1
* Visit your Toyota dealer for information on customizing this feature.
Yaris Sedan
2019
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and
supplementary manuals so you will have a better understanding
of your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor North
America, Inc. wish you many years of satisfied driving in your
new Yaris Sedan.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Yaris Sedan oper\
ations.
Every Yaris Sedan owner should review the Owner’s Manual that accompa\
nies
this vehicle.
Pay special attention to the boxed information highlighted in color throughout
the Owner’s Manual. Each box contains safe operating instructions to \
help you
avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of \
printing.
Toyota reserves the right to make changes at any time without notice.
INDEX
Engine maintenance 7Fuel tank door release and cap 8Hood release 8Indicator symbols 4-5Instrument cluster 4Instrument panel 2-3Keyless entry* 6Smart Key system 7Trip information/ Instrument panel light control 8
OVERVIEW
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
PAIRING BLUETOOTH® PHONEFOR THE FIRST TIME 26-27
Air conditioning/heating 14Audio/navigation 17Automatic transmission 9AUX port/USB media port 17Bottle holders/cup holders 9Cruise control 15Door locks 13Drive selection 19 Lights & turn signals 11Manual transmission 9Parking brake 13Power outlet 16Rear view monitor system 18Seat-Folding down rear seat 10Seat adjustments-Front 10Seat heaters 15 Seats-Head restraints 10 Low-Speed Pre-Collision System (Smart City Brake Support) 19Steering wheel switches 16TCS (Traction Control System)/DSC (Dynamic Stability Control) OFF switch 18Tilt & telescopic steering wheel 16Windows-Power 13Windshield wipers & washers 12
Floor mat installation 24Rear door child safety locks 20Safety System 23-24Seat belts 21Seat belts-Shoulder belt anchor 20Spare tire & tools 22Tire Pressure Monitoring(warning) System (TPMS) 21
OVERVIEW
FEATURES & OPERATIONS
SAFETY
& EMERGENCY FEATURES
32
OVERVIEW
FEATURES & OPERATIONS
SAFETY
& EMERGENCY FEATURES
OVERVIEW
Instrument panel
Steering wheel controls
Headlight and turn signals controls
Instrument cluster
Trunk release button
Remote fuel-filler lid release
Audio and navigation1 system
Emergency flasher switch
Dashboard illumination knob
Air conditioning controls
Seat warmer switches1
“SPORT” mode switch1
12V DC power outlet and AUX port/USB media port
Windshield wiper and washer controls
“ENGINE START STOP” button
Hood release lever
Tilt and telescopic steering lock release lever
Dynamic Stability Control (DSC) OFF switch
Low-Speed Pre-Collision System (Smart City Brake Support) OFF switch
Tire Pressure Monitoring (warning) System (TPMS) set switch
Audio control and telephone switchesCruise control switches
1 If equipped.
2120
OVERVIEW
FEATURES & OPERATIONS
SAFETY
& EMERGENCY FEATURES
SAFETY & EMERGENCY FEATURES
Rear door child safety locks
Seat belts-Shoulder belt anchor
Moving the lever to the lock position will allow the door to be opened o\
nly from the
outside.
Rear door
Unlock
Lock
Push up to raisePush lock release to lower
Seat belts
Tire Pressure Monitoring (warning) System (TPMS)
NOTE: If a passenger’s seat belt is fully extended, then retracted ev\
en slightly,
the Automatic locking retractor (ALR) will prevent it from being re-ex\
tended
beyond that point, unless fully retracted again. This feature is used to\
help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint system,
refer to the Owner’s Manual.
Keep as low on hips as possible
Take up slack
Too high
If tire pressure indicator is on, check/adjust each tire.
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn the
ignition switch to “ON” and press and hold the “SET” button until indicator blinks twice
and a beep sound once. Let the vehicle sit for a few minutes to allow in\
itialization to
complete.
Refer to the load label on the door jamb or the Owner’s Manual for ti\
re inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then\
remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been in\
itialized
recently, setting the tire pressures to factory specifications should tu\
rn off the
light.
