2020.25 OPEL VIVARO C ESP

46Keys, doors and windowsTo reduce sunlight at the second rowseats, pull the blind upwards using
the grip and engage it at the top of the door frame.Roof
Glass panel
Sunblinds
The sunblinds are operated manually. Slide the respective sunblind to thedesired position.

Seats, restraints53Activate seat heating by turning the
thumb wheel " for the respective
front seat. There are three intensity
levels of heating.
To deactivate the seat heating turn
the thumb wheel " to 0.
Prolonged use of the highest setting
for people with sensitive skin is not
recommended.
Seat heating is operational when engine is running and during an
Autostop.
Stop-start system 3 157.
MassageActivate the back massage function
by pressing K. The LED in the button
illuminates to indicate activation.
The massage function is activated for
a period of 1 hour. During this time,
massage is performed in six cycles
with breaks in between.
To adjust the intensity of the massage press L. Two levels of massage are
available.
Pressing K once more deactivates
massage function. The LED goes off.
The massage function is operational
when engine is running and during an Autostop.
Stop-start system 3 157.Rear seats9 Warning
When seats are being adjusted or
folded, keep hands and feet away
from the moving area. Risk of
injury.
Ensure that there are no objects
on the anchor points or rails.
Never adjust seats while driving as they could move uncontrollably.
Drive only with engaged seats and
backrests.
Depending on version the levers of
the seats can be located at different
places. The illustrations show
examples.
Seat backrest
Folding backrest down to table
position
1. Push the head restraint down or remove it before folding the
backrest.
Head restraints 3 47.

Seats, restraints55
3. Release each front mount bypulling the respective lever.
4. Remove the seat.
Installing
1. Engage front mounts in the anchorages.
2. Push the levers to lock the frontmounts and tilt the seat back until
it is engaged.
3. Unfold the backrest.
Rear seats on rails The single seats as well as the seat
bench seat can be moved individually forwards and backwards. The
backrest of the seat bench is splitted.
Backrest inclination
Pull the front lever or push the rear
lever to release and adjust the
backrest.
Release the lever when the desired
position is obtained.

58Seats, restraintsSeat belts are designed to be used byonly one person at a time.
Child restraint system 3 67.
Periodically check all parts of the belt system for damage, soiling and
proper functionality.
Have damaged components
replaced. After an accident, have the
belts and triggered belt pretensioners
replaced by a workshop.
Note
Make sure that the belts are not
damaged by shoes or sharp-edged
objects or trapped. Prevent dirt from getting into the belt retractors.
Seat belt reminder
Each seat is equipped with a seat belt reminder, indicated by a control
indicator a for the respective seat in
the instrument cluster and in the
overhead console.
Seat belt reminder 3 110.
Belt force limiters
Stress on the body is reduced by the
gradual release of the belt during a
collision.Belt pretensioners
In the event of a head-on, rear-end or
side-on collision of a certain severity,
the single front seat belts and the seat belt of the outer front bench seat are
tightened by seat belt pretensioners.9 Warning
Incorrect handling (e.g. removal or
fitting of belts) can trigger the belt
pretensioners.
Deployment of the belt pretensioners
is indicated by continuous illumination
of control indicator d.
Airbag and belt tensioners 3 111.
Triggered belt pretensioners must be
replaced by a workshop. Belt
pretensioners can only be triggered
once.
Note
Do not affix or install accessories or
other objects that may interfere with
the operation of the belt
pretensioners. Do not make any
modifications to belt pretensioner components as this will invalidate
the operating permit of your vehicle.
Three-point seat belt
Fasten
Withdraw the belt from the retractor,
guide it untwisted across the body
and insert the latch plate into the
buckle. Tighten the lap belt regularly
whilst driving by pulling the shoulder
belt.

72Seats, restraints2:adjust seat backrest inclination as far as necessary to a vertical position to ensure that the belt is tight on the buckle
side3:move the respective seat ahead of the child restraint system forwards as far as necessary and adjust its backrest
inclination as far as necessary to a vertical position4:adjust the respective headrest as necessary or remove if required5:single seats: with a child seat installed on the centre seat, usage of outer seats is not allowed6:fixed seat bench; folding seat bench is in process of being approved

76Seats, restraints
Weight classSize class
On seats in the third rowFixed rear seat and
bench seatFixed one-piece
bench seat1/3 - 2/3 bench seats
on railsSingle seats on rails 5Group 0: up to 10 kgF
GX
XX
XIL 1,2,3
IL 1,2,3X
XGroup 0+: up to 13 kgCXXXIL 3DXXIL3IL3EXXIL3ILGroup I: 9 to 18 kgCXXXIL3DXXIL3IL3AIUF, IL 4,5XIUF, IL4IUF, IL 4BIUF, IL4,5XIUF, IL4IUF, IL 4B1IUF, IL4,5XIUF, IL4IUF, IL 4IL:suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories.
The ISOFIX restraint system must be approved for the specific vehicle type (refer to the vehicle type list of the child restraint system)IUF:suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this weight classX:no ISOFIX child restraint system approved in this weight class1:with a child seat installed usage of one or more seats in the same row may not be allowed2:installation possible only behind the driver's seat3:move the respective front seat ahead of the child restraint system forwards as far as necessary

Seats, restraints774:adjust the respective headrest as necessary or remove if required5:with a child seat installed on the centre seat, usage of outer seats is not allowed6:fixed seat bench; folding seat bench is in process of being approved
ISOFIX size class and seat device
A – ISO/F3:forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kgB – ISO/F2:forward-facing child restraint system for smaller children in the weight class 9 to 18 kgB1 – ISO/F2X:forward-facing child restraint system for smaller children in the weight class 9 to 18 kgC – ISO/R3:rear-facing child restraint system for children of maximum size in the weight class up to 18 kgD – ISO/R2:rear-facing child restraint system for smaller children in the weight class up to 18 kgE – ISO/R1:rear-facing child restraint system for young children in the weight class up to 13 kgF– ISO/L1:left lateral facing position child restraint system (carry-cot)G – ISO/L2:right lateral facing position child restraint system (carry-cot)

Storage81Load compartment
Depending on version, the load
compartment area can be increased
by folding up or removing the seats in
the second and third row.
Vehicle version with seat benches
in second and third row
When loading the following has to be
observed:
● Only store objects on seats of the
third row folded down to the table
position, when the seats in the
second row are also folded down to the table position.
● Bench seat in the second or third
row in the tilted position: the outerseat must not be occupied.
● Single bench seat in the second or third row in the tilted position:
the center seat must not be
occupied.
● Seat in the second row folded down to the table position:
respective seat in the third row must not be occupied.
● Seat in the second row in the tilted position: respective seat inthe third row must not be
occupied.
Folding the passenger seat 3 51.
Folding or removing the rear seats
3 53.
Load compartment cover Do not place any objects on the cover.
Raise the load compartment cover to
remove it.
To install the load compartment cover
insert it in the retainers on both sides.