2019 TOYOTA TACOMA display

189
2. SETUP
PHONE
7
1Display the phone top screen.
(P.162)
2Select .
3Select “Settings” .
1Display the “Phone/Message Settings”
screen. (P.178)
2Select “Phone Display Settings” .
3Select the desired item to be set.
INFORMATION
●Depending on the phone, these func-
tions may not be available.
DISPLAYING THE “Messaging
Settings” SCREEN IN A
DIFFERENT WAY
“Phone Display Settings”
SCREEN
No.Function
Select to change the incoming call
display.
“Full Screen” : When a call is re-
ceived, the hands-free screen is dis-
played and can be operated on the
screen.
“Drop-down” : A message is dis-
played on the upper side of the
screen.
Select to set display of the contact/
history transfer completion message
on/off.
Select to reset all setup items.
INFORMATION
● Depending on the phone, these func-
tions may not be available.

195
3. WHAT TO DO IF...
PHONE
7
In other situations
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
 Vehicles with-
out a smart key
system
The Bluetooth® con-
nection status is dis-
played at the top of
the screen each time
the engine switch is
turned to the “ACC”
or “ON” position.
 Vehicles with a
smart key sys-
tem
The Bluetooth® con-
nection status is dis-
played at the top of
the screen each time
the engine switch is
turned to ACCESSO-
RY or IGNITION ON
mode.
Connection confir-
mation display on
this system is set to
on.To turn off the dis-
play, set connection
confirmation display
on this system to off.
56

198
1. QUICK REFERENCE ................... 200
MAP SCREEN ..................................... 200
NAVIGATION OPTIONS SCREEN...... 202
2. MAP SCREEN OPERATION ....... 203
CURRENT POSITION DISPLAY ......... 203
MAP SCALE ........................................ 203
ORIENTATION OF THE MAP ............. 204
SWITCHING THE MAP MODE............ 204
SCREEN SCROLL OPERATION ........ 206
ADJUSTING LOCATION IN SMALL INCREMENTS................................... 207
3. MAP SCREEN INFORMATION ... 208
DISPLAYING MAP INFORMATION .... 208
DISPLAYING INFORMATION ABOUT THE ICON WHERE
THE CURSOR IS SET ...................... 210
STANDARD MAP ICONS .................... 211
4. TRAFFIC INFORMATION ............ 212
DISPLAYING TRAFFIC INFORMATION ON THE MAP .......... 214
1. DESTINATION SEARCH SCREEN .................................... 215
2. SEARCH OPERATION. ............... 217
SELECTING SEARCH AREA .............. 218
SETTING HOME AS DESTINATION ... 218
SETTING PRESET DESTINATIONS
AS DESTINATION ............................. 218
SEARCHING BY ADDRESS ................ 219
SEARCHING BY POINT OF INTEREST ......................................... 220
SEARCHING FROM PREVIOUS DESTINATIONS ................................ 224
SEARCHING BY ADDRESS BOOK .... 224
SEARCHING BY EMERGENCY .......... 225
SEARCHING BY INTERSECTION AND FREEWAY ................................ 225
SEARCHING BY MAP ......................... 227
SEARCHING BY COORDINATES ....... 227
3. STARTING ROUTE GUIDANCE ....... ....................... .. 228
STARTING ROUTE GUIDANCE.......... 228
PAUSING GUIDANCE ......................... 231
1BASIC OPERATION2DESTINATION SEARCH
8
NAVIGATION SYSTEM *

200
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “APPS” button, then select “Navigation” on the
“Apps” screen.
No.NameFunctionPage
2D North-up, 2D
heading-up or 3D
heading-up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
204
Options buttonSelect to display the “Navigation Options” screen.202
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.261
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance fo r traffic information.
When traffic information is received via HD, HD
mark is displayed on the right.
212
Scale indicatorThis figure indicate s the map scale.203

201
1. BASIC OPERATION
NAVIGATION SYSTEM
8
Zoom in/out but-
tonSelect to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.
203
Current position
button/voice
guidance button Select to display the current position address.
 Select to repeat voice guidance.203
Destination but-
tonSelect to display the “Destination” screen.215
Speed limit iconIndicates the speed limit on the current road. The
display of the speed limit icon can be set to on/off.203
Route informa-
tion bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the
route.
232
Route informa-
tion buttonSelect to change the display between the current
street name and the distance with the estimated
travel/arrival time.
233
No.NameFunctionPage

202
1. BASIC OPERATION
NAVIGATION OPTIONS SCREEN
The navigation options allow you to change map configurations, display/hide POI
icons, and edit the navigation routes. To display the “Navigation Options” screen,
press the “APPS” button, select “Navigation” on the “Apps” screen, and select
“Options” on the map screen.
No.FunctionPage
Select to change the map configuration.204
Select to change the displayed map information such as POI icon s,
route trace, speed limit, etc.208
Select to display the map version and coverage area.263
Select to edit the set route.238
Select to pause or resume route guidance.231
Select to display the over view of the entire route.233

203
1. BASIC OPERATION
NAVIGATION SYSTEM
8
2. MAP SCREEN OPERATION
1Press the “APPS” button.
2Select “Navigation” .
3Check that the current position map is
displayed.
1Select or to change the
scale of the map screen.
The scale indicator bar appears at the bot-
tom of the screen.
 Select and hold or to con-
tinue changing the scale of the map
screen.
 The scale of the map screen can also be
changed by selecting the scale bar
directly. This function is not available while
driving.
CURRENT POSITION
DISPLAY
To correct the current position manu-
ally:
P. 2 5 3
INFORMATION
● While driving, the current position mark
is fixed on the screen and the map
moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the battery disconnection, or on a
new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
MAP SCALE
INFORMATION
●The map scale is displayed above the
zoom in button at the bottom left of the
screen.

204
1. BASIC OPERATION
1Select , or .
 North-up screen
 Heading-up screen
 3D screen : North-up symbol
Regardless of the direction of vehicle trav-
el, north is always up.
: Heading-up symbol
The direction of vehicle travel is always up.
: 3D Heading-up symbol
The direction of vehicle travel is always up.
 The letter(s) beside this symbol indicate
the vehicle’s heading direction (e.g. N for
north).
1Select “Options” on the map screen.
2Select “Map Mode” .
3Select the desired configuration but-
ton.
ORIENTATION OF THE MAP
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by se-
lecting the orientation symbol dis-
played at the top left of the screen.
SWITCHING THE MAP MODE
No.FunctionPage
Select to display the single
map screen. 205
Select to display the dual
map screen.205
Select to display the com-
pass mode screen.206
Select to display the turn list
screen.236
Select to display the free-
way exit list screen.234