2020 Acura MDX HYBRID light

[x] Cancel search: light

Page 562 of 685

Acura MDX HYBRID 2020  Owners Manual 561
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 562
Safety When Performing Maintenance ..563
Parts and Fluids Used in Mai

Page 563 of 685

Acura MDX HYBRID 2020  Owners Manual 562
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle 
in good condition. If you become aware of

Page 571 of 685

Acura MDX HYBRID 2020  Owners Manual 570
uuMaintenance Under the Hood uOpening the Hood
Maintenance
Opening the Hood
1. Park the vehicle on a level surface, and set 
the parking brake.
2. Pull the hood release handle under the 
driver’

Page 577 of 685

Acura MDX HYBRID 2020  Owners Manual uuMaintenance Under the Hood uChanging the Engine Oil and Oil Filter
576
Maintenance
4. Remove the oil filter and dispose of the 
remaining oil.
5. Check that the filter ga sket is not stuck to 
the e

Page 583 of 685

Acura MDX HYBRID 2020  Owners Manual 582
Maintenance
Replacing Light Bulbs
Headlights
Headlights are LED type. Have an authorized Acura dealer inspect and replace the 
light assembly.
Front Turn Signal/Parkin g, Daytime Running and 
Fron

Page 584 of 685

Acura MDX HYBRID 2020  Owners Manual 583
uuReplacing Light Bulbs uBrake Light and Rear Turn Signal Light Bulbs
Continued
Maintenance
Brake Light and Rear Turn Signal Light Bulbs
When replacing, use the following bulbs.
1.Remove the cover

Page 585 of 685

Acura MDX HYBRID 2020  Owners Manual 584
uuReplacing Light Bulbs uTaillights/Rear Side Marker Lights
Maintenance
4. Turn the socket counter-clockwise and 
remove it. Remove the old bulb.
5. Insert a new bulb.
6. Slide the light assembly

Page 586 of 685

Acura MDX HYBRID 2020  Owners Manual 585
uuReplacing Light Bulbs uBack-Up Light Bulbs
Maintenance
Back-Up Light Bulbs
When replacing, use the following bulbs.
1.Remove the cover by prying on the edge 
using a flat-tip screwdriver.
u Wrap