2020 Abarth Punto ECO mode

INTRODUCTION
This chapter describes the variants regarding the
operation of the CD player only: as far as the operation
of the radio is concerned, refer to the description in the
“Functions and Adjustments” chapter.
CD PLAYER
RADIO
248
CD PLAYER SELECTION
To activate the CD player built into the equipment,
proceed as follows:
❒load a CD with the equipment switched on: the first
track will start to play;
or
❒if a CD has already been loaded, turn on the car
radio and then briefly press the CD button to select
the “CD” function mode: the last track listened to
will start to play.
It is advisable to use original CDs to ensure optimal
playback. If CD-R/RWs are used, we recommend using
good quality media that are burned at the slowest speed
possible.
221-258 PUNTO Abarth GB 1ed 17-07-2012 13:28 Pagina 248

CD LOADING/EJECTION
To load the CD, insert it gently into the slot to activate
the motorised loading system, which will position it
correctly.
The CD can be loaded with radio off and the ignition key
turned to MAR: in this case the radio will remain off.
When the radio is turned on, the last source listened to
before being switched off will be activated.
When a CD is inserted the display will show the symbol
“CD-IN” and the text “CD Reading”. They will remain
displayed for the whole time required for the radio to
read the CD. When this time has elapsed the radio
automatically starts playing the first track.
Press the ˚button (EJECT) with the radio on to activate
the motorised ejection of the CD. After ejection, the last
audio source listened to before playing the CD will be
heard.
If the CD is not removed from the radio, it will
automatically be reloaded about 20 seconds later and the
Tuner mode will be tuned into (Radio).
The CD cannot be ejected if the radio is off.
If the ejected CD is reloaded without having removed it
completely from the slot, the radio will not switch to the
CD source.
RADIO
249
Possible error messages
If the loaded CD cannot be read (e.g. a CD ROM has
been inserted or the CD is inserted the wrong way
round or there is reading error) the display shows the
text “CD Disc error”.
The CD will then be ejected and the audio source
activated before the CD mode selection will be heard.
With external audio source on (“TA”, “ALARM” and
“Phone”) the CD which cannot be read will not be
ejected until these functions are terminated. At the end,
with the CD mode activated, the display will show the
text “CD Disc error” for a few seconds and then the
CD will be ejected.
If the CD player overheats the CD playing could be
temporarily interrupted. The radio will automatically
turn to the Radio (Tuner) mode and the display will
show “CD hot” and then “CD disc error”.
221-258 PUNTO Abarth GB 1ed 17-07-2012 13:28 Pagina 249

RADIO
251
MP3 CD PLAYER
INTRODUCTION
This chapter only describes the variants regarding the
operation of the CD MP3 player: as far as the operation
of the radio is concerned, refer to the description in
chapters “Radio” and “MP3 CD Player”.
NOTE MPEG Layer-3 audio decoding technology
licensed from Fraunhofer IIS and Thomson multimedia.
MP3 MODE
In addition to playing regular audio CDs, the radio is also
able to play CD-ROMs on which audio files have been
recorded using the MP3 compression format. The radio
functions as described in the “CD Player” chapter when
an ordinary audio CD is inserted.
The use of good quality media burned at the slowest
possible speeds is recommended for optimum quality.
The files on an MP3 CD are structured in folders that
create lists of all the folders containing MP3 tracks
(folders or subfolders are all displayed on the same
level); the folders that do not contain MP3 tracks cannot
be selected.The specifications and operating conditions for playing
MP3 files are the following:
❒the CD-ROMs used should be mastered in
accordance with the ISO 9660 standard;
❒the music files should have the extension “.mp3”: files
with a different extension will not be reproduced;
❒The sampling frequencies that can be reproduced are:
44.1 kHz, stereo (from 96 to 320 kbit/s) – 22.05 kHz,
mono or stereo (from 32 to 80 kbit/s);
❒tracks with a variable bit-rate can be reproduced.
IMPORTANT The track names must not include the
following characters: spaces, ‘ (apostrophes), ( and )
(open and close brackets). During the mastering of a
MP3 CD, make sure that the names of the files do not
contain these characters; if not, the radio will not be able
to play the tracks involved.
SELECTING MP3 SESSIONS ON HYBRID
DISCS
If a hybrid disc is inserted (Mixed Mode, Enhanced, CD-
Extra) also containing MP3 files, the radio automatically
starts playing the audio session. It is possible to move to
the MP3 session whilst playing by keeping the MEDIA
button pressed for more than 2 seconds.
221-258 PUNTO Abarth GB 1ed 17-07-2012 13:28 Pagina 251

TROUBLESHOOTING
RADIO
254
GENERAL
Sound volume low
The Fader function should be adjusted only to the values
“F” (front) to prevent a reduction in radio output power
and the cancellation of the volume if the Fader level
adjustment is equal to R+9.
Source cannot be selected.
Nothing has been loaded. Load the CD or the MP3 CD
to be listened to.
CD PLAYER
The CD does not play.
The CD is dirty. Clean the CD.
The CD is scratched. Try using another CD.
The CD cannot be loaded.
A CD is already loaded. Press the button ˚
and
remove the CD.MP3 FILE READING
Tracks skip during MP3file playback
The CD is scratched or dirty. Clean the CD, referring to
the description in the paragraph “CD” in the chapter
“PRESENTATION”.
The duration of the MP3 tracks is not shown
correctly
In some cases (due to the recording mode) the duration
of the MP3 tracks may be displayed incorrectly.
221-258 PUNTO Abarth GB 1ed 17-07-2012 13:28 Pagina 254