POWER* FRONT SEATS
Use the controls on the outside of the seat to adjust e.g. seat position and lumbar support *. The two controls that together form the shape of
a seat are used to adjust the seat position. The third, the four-way con-trol *, is used to adjust lumbar support.
The seat-shaped controls Use the lower section of the control to adjust the height of the seat cushion or move the entire seat. Use the rear section of the control toadjust backrest tilt. Four-way button *
Adjust the lumbar support * by pressing the four-way control.
–Press up or down to move the lumbar support upward or downward.
–Press the front or rear part of the four-way control to increase or decrease the lumbar support. Storing positions
1. Adjust the seat and the door mirrors to the desired positions and
press the M button in the door panel. The indicator light in the button
will illuminate.
2. Press and hold down memory button 1 or 2 within three seconds. An
audible signal will sound and the indicator light in the M button will
go out.
To use your stored position: With door open - press one of the memory buttons and release.With door closed - press and hold one of the memory buttons until the seat reaches the stored position.
02
