2019 TOYOTA SIENNA tow

473. When you think a malfunction has occurred
SIENNA_AAS_OM08030U_(U)
3
When trouble arises
If the AUTO ACCESS SEAT does not move
while outside the vehicle
If the AUTO ACCESS SEAT stops moving while raising, lowering or
rotating, or while it is outside the vehicle, you will not be able to close
the right-hand sliding door. Use the techniques outlined here t o stow
the seat inside the vehicle. If the AUTO ACCESS SEAT is occupie d,
move the occupant to a safe place before conducting the operation.
If the AUTO ACCESS SEAT does not move, first initialize the sea t
position information.
Shift the shift lever to P.
Open the right-hand sl iding door fully.
Unbuckle the seat bel t if it is buckled.
If the AUTO ACCESS SEAT does not move even when the
switches are pressed, check and replace the fuses as necessary.
( P. 38)
If the AUTO ACCESS SEAT still does not move even after the
fuses have been checked and replaced, have the seat inspected
by your Toyota dealer.
Initializing the seat position information
1
2
3

503. When you think a malfunction has occurred
SIENNA_AAS_OM08030U_(U)
Press the rear side of the seat
position adjustment switch on
the right-hand side of the seat,
and slide the AUTO ACCESS
SEAT toward the rear of the
vehicle by 2 in. (5 cm).
If the rear side of the seat position
adjustment switch is pressed and
held while the lower side of the
seat raise/lower switch is being
pressed, the AUTO ACCESS
SEAT will slide towards the front of
the vehicle.
Press the forward side of the
seat position adjustment switch
on the right-hand side of the
seat, and rotate the AUTO
ACCESS SEAT toward the
inside of the vehicle until the
beep sounds.
If the forward side of the seat posi-
tion adjustment switch is pressed
and held while the lower side of the
seat raise/lower switch is being
pressed, the AUTO ACCESS
SEAT will rotate to the outside of
the vehicle.
5
6

513. When you think a malfunction has occurred
SIENNA_AAS_OM08030U_(U)
3
When trouble arises
Press the rear side of the seat
position adjustment switch on
the right-hand side of the seat,
and slide the AUTO ACCESS
SEAT toward the rear of the
vehicle until the beep sounds.
If the rear side of the seat position
adjustment switch is pressed and
held while the lower side of the
seat raise/lower switch is being
pressed, the AUTO ACCESS
SEAT will slide towards the front of
the vehicle.
Press and hold the rear side of
the seatback angle adjustment
switch on the right-hand side of
the seat until the seatback auto-
matically stops moving.
If the seatback does not move, pro-
ceed to step .
7
8
9

573. When you think a malfunction has occurred
SIENNA_AAS_OM08030U_(U)
3
When trouble arises
Turn the power sliding door main switch off and close the right -hand
sliding door manually.
Have the seat inspected by your Toyota dealer immediately.
The power sliding door will not operate if the AUTO ACCESS SEAT has
been stowed inside the vehicle manually.
For information regarding the power sliding door, refer to the “OWNER’S
MANUAL”.
Contact your T oyota dealer.
?Removing and installing the unit cover clip
?Alarm sound
If an attempt is made to close the right-hand sliding door whil e stowing the
AUTO ACCESS SEAT inside the vehicle, beep will sound.
?When the AUTO ACCESS SEAT has been stowed manually
The shift lever cannot be shifted from P. Shift the shift lever while pressing the
shift lock override button. The vehicle can be driven even thou gh the beep will
continue to sound. For details, refer to the “OWNER’S MANUAL”.
If the AUTO ACCESS SEAT does not move and the beep does
not sound even when the switch is pressed
To remove
Press the core of the clip and remove
the clip.
To install
Push up the center portion, insert the
clip and press the core of the clip.
15
1
2

583. When you think a malfunction has occurred
SIENNA_AAS_OM08030U_(U)
WARNING
?When stowing the AUTO ACCESS SEAT manually
Do not put your feet or hands into the AUTO ACCESS SEAT stowage
space.
Your feet or hands may be caught in the movable parts of the AUTO
ACCESS SEAT, which could cause injuries.
?When the AUTO ACCESS SEAT has been stowed manually
?The seat is not locked and therefore could move during driving. Do not sit
in the AUTO ACCESS SEAT until repairs have been completed.
?Make sure the combination wrench is securely in place in its st orage loca-
tion to reduce the possibility of personal injury in the event of a sudden
braking, sudden swerving or an accident.
NOTICE
?To prevent loss of components
Put any removed components into a bag, and be careful not to lo se them.