2019 TOYOTA YARIS wheel torque

2322
OVERVIEW
FEATURES & OPERATIONS
SAFETY
& EMERGENCY FEATURES
SAFETY & EMERGENCY FEATURES
Spare tire & tools
Spare tire
Flat tire belt
Spare tire hold-down bolt
Lug wrench
Tool bag
Jack
Jack lever
Jack point attachment
Tiedown eyelet(if equipped)
(1) Loosen the spare tire hold-down bolt.
(2) Turn the wing bolt and jack screw counterclockwise.
Refer to the Owner’s Manual for jack positioning and tire changing pr\
ocedures.
Wing boltJack screw
(1)(2)
REMOVING THE JACK AND SPARE TIRE
Safety System
Your vehicle comes standard with a Safety System, which combines Anti-lo\
ck Brake
System (ABS), Brake Assist (BA), Brake Over-Ride System (BOS), Dyn\
amic Stability
Control (DSC), Electronic Brake-force Distribution (EBD) and Tractio\
n Control System
(TCS). Thus, your vehicle is equipped with safety systems similar to e\
ach of those that
together comprise Toyota’s Star Safety System.
Refer to the Owner’s Manual for more details and important informatio\
n on limitations
to these systems.
DSC automatically controls braking and engine torque in conjunction with\
systems such
as ABS and TCS to help control side slip when driving on slippery surfac\
es, or during
sudden or evasive maneuvering, enhancing vehicle safety.
DYNAMIC STABILITY CONTROL (DSC)
ABS control unit continuously monitors the speed of each wheel. If one w\
heel is about
to lock up, the ABS responds by automatically releasing and reapplying t\
hat wheel’s
brake.
ANTI-LOCK BRAKE SYSTEM (ABS)
During emergency braking situations when it is necessary to depress the \
brake pedal
with greater force, the brake assist system provides braking assistance,\
thus enhancing
braking performance.
When the brake pedal is depressed hard or depressed more quickly than fo\
r non-
emergency stops, the system applies the brakes more firmly.
BRAKE ASSIST (BA)
EBD makes it easier to maintain vehicle control and shortens the stoppin\
g distance
when there is a large load on the rear wheels, such as when the car is c\
arrying a full
load of passengers. EBD optimally distributes the braking power between \
the front and
rear wheels depending on the load in order to increase the effectiveness\
of the rear-
wheel braking and minimize the difference in stopping distance between w\
hen the car
is fully loaded and when it is not.
ELECTRONIC BRAKE-FORCE DISTRIBUTION (EBD)
Brake Over-ride System automatically reduces driving torque when the acc\
elerator and
brake pedals are pressed simultaneously under certain conditions.
BOS doesn’t engage if the brake pedal is depressed before the acceler\
ator pedal,
allowing vehicles to start on a steep hill and safely accelerate without\
rolling backward.
BRAKE OVER-RIDE SYSTEM (BOS)
TOOL AND SPARE TIRE LOCATION

2524
OVERVIEW
FEATURES & OPERATIONS
SAFETY
& EMERGENCY FEATURES
SAFETY & EMERGENCY FEATURES
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each\
vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep\
the mat in
place.
• Install floor mats right side up.
TCS enhances traction and safety by controlling engine torque and brakin\
g. When the
TCS detects driving wheel slippage, it lowers engine torque and operates\
the
brakes to prevent loss of traction.
This means that on a slick surface, the engine adjusts automatically to \
provide optimum
power to the drive wheels, limiting wheel spin and loss of traction.
TRACTION CONTROL SYSTEM (TCS)