2020 BMW MOTORRAD R 1250 RS ESP

To
verify the authorization of
t
he ignition key, the electronic
immobilizer exch
anges
inf
ormation with the ignition
key via the
ring aerial.
This device complies with

Part 15 of the FCC rules.
Operation is subject to the
following two conditions:
(1) This device may not cause
h
armful interference, and
(2) this device
must accept
any interference received,
including interference that
may cause undesired
operation.
Any changes or modifi-
cations not
expressly
approved by the party
responsible for compliance
could void the
user's authority
to operate the equipment. FCC
Approval
Ring aerial
in the ignition
switch Approbation
de la FCC
Antenne annulaire présente
dans le commutateur
d'allumage
Pour vérifier l'autorisation de
la clé de contac
t, le système
d'immobilisation é lectronique
échange des informations

avec la clé de contact via
l'antenne annulaire.
Le présent dispositif est
conforme à la
partie 15 des
règles de la FCC. Son
utilisation est soumise aux
deux conditions suivantes : (1)
Le
dispositi f ne
doit pas produire
d
'interférences nuisibles, et
(2) l
e dispositif doit pouvoir
accepter toutes les
interférences e
xtérieures, y
com
pris celles qui
pourraient
provoquer une
activation inopportune.

été approuvée expressément
par l'organisme responsable
de l'homologation peut
a
nnuler l'autorisation accordée
à l'utilisateur pour utiliser le
dispositif.
To
u
t
e modification qui
n'aurait qui n'aurait pas

Germany
Hiermit
erklärt Huf Hülsbeck &
Fürst GmbH & Co. KG, dass der
Funkanlagentyp HUF5750 der
Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-
Konformitätserklärung ist unter
der folgenden Internetadresse
verfügbar: http://www.huf-
group.com/eudoc
Eesti
Käesolevaga deklareerib Huf
Hülsbeck & Fürst GmbH & Co. KG,
et käesolev
raadioseadme tüüp
HUF5750 vastab direktiivi
2014/53/EL nõuetele. EL i
vastavusdeklaratsiooni täielik
tekst on kättesaadav järgmisel
internetiaadressil:
http://www.huf-group.com/eudoc
English
Hereby, Huf Hülsbeck & Fürst

GmbH & Co. KG d eclares that the
radio equipment type HUF5750 is
in compliance with Directive
2014/53/EU. T
he full text of the
EU declaration of conformity is
available at the following internet
address: http:// www.huf-
group.com/eudoc Español
Por
la presente, Huf Hülsbeck &
Fürst GmbH & Co.
KG declara que
el tipo de equipo radioeléctrico
HUF5750 es conforme con la
Directiva 2014/53/UE.

El texto completo de la
declaración UE de conformidad
está disponible en
la dirección
Internet siguiente: http://www.huf-
group.com/eudoc
Français
Le soussigné, Huf
Hülsbeck &
Fürst GmbH & Co. KG, déclare
que l'équipement radioélectrique
du type
HUF5750 est conforme à
la directive 2014/53/UE.
Le texte complet de la déclaration
UE de conformité est disponible à
l'adresse internet suivante: http://
www.huf-group.com/eudoc
Hrvatski
Huf Hülsbeck & Fürst GmbH & Co.
KG ovime iz javljuje da je radijska
oprema
tipa HUF5750 u skladu s
Direktivom 2014/53/EU.
Cjeloviti tekst EU izjave o
sukladnosti dostupan je na

sljedećoj internetskoj adresi:
http://www.huf-group.com/eudoc

Certifications
BMW Keyless Ride ID Device
USA, Canada:
Product na
me: BMW
Keyless Ride ID
Device FCC ID: YGOHUF5750
IC: 4008C -HUF5750
Canada:
Operation
is subject to t
he following two conditions:
(1 )
This
d evice

may not cause harmful
interference,
and
(2) this d
evice must accept any interference received, including
interference that may cause undesired operation. Any chang
es
or modifications
not expressly approv
ed by the
party responsible
for
compliance could void the user’s

authority to operate the equipment.

Declaration Of
Conformity
We declare under our responsibility that the product
BMW Keyless
Ride ID Device (Mo del: HUF5750)
camplies
with the appropriate essential requirements of the article 3
of the R&TIE and the other relevant provisions, when used for its
intended purpose. Applied Standards:
1. Health
and safety requirements contained in article 3 (1) a)
• EN 60950-1:2006+A11:2009+A1:2010+A12:2011;
Information technology equipment-S afety
2. Protection requirements
with respect to electromagnetic
compatibility article 3 (1) b)
• EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic
compatibility and radio spectrum matters (ERM);
Electromagnetic compatibility (EMC) standard for radio
equipment and services;
Part
1: Common technical requirements
• EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic
compatibility and radio spectrum matters (ERM);
Electromagnetic compatibility (EMC) standard for radio
equipment and services; Part 3: Specific conditions for short
range devices (SRD) operating on frequencies between 9 kHz
and 40 GHz
3. Means of the efficient use
of the radio frequency spectrum
article 3 (2)
• EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic
compatibility an
d radio spectrum matters (ERM); Short range
devices (SRD); Radio equipment tobe used in the 25 MHz to
1
000 MHz frequency range with power Ieveis ranging up to
500 mW;
Part 1: Technical characteristics an
d test methods.
Part 2: Harmonized EN covering essential requirements under
article 3.2 ofthe R&TIE directive

Certification
Tire Pressure
C
ontrol (TPC)
This device
complies with P art 15
of the FCC Rules and with
Industry Canada license-e xempt
RSS s tandard(s).
Operation i s
subject to the
following two conditions:
(1) This device may not cause
harmful interference, and
(2) This device must accept any
interference received,
including interference that
may cause
undesired
operation. Le présent appareil

est conforme
aux CNR
d'Industrie Canada
a
pplicables aux ap pareils radio
e
xempts de licence. L'exploitation
est autorisée aux deux conditions
suivantes:
(1) l'appareil
ne doit pas produire
d e brouillage, et
(2) l'utilisateur de l'appareil doit
accepter tout brouillage
radioélectrique
subi, même si
l
e brouillage est susceptible
d'en compromettre
le
fonctionnement.
WARNING: Changes
or
modifications not expressively
approved by the party responsible
for compliance could void the
user's authority to operate the
equipment. The term “IC:” before

the radio certification number only
signifies that Industry Canada
technical specifications were met. FCC ID:

MRXBC5A4
I C: 2546A-B
C5A4 FCC ID:
MRXBC54MA4
IC: 2546A-B C54MA4
WARNING: Ch
anges or
modifications not expressively
approved by the party responsible
for compliance could void the
user's authority to operate the
equipment.
The term “IC:” before
the radio certification number only
signifies that Industry Canada
technical specifications were met.

Declaration of
Conformity
Radio e
quipment T FT instrument
cluster
For a
ll Countries without EU
Technical information
BT
operating frq. Range:
2402 – 2480 MHz
BT
version: 4.2 (no BTLE)
BT output power: < 4 dBm
WLAN operating frq. Range::
2412 – 2462 M
Hz
WLAN standards:
IEEE 802.11 b/g/n

WLAN output power: < 20 dBm
Manufacturer
and Address
Manufacturer:
Robert Bosch Car Multimedia
GmbH
Adress: Robert Bosch Str. 200,
31139 Hildesheim, GERMANY
Turkey
Robert Bosch Car Multimedia
GmbH,
ICC6.5in tipi telsiz
sisteminin 2014/53/EU
nolu yönetmeliğe uygun olduğunu
beyan eder. AB Uygunluk
Beyanı'nın tam metni, aşağıdaki
internet adresinden
görülebilir:
http://cert.bosch-
carmultimedia.net Brazil
Este
equipamento
opera em
caráter secundário, isto é, não
tem d ireito a proteção contra
interferência prejudicial, mesmo
de estações do mesmo tipo, e
não pode causar interferência a
siste mas operando em caráter
primário.
Canada
This
d
evice
complies with Industry
Canada’s
licence-exempt RSSs
and part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
(1) this device may not cause
interference, a
nd
(2) this device must accept any
i
nterference, including
interference that may cause
undesired operation o
f the device.
Changes
or modifications not
expressly ap proved by the party
responsible for compliance could
void the user's authority to
operate the equipment.

Thailand
เครื่องโทรคมนาคมและอุปกรณ์
น้ี
มีความสอดคล้องตามข้อกําหนดของ กทช.
(This telecommunication

equip ments is in compliance with
NTC
requirements)
United States (USA)
This device complie s
with
Industry Canada’s licence-exempt
RSSs and part 15 of the FCC
Rules. Operation is subject to the
following two conditions:
(1) this device may not
cause
interference, and
(2) this device must accept any
interference, including
interference that may cause
undesired operation o
f the dev ice.
Changes
or modifications not
expressly ap proved by the party
responsible for compliance could
void the user's authority to
operate the equipment.
Le présent
appareil est conforme
aux CNR d'Industrie Canada
applicables aux appareils radio
exempts de licence. L'exploitation
est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2)
l'appareil doit accepter tout
brouillage radioélectrique subi,
même si le brouillage est
susceptible d'en compromettre le
fonctionnement.