this
tire


has
limited
tread
life,
the
original
equipment
tire
should
be

repaired
(or
replaced)
and
reinstalled
on
your
vehicle
at
the
first

opportunity.
Do
not
install
a
wheel
cover
or
attempt
to
mount
a
conventional
tire
on

the
compact
spare
wheel,
since
the
wheel
is
designed
specifically
for
the
20

Full Size Spare — If Equipped
The full size spare is for temporary emergency use only. This tire may
look like the originally equipped tire on the front or rear axle of your
vehicle, but it is not. This spare tire may have limited tread life. When the
tread is worn to the tread wear indicators, the temporary use full size
spare tire needs to be replaced. Since it is not the same as your original
equipment tire, replace (or repair) the original equipment tire and
reinstall on the vehicle at the first opportunity.
Limited Use Spare — If Equipped
The limited use spare tire is for temporary emergency use only. This tire
is identified by a label located on the limited use spare wheel. This label
contains the driving limitations for this spare. This tire may look like the
original equipped tire on the front or rear axle of your vehicle, but it is
not. Installation of this limited use spare tire affects vehicle handling.
Since it is not the same as your original equipment tire, replace (or repair)
the original equipment tire and reinstall on the vehicle at the first
opportunity.
WARNING!
Limited use spares are for emergency use only. Installation of this
limited use spare tire affects vehicle handling. With this tire, do not
drive more than the speed listed on the limited use spare wheel.
Keep inflated to the cold tire inflation pressures listed on your Tire
and Loading Information Placard located on the driver ’s side B-Pillar
or the rear edge of the driver ’s side door. Replace (or repair) the
original equipment tire at the first opportunity and reinstall it on
your vehicle. Failure to do so could result in loss of vehicle control.
TIRES22

For Example Only:
Gauge reading of hot tire:................................ 32 psi (220 kPa)
If recommended cold inflation pressure is: ............. 30 psi (205 kPa)
Desired gauge reading of hot tire 30 + 4 psi = ........
34 psi (205 + 30 = 235 kPa)
Therefore: add 2 psi ....................................... (15 kPa)
BFGOODRICH TIRES
Check

cold
pressure
as
soon
as
possible,
preferably
within
24
hours.

“Bleeding”
air
from
hot
tires
could
result
in
underinflation.
Use
an

accurate
tire
gauge
to
check
pressures.
Never
allow
children
to
inflate

or
deflate
tires.
TIREPRESSURE MONITORING SYSTEM(TPMS):
Your
vehicle
may
be
equipped
with
a
Ti re
Pressure
Monitoring
System

(TPMS)
that
is
designed
to
monitor
the
pressure
of
tires
mounted
on
your

vehicle
and
sends
a
signal
to
the
driver
if
a
tire
pressure
falls
below
a

predetermined
level.
A
TPMS
should
not
replace
monthly
manual

pressure
checks
for
all
four
(4)
tires
and
the
spar e.

We
recommend
that

you
manually
monitor
and
check
tire
pressure
inflation
with
a
pressure

gauge.
Your
tires
should
have
the
recommended
pressure
listed
by
your

vehicle’s
manufacturer.
This
information
can
be
found
in
the
vehicle

owner ’s
manual
and
often
on
a
placard
located
in
the
vehicle’s
door

jamb,
inside
the
fuel
hatch,
or
on
the
glove
compartment
door.
If
you

have
a


plus
size
fitment
that
requires
a
higher
inflation
pressure,
your
tire

pressure
monitoring
system
will
require
re-calibration
to
the
new
infla-
tion
pressure.
Refer
to
your
tire
dealer/installer
of
plus
size
tires
for

proper
inflation
pressure.
We
r

ecommend
checking
air
pressure
once
each
month,
and
before
a
long

trip.
Whether
you
have
a
full-sized
or
mini-spare,
make
sure
that
it
is

properly
inflated
as
well.
If
the
TPMS
generates
improper
monitoring
or

signals
we
recommend
that
you
consult
your
owner ’s
manual
provided

with
your
vehicle
and
follow-up
with
your
vehicle’s
manufacturer.
32

The maximum load rating of your tires is molded on the tire sidewall. Do
not exceed this rating. Follow the loading instructions of the manufac-
turer of your vehicle and this will ensure that your tires are not
overloaded. Tires which are loaded beyond their maximum allowable
loads for the particular application will build up excessive heat that may
result in sudden tire destruction.
Do not exceed the gross axle weight rating for any axle on your vehicle.
TRAILER TOWING
If you anticipate towing a trailer, you should visit any BFGoodrich® tire
retailer for advice concerning the correct size tire and pressures. Tire size
and pressures will depend upon the type and size of trailer and hitch
utilized, but in no case must the maximum cold inflation pressure or tire
load rating be exceeded. Check the tire decal and the owner ’s manual
supplied by the manufacturer of your vehicle for further recommenda-
tions on trailer towing.
WHEEL ALIGNMENT AND BALANCING ARE IMPORTANT FOR
SAFETY AND MAXIMUM MILEAGE FROM YOUR TIRES CHECK
HOW YOUR TIRES ARE WEARING AT LEAST ONCE EACH
MONTH
If your tires are wearing unevenly, such as the inside shoulder of the tire
wearing faster than the rest of the tread, or if you detect excessive
vibration, your vehicle may be out of alignment or balance. These
conditions not only shorten the life of your tires but adversely affect the
handling characteristics of your vehicle, which could be dangerous. If
you detect irregular wear or vibration, have your alignment and balance
checked immediately. Tires which have been run underinflated will show
more wear on the shoulders than in the center of the tread.
TIRE MIXING
BFGoodrich® tires are radial tires and for best performance it is recom-
mended that the same size and type of tire be used on all four wheel
positions. Before mixing tires of different types in any configuration on
any vehicle, be sure to check the vehicle manufacturer ’s Owner‘s Manual
for its recommendations.
It is especially important to check the vehicle manufacturer ’s owner ’s
manual when mixing, matching or replacing tires on 4-wheel drive
vehicles, as this may require special precautions.
BFGOODRICH TIRES
37

While
All-Season
tires
are
designed
to
provide
reliable

performance
in
some
inter
conditions,
the
use
of
four

(4)
inter
tires
is
recommended
for
optimum
perfor-
mance.
Tires
designated
for
use
in
severe
inter
condi-
tions
are
marked
on
at
least
one
sidewall
with
the
letter
“M” and “S” plus a pictograph of a mountain with a snowflake on it.
TIRE ROTATION AND REPLACEMENT
To obtain maximum tire wear, it may be necessary to rotate your tires. Refer
to your vehicle owner ’s manual for instructions on tire rotation. If you do
not have an owner‘s manual for your vehicle, BFGoodrich® recommends
rotating your tires every 6,000 to 8,000 miles (10,000 to 12,000 km).
Monthly inspection for tire wear is recommended. Your tires should be
rotated at the first sign of irregular wear, even if it occurs before 6,000
miles (10,000 km). This is true for all vehicles.
When rotating tires with a directional tread pattern, observe the arrows
molded on the sidewall which show the direction the tire should turn.
Care must be taken to maintain the proper turning direction.
Some Tire Pressure Monitoring systems (TPMS) may not recognize that a
tire has been moved to a different position on your vehicle. Make certain
that your TPMS system is reset, if necessary, so as to correctly identify the
location of each tire on your vehicle. Refer to your vehicle owner ’s
manual or your vehicle dealer.
Determine whether rotated tires require tire inflation adjustment as front
and rear position tire pressure may vary according to the vehicle manufac-
turer ’s specification due to the actual load on that wheel position. Some
vehicles may have different sized tires mounted on the front and rear axles,
and these different sized tires have rotation restrictions. Always check the
vehicle owner ’s manual for the proper rotation recommendations.
BFGOODRICH TIRES
BFGOODRICH®
DOES
NOT
RECOMMEND
MIXING
SELF
SUPPORT-
ING
STRUCTURE
(SSS)
TIRES
WITH
NON-SSS
TIRES
OTHER
THAN

THE
TEMPORARY
USE
OF
THE
SPARE
TIRE.
WINTER DRIVING
Ti re s
which
meet
the
Rubber
manufactures
Association
(RMA)
definition

of
snow
tires
are
marked
M/S,
M&S.
On
such
tires,
this
designation
is

molded
into
the
sidewall.
Tires
without
this
notation
are
not
recom-
mended
for
inter
driving.
38

BFGOODRICH TIRES
FULL-SIZESPARE
Full-size
spare
tires
(not
temporary
spares)
of
the
same
size
and
construc-
tion
should
be
used
in
a
five
(5)
tire
rotation.
Always
check
the
inflation

pressure
of
the
full-size
spare
immediately
before
incorporating
it
into

rotation.
Follow
the
vehicle
manufacturer ’s
recommended
pattern
for

rotation,
or
if
not
available,
see
a
qualified
tire
technician.
REPLACEMENT
OF
TWO
(2)


TIRES
It
is
recommended
that
all
four
(4)
tires
are
replaced
at
the
same
time.

However,
whenever
only
two
tires
are
replaced,
the
new
ones
should
be

put
on
the
rear.
The
new
tires,
with
deeper
tread,
may
provide
better
grip

and
water
evacuation
in
wet
driving
conditions.
CUSTOMIZATION OF TIRES, WHEELS, ORSUSPENSION ON
SUVS ANDLIGHT TRUCKS
Due
to
their
size,
weight
and
higher
center
of
gravity,
vehicles
such
as

SUVs
and
light
trucks
do
not
have
the
same
handling
characteristics
as

automobiles.
Because
of
these
differing
characteristics,
failure
to
operate

your
SUV/truck
in
a
proper
and
safe
manner
can
increase
the
likelihood

of
vehicle
rollover.
Modifications
to
your
SUV/truck
tire
size,
tir
e
type,

wheels
or
suspension
can
change
its
handling
characteristics
and
further

increase
the
likelihood
of
vehicle
rollover.
Whether
your
SUV/truck
has

the
original
equipment
configuration
for
tires,
wheels
and
suspension
or

whether
any
of
these
items
have
been
modified,
always
drive
safely,

avoid
sudden,
sharp
turns
or
lane
changes
and
obey
all
traffic
laws.

Failure
to


do
so
may
result
in
loss
of
vehicle
control
leading
to
an
accident

and
serious
injury
or
death.
TIRE
ALTERATIONS
Do
not
make
or
allow
to
be
made
any
alterations
on
your
tires.

Alterations
may
prevent
proper
performance,
leading
to
tire
damage

which
can
result
in
an
accident.
Tires
which
become
unserviceable
due
to

alterations
such
as
truing,
whitewall
inlays,
addition
of
balancing
or

sealant
liquids,
or
the
use
of
tire
dressing
containing
petr

oleum
distillates

are
excluded
from
warranty
coverage.
39

reflect the tire size. The following one to four digits may be used at the
tire manufacturer ’s option as a descriptive code. The last three characters
are numbers identifying the week and year of manufacture. (Example:
“O25” means second week of the year of decade, eg.: 1995, 1985, etc.)
Tires produced after July 2000 have an additional digit to identify a given
decade. For example, 2800 means the tire was produced during the 28th
week of 2000; 0201 during the 2nd week of 2001. If the last digits of your
DOT number contain three numeric characters consult a qualified tire
technician to determine the year and decade of manufacture.
STORAGE
Tires contain waxes and emollients to protect their outer surfaces from
ozone and weather checking. As the tire rolls and flexes, the waxes and
emollients continually migrate to the surface, replenishing this protection
throughout the normal use of the tire. Consequently, when tires sit
outdoors, unused for long periods of time (a month or more) their
surfaces become dry and more susceptible to ozone and weather check-
ing and the casing becomes susceptible to flat spotting.
For this reason, tires should always be stored in a cool, dry, clean,
indoor environment. If storage is for one month or more, eliminate the
weight from the tires by raising the vehicle or by removing the tires
from the vehicle. Failure to store tires in accordance with these
instructions could result in damage to your tires or premature aging of
the tires and sudden tire failure.
When tires are stored, be sure they are placed away from sources of heat
and ozone such as hot pipes and electric generators. Be sure that surfaces
on which tires are stored are clean and free from grease, gasoline or other
substances which could deteriorate the rubber.(Tires exposed to these
materials during storage or driving could be subject to sudden failure.)
FOLLOW THESE MOUNTING RECOMMENDATIONS
Tire changing can be dangerous and must be done by professionally
trained persons using proper tools and procedures as specified by the
Rubber Manufacturers Association (RMA).
Your tires should be mounted on wheels of correct size and type and
which are in good, clean condition. Wheels that are bent, chipped, rusted
(steel wheels) or corroded (alloy wheels) may cause tire damage. The
inside of the tire must be free from foreign material. Have your retailer
check the wheels before mounting new tires. Mismatched tires and rims
BFGOODRICH TIRES
41

can explode during mounting. Also, mismatched tires and rims can result
in dangerous tire failure on the road. If a tire is mounted by error on the
wrong-sized rim, do not remount it on the proper rim - scrap it. It may
have been damaged internally (which is not externally visible) by having
been dangerously stretched and could fail on the highway.
Old valves may leak. When new tubeless tires are mounted, have new
valves of the correct type installed. Tubeless tires must only be
mounted on wheels designed for tubeless tires i.e., wheels which have
safety humps or ledges.
It is recommended that you have your tires and wheels balanced. Tires
and wheels which are not balanced may cause steering difficulties, a
bumpy ride, and irregular tire wear.
Be sure that all your valves have suitable valve caps. The valve cap is
the primary seal against air loss.
SERVICE LIFE FOR PASSENGER CAR AND LIGHT TRUCK
TIRES INCLUDING SPARE TIRES
The following recommendation applies to passenger car and light truck
tires. Tires are composed of various types of material and rubber
compounds, having performance properties essential to the proper
functioning of the tire itself. These component properties evolve over
time. For each tire, this evolution depends upon many factors such as
weather, storage conditions, and conditions of use (load, speed, inflation
pressure, maintenance etc.) to which the tire is subjected throughout its
life. This service-related evolution varies widely so that accurately
predicting the serviceable life of any specific tire in advance is not
possible.
That it is why, in addition to regular inspections and inflation pressure
maintenance by consumers, it is recommended to have passenger car and
light truck tires, including spare tires, inspected regularly by a qualified
tire specialist, such as a tire dealer, who will assess the tire’s suitability for
continued service. Tires which have been in use for 5 years or more
should continue to be inspected by a specialist at least annually.
Consumers are strongly encouraged to be aware not only of their tires’
visual condition and inflation pressure but also of any change in dynamic
performance such as increased air loss, noise or vibration, which could be
an indication that the tires need to be removed from service to prevent
tire failure.
BFGOODRICH TIRES42