Cleaning the air filter case check hoses ................................................ 8-44
Cleaning the spark arrester ................ 8-45
Valve clearance .................................. 8-47
Brakes ................................................ 8-47
Checking the front and rear brake pads.................................................. 8-47
Checking the parking brake pads ...... 8-48
Checking the brake and YCC-S
clutch fluid levels .............................. 8-48
Brake and YCC-S clutch fluid
replacement...................................... 8-50
YCC-S clutch ..................................... 8-50
Checking the brake pedal .................. 8-51
Checking the accelerator pedal ......... 8-51
Parking brake lever free play adjustment........................................ 8-52
Brake light switch ............................... 8-53
Cable inspection and lubrication........ 8-53
Pedal lubrication................................. 8-54
Checking the stabilizer bushes .......... 8-54
Upper and lower arm pivot lubrication (left and right) .................. 8-55 Rear knuckle upper and lower pivot
lubrication (left and right) ..................8-56
Drive shaft universal joint lubrication .........................................8-56
Steering shaft lubrication....................8-56
Wheel removal ....................................8-57
Checking and tightening the bead lock (for SE/LE models) ....................8-57
Tire replacement .................................8-58
Wheel installation................................8-59
Battery ................................................8-59
Jump-starting .....................................8-63
Fuse replacement ...............................8-64
Headlights...........................................8-67
Headlight beam adjustment ...............8-67
Brake/tail light .....................................8-68
Interior lights (for LE models) ..............8-68
Troubleshooting ..................................8-68
Troubleshooting charts .......................8-70
CLEANING AND STORAGE ....................9-1 Cleaning................................................9-1
Storage .................................................9-2
UB5H7AE0.book Page 3 Wednesday, July 4, 2018 1:37 PM
8-64
8
6. Start the engine. (See page 6-2.)
7. After the engine starts, disconnect thenegative lead of the jumper cable from
the seat frame and charged battery, and
then disconnect the positive lead of the
jumper cable from the charged battery
and the battery in the YXZ1000R.
8. Install the seat cushion and the panel.
EBU35255Fuse replacementThe main fuse, the fuel injection system fuse,
the EPS fuse, and the fuse box are located
under panel A. (See page 8-11.)
1. Jumper cable negative lead
1
1. Main fuse
2. EPS fuse
3. Fuse box
4. Fuel injection system fuse
5. Fuel injection system spare fuse
5
4
3
21
UB5H7AE0.book Page 64 Wednesday, July 4, 2018 1:37 PM
