2019 TOYOTA YARIS HATCHBACK low beam

1102. Instrument cluster
YARIS_F_OM_Europe_OM52A54E
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*1, 4Brake system warning
light ( P. 581)
*1Electric power steering
system warning light
( P. 582)
*1, 8
Charging system warn-
ing light ( P. 581)
*1, 2, 5
PCS warning light
( P. 583)
*9, 10
Charging system warn-
ing light ( P. 581)
*1, 2, 4
Slip indicator
( P. 583)
*1, 8
Low engine oil pressure
warning light ( P. 581)
*2, 8
(Yellow)
Automatic High Beam
indicator ( P. 584)
*9, 10Low engine oil pressure
warning light ( P. 581)
*2, 8
(Yellow)
Cruise control indicator
( P. 584)
*1, 8
(Red)
High engine coolant
temperature warning
light ( P. 582)
*2, 8
(Yellow)
LDA indicator
( P. 584)
*9, 10High engine coolant
temperature warning
light ( P. 582)
*2, 7, 8
(Yellow)
Lane marker indicators
( P. 584)
*1
Malfunction indicator
lamp ( P. 582)
*8
(Yellow)
Speed limiter indicator
( P. 584)
*1SRS warning light
( P. 582)
*1, 2, 5
Stop & Start cancel indi-
cator ( P. 584)
*1, 4ABS warning light
( P. 582)
*2, 3, 8
(Yellow)
Smart entry & start sys-
tem indicator
( P. 584)

1122. Instrument cluster
YARIS_F_OM_Europe_OM52A54E
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
( P. 264)
*4
“SPORT” indicator
( P. 253)
Headlight high beam
indicator ( P. 267)
*1, 6, 12
Gear Shift Indicator
( P. 262)
*2
(Green)
Automatic High Beam
indicator ( P. 314)
*1, 6, 13
Gear Shift Indicator
( P. 262)
Tail light indicator
( P. 266)
*2
(Green)
Cruise control indicator
( P. 325)
*2Front fog light indicator
( P. 271)
*2
“SET” indicator
( P. 325)
Rear fog light indicator
( P. 271)
*2
(Green)
LDA indicator
( P. 308)
*2, 12
(Green)
Smart entry & start sys-
tem indicator
( P. 243)
*2, 11, 12
(Green)
Lane marker indicators
( P. 309)
*3, 12
(Blue)
Low engine coolant tem-
perature indicator
( P. 579)
*2
(Green)
Speed limiter indicator
( P. 329)
*1, 2Stop & Start indicator
( P. 344)
*2, 7, 10, 12PCS activation indicator
( P. 290)
*1, 4, 5Eco Driving Indicator
Light ( P. 114)
*1, 2
Stop & Start cancel indi-
cator ( P. 345)

2674-3. Operating the lights and wipers
4
Driving
YARIS_F_OM_Europe_OM52A54E
With the headlights on, push
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams wi th the headlights on or off.
This system allows the low beam headlights to be turned on for 30
seconds when the engine switch is turned off.
Pull the lever toward you and
release it with the light switch is in
or after turning the
engine switch off.
Pull the lever toward you and
release it again to turn off the
lights.
Turning on the high beam headlights
1
2
Follow me home system (if equipped)

2704-3. Operating the lights and wipers
YARIS_F_OM_Europe_OM52A54E
■ Automatic High Beam (if equipped)
 P. 314
■ Light reminder buzzer
Vehicles without a smart entry & start system
A buzzer sounds when the key is removed from the engine switch and the
driver’s door is opened while the lights are turned on.
Vehicles with a smart entry & start system
A buzzer sounds when the engine switch is turned off and the driver’s door is
opened while the lights are turned on.
■ Battery-saving function
In all conditions following below, the headlights and the other remaining lights
will go off automatically after 20 minutes in order to prevent the vehicle bat-
tery from being discharged:
● The headlights and/or tail lights are on.
● The light switch is in or .
● Vehicles without a smart entry & start system: The engine switch is turned to
the “LOCK” position.
● Vehicles with a smart entry & start system: The engine switch is turned off.
This function will be canceled in any of the following situations:
● Vehicles without a smart entry & start system: When the engine switch is
turned to the “ON” position.
● Vehicles with a smart entry & start system: When the engine switch is turned
to IGNITION ON mode.
● When the light switch is operated.
● When the door is opened or closed.
■ Customization
Settings (e.g. light sensor sensitivity) can be changed.
(Customizable features: P. 666)
NOTICE
■To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not
running.

2824-5. Toyota Safety Sense
YARIS_F_OM_Europe_OM52A54E
Toyota Safety Sense
◆PCS (Pre-Crash Safety system)
 P. 2 9 0
◆LDA (Lane Departure Alert)
 P. 3 0 7
◆Automatic High Beam
 P. 3 1 4
◆Road Sign Assist
 P. 3 1 9
: If equipped
The Toyota Safety Sense consists of the following drive assist
systems and contributes to a safe and comfortable driving expe-
rience:
WARNING
■ Toyota Safety Sense
The Toyota Safety Sense is designed to operate under the assumption that
the driver will drive safely, and is designed to help reduce the impact to the
occupants and the vehicle in the case of a collision or assist the driver in
normal driving conditions.
As there is a limit to the degree of recognition accuracy and control perfor-
mance that this system can provide, do not overly rely on this system. The
driver is always responsible for paying attention to the vehicle’s surround-
ings and driving safely.

3154-5. Toyota Safety Sense
4
Driving
YARIS_F_OM_Europe_OM52A54E
When all of the following conditions are fulfilled, high beam will be
automatically turned on:
● Vehicle speed is above approximately 40 km/h (25 mph).
● The area ahead of the vehicle is dark.
● There are no oncoming or preceding vehicles with headlights or tail
lights turned on.
● There are few streetlights on the road ahead.
If any of the following conditions are fulfilled, high beam will be auto-
matically turned off:
● Vehicle speed drops below approximately 30 km/h (19 mph).
● The area ahead of the vehicle is not dark.
● Oncoming or preceding vehicles have headlights or tail lights
turned on.
● There are many streetlights on the road ahead.
■Switching to low beam
Pull the lever to original posi-
tion.
The Automatic High Beam indi-
cator will turn off.
Push the lever away from you to
activate the Automatic High
Beam system again.
High beam automatic turning on or off conditions
Turning the high beam on/off manually

3164-5. Toyota Safety Sense
YARIS_F_OM_Europe_OM52A54E■
Switching to high beam
Press the Automatic High
Beam switch.
The Automatic High Beam indi-
cator will turn off and the head-
light high beam indicator will
turn on.
Press the switch to activate the
Automatic High Beam system
again.
■The Automatic High Beam can be operated when
Vehicles without a smart entry & start system
The engine switch is in the “ON” position.
Vehicles with a smart entry & start system
The engine switch is in IGNITION ON mode.
■Front sensor detection information
●High beam may not be automatically turned off in the following situations:
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another
• When oncoming or preceding vehicles are hidden from sight due to
repeated curves, road dividers or roadside trees
●High beam may be turned off if an oncoming vehicle that is using fog lights
without using the headlights is detected.
●House lights, street lights, red traffic signals, and illuminated billboards or
signs may cause the high beam to turn off.
●The following factors may affect the amount of time taken to turn high beam
on or off:
• The brightness of headlights, fog lights, and tail lights of oncoming and
preceding vehicles
• The movement and direction of oncoming and preceding vehicles
• When a oncoming or preceding vehicle only has operational lights on one
side
• When a oncoming or preceding vehicle is a two-wheeled vehicle
• The condition of the road (gradient, curve, condition of the road surface,
etc.)
• The number of passengers and amount of luggage

3174-5. Toyota Safety Sense
4
Driving
YARIS_F_OM_Europe_OM52A54E●High beam may be turned on or off when unexpected by the driver.
●In the situations below, the system may not be able to correctly detect the
surrounding brightness levels, and may flash or expose nearby pedestrians
to the high beam. Therefore, you should consider turning the high beams on
or off manually rather than relying on the Automatic High Beam system.
• In bad weather (rain, snow, fog, sandstorms, etc.)
• The windshield is obscured by fog, mist, ice, dirt, etc.
• The windshield is cracked or damaged.
• The front sensor is deformed or dirty.
• The front sensor temperature is extremely high.
• Surrounding brightness levels are equal to those of headlights, tail lights
or fog lights.
• Vehicles ahead have headlights or tail lights that are either switched off,
dirty, are changing color, or are not aimed properly.
• When driving through an area of intermittently changing brightness and
darkness.
• When frequently and repeatedly driving ascending/descending roads, or
roads with rough, bumpy or uneven surfaces (such as stone-paved
roads, gravel tracks, etc.).
• When frequently and repeatedly taking curves or driving on a winding
road.
• There is a highly reflective object ahead of the vehicle, such as a sign or
a mirror.
• The back of a vehicle ahead is highly reflective, such as a container on a
truck.
• The vehicle’s headlights are damaged or dirty.
• The vehicle is listing or titling, due to a flat tire, a trailer being towed, etc.
• The driver believes that the high beam may be causing problems or dis-
tress to other drivers or pedestrians nearby.
■If the Automatic High Beam indicator comes on in yellow (vehicles with
monochrome display)
It may indicate a malfunction in the system. Contact any authorized Toyota
retailer or Toyota authorized repairer, or any reliable repairer.
■If “Headlight system malfunction. Visit your dealer.” is displayed on the
multi-information display (vehicles with color display)
The system may be malfunctioning. Have the vehicle inspected by any autho-
rized Toyota retailer or Toyota authorized repairer, or any reliable repairer.