2019 TOYOTA RAV4 sensor
[x] Cancel search: sensorPage 3 of 64
1
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
INDEX
Engine maintenance 11
Fuel tank door release & cap 10
Hood release 10
Indicator symbols 6-7
Instrument cluster 5
Instrument panel 2-4
Instrument panel light control 11
Keyless (and remote) entry
1 8-9
Smart Key system1 9
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONSFEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ (TSS)
Air conditioning/heating 19
Audio 23
Auto lock/unlock
1 12
Automatic transmission 12
Bird’s Eye View Camera
with Perimeter Scan function 28
Blind Spot Monitor with Rear
$ S P T T 5 S B G m D " M F S U # 4 . X 3 $ 5 "
Clock 20
Cup holders 26
Door locks 14
Door-Power Liftgate 18
Downhill assist control system 28
Driving mode select 32-33
Electric parking brake 13
Garage door opener (Homelink
®)3 35
Intuitive Parking Assist 30
Lights
1,2 & turn signals1 16-17
Moonroof 20
Multi-Information Display (MID)
2 25
Multi-terrain select 34
Panoramic moonroof 21
1 B S L J O H 4 V Q Q P S U # S B L F 1 , 4 #
functions 30
Power outlets-12V DC 26
Power outlets- 120V AC
26
Qi wireless charger 27
Rear view monitor system 29
Seat adjustments-Front 15
Seat adjustments-Rear 15
Seat heaters/ventilators 22
Seats-Head restraints 15Steering lock release 14
Steering wheel-Heater 22
Steering wheel switches &
U F M F Q I P O F D P O U S P M T # M V F U P P U I
®
Stop & Start system 31
Tilt & telescopic steering wheel 14
USB charg-ports 27
USB media/AUX Port 23
7 F I J D M F 4 U B C J M J U Z $ P O U S P M 7 4 $
TRAC and Trailer sway control
OFF switch 33
Windows-Power 17
Windshield wipers & washers 17
" V U P N B U J D ) J H I # F B N T " ) #
Full-Speed Range Dynamic Radar
$ S V J T F $ P O U S P M % 3 $ $
Lane Departure Alert with Steering
" T T J T U - % " X 4 "
- B O F 5 S B D J O H " T T J T U - 5 "
Pre-Collision System with Pedestrian
% F U F D U J P O 1 $ 4 X 1 %
Quick overview-
Toyota Safety Sense
™ 5 4 4
36
3 P B E 4 J H O " T T J T U 3 4 "
Sensors 37
BLUETOOTH® DEVICE
PAIRING SECTION
58-60 Floor mat installation 57
Rear door child safety locks 53
Safety Connect
® 55
Seat belts 53
Seat belts-Shoulder belt anchor 53
Spare tire & tools 54
Star Safety System
TM 56-57
Tire Pressure Monitoring
X B S O J O H
4 Z T U F N 5 1 . 4
Page 19 of 64
17
Windows-Power
Windshield wipers & washers
Front fog lights come on only when the headlights are on low beam.
Turn OFFON
FRONT
*Intermittent windshield wiper
frequency adjustment Rotate to
increase/decrease wipe frequency.* Rain-sensing windshield wiper Rotate
to increase/decrease sensor sensitivity. Intermittent
Adjust frequency* Adjust frequency*Single wipeSingle wipe
Interval wipeInterval wipe
Slow
Slow
FastFastPull to wash
and wipePull to wash
and wipe Off
Off
Rain-sensing (if equipped)
REAR
Single wipe
Interval wipe
Off
Push to Wash and wipe
All window auto up/down Push the switch completely down or pull it completely
up and release to fully open or close. To stop window partway, lightly push the
switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
Driver side
Up
Down
Window lock switch
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
' 0 ( - * ( ) 5 4 * ' & 2 6 * 1 1 & %
Page 20 of 64
18
FEATURES & OPERATIONS
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
1. When the liftgate reaches the desired height, push the rear liftgate close-button
P O U I F E P P S K B N P G U I F M J G U H B U F
P O D F 1 S F T T B O E I P M E U I F C V U U P O V O U J M U I F C V [ [ F S
T P V O E T U J N F T
2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button until it buzzer sounds 4 times, and continue to hold until
it buzzes again -then let go. Push the same button to close the liftgate. When you
next open the liftgate it will open to the maximum height.
3. To set the height using the Multi-Information Display, press “
” or “” meter
control switches and select “
” from the MID. Press “” or “” and select
and then press “”. Select Opening Adjustment, then press “”. Select
E F T J S F E Q P T J U J P O I F J H I U P Q U J P O T U P D I P P T F G S P N
U I F O Q S F T T i
”.
For more details, refer to the Owner’s Manual.To automatically open/close Power Liftgate Quickly swipe your foot near the
lower center part of the rear bumper for within 1 second to trigger sensor. To
operate, make sure that the touchless sensor operation is enabled and that you are
carrying the remote.
Door-Power Liftgate (if equipped)
Instrument panel
Power Liftgate (back door)
Hands-Free, Foot-Activated Power Liftgate
(if equipped)
Open: Push and hold
Close: Push and hold again
(close only)
Sensor area
(open only)
Carry Smart
Key remote
PROGRAMMABLE POWER LIFTGATE
Page 31 of 64
29
The Blind Spot Monitor is a system that has two functions:
t 5 I F # M J O E 4 Q P U . P O J U P S G V O D U J P O B T T J T U T U I F E S J W F S J O N B L J O H U I F E F D J T J P O X I F O P
D I B O H F M B O F T
t 5 I F 3 F B S $ S P T T 5 S B G G J D " M F S U G V O D U J P O B T T J T U T U I F E S J W F S X I F O C B D L J O H V Q
The system is designed to use radar sensors to detect vehicles traveling in the
Rav4’s blind spot. If a vehicle is detected, the driver will be alerted via the outside
rear view side mirror indicators.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the screen
contrast and brightness.
Refer to the Owner‘s Manual for limitations and more details on this system.
Refer to the Owner’s Manual for more information.
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
(if equipped)
Buzzer (RCTA only)
System ON/OFF
IndicatorsMonitor screen
display (RCTA
function only) IndicatorIndicator
Page 32 of 64
30
FEATURES & OPERATIONS
If the sensors detect an obstacle, the buzzer and MID or navigation system display
informs the driver of the approximate position and distance of the obstacle by
J M M V N J O B U J O H D P O U J O V P V T M Z G B S
P S C M J O L J O H O F B S
% F Q F O E J O H P O Z P V S & O U V O F
Page 39 of 64
37
Radar sensorCamera sensor
Sensors
TSS combines an in-vehicle camera mounted in front of the inside rear view mirror and
a radar mounted in the front grill. These sensors support the driver assist systems.
The Pre-Collision System uses a radar sensor and camera sensor to help detect a
vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance that
this system can provide, do not overly rely on this system. This system will not prevent
collisions or lessen collision damage or injury in every situation. Do not use PCS
instead of normal braking operations under any circumstances. Do not attempt to test
the operation of the Pre-Collision System yourself, as the system may not operate or
engage, possibly leading to an accident. In some situations, such as when driving in
inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a
curve and for a few seconds after driving on a curve, a vehicle may not be detected
by the radar and camera sensors, preventing the system from operating or engaging
properly.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a buzzer
will sound and a warning message will be displayed on the Multi-Information Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional braking
force using Brake Assist. This system may prime the brakes and may apply greater
braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Page 40 of 64
38
TOYOTA SAFETY SENSE™
1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . $ 0 / 5 * / 6 & %
Refer to the Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it. Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the possibility
of a frontal collision with a preceding vehicle is extremely high, the system may
automatically apply the brakes, reducing speed in order to help the driver reduce the
impact and in certain cases avoid the collision.
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitasions and information.Under certain conditions, the PCS system included with the TSS package may
also help to detect a pedestrian in front of your vehicle using the in-vehicle camera
and lasers. The in-vehicle camera of PCS detects a potential pedestrian or bicyclist
based on size, profile, and motion of the detected pedestrian or bicyclist. However,
a pedestrian or bicyclist may not be detected depending on the conditions,
including the surrounding brightness and the motion, posture, size, and angle of
the potential detected pedestrian or bicyclist, preventing the system from operating
or engaging.
PCS PEDESTRIAN DETECTION
Page 51 of 64
49
" % + 6 4 5 * / ( % * 4 5 " / $ &
To change the vehicle-to-vehicle distance
Push the “
” button to cycle
through the settings, which will
change progressively.
This mode employs a radar sensor to detect the presence of a preceding vehicle
V Q U P B Q Q S P Y J N B U F M Z G U N
B I F B E
E F U F S N J O F T U I F D V S S F O U W F I J D M F U P W F I J D M F
following distance and operates to maintain a preset following distance from the
vehicle ahead. These distances vary based on vehicle speed.
LONG
(default setting)MIDDLESHORT
Note: Vehicle-to-vehicle distance will close in when traveling on long downhill
slopes.
Preceding vehicle
mark
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
(1) (2) (3)
Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-to-
vehicle distance can also be set by operating the vehicle-to-vehicle distance
control.
Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears
When a vehicle is detected running ahead of you, the system automatically
decelerates your vehicle. When a greater reduction in vehicle speed is
O F D F T T B S Z
U I F T Z T U F N B Q Q M J F T U I F C S B L F T U I F C S B L F M J H I U T X J M M D P N F P O B U U I J T
U J N F
5 I F T Z T U F N X J M M S F T Q P O E U P D I B O H F T J O U I F T Q F F E P G U I F W F I J D M F B I F B E
in order to maintain the vehicle-to-vehicle distance set by the driver. A warning
tone warns you when the system cannot decelerate sufficiently to prevent your
vehicle from closing in on the vehicle ahead.