2019 TOYOTA MIRAI ignition
[x] Cancel search: ignitionPage 28 of 56
26
FEATURES & OPERATIONSIntuitive parking assist
* G U I F T F O T P S T E F U F D U B O P C T U B D M F
U I F C V [ [ F S B O E . * % E J T Q M B Z J O G P S N T U I F E S J W F S P G
the approximate position and distance of the obstacle by illuminating co\
ntinuously
G B S
P S C M J O L J O H O F B S
Note: Use
, and of the meter control switches to select
and in the Multi-Information Display (MID) to change settings. The
system will continue in the last state it was in (ON or OFF) when the ignition is
turned on again.
Refer to the Owner’s Manual for more details.
Front
center sensor
Rear
center sensor
Corner sensors
(front)
Corner sensors
(front)
Corner sensors
(rear) Corner sensors
(rear)
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 2610/22/18 1:28 PM
Page 29 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 27
Garage door opener (Homelink®)*
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc\
.
Refer to “Gara](/manual-img/14/42621/w960_42621-28.png "TOYOTA MIRAI 2019 Owners Manual (in English) 27
Garage door opener (Homelink®)*
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc\
.
Refer to “Gara")
27
Garage door opener (Homelink®)*
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc\
.
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manua\
l for more details.
' P S Q S P H S B N N J O H B T T J T U B O D F
D P O U B D U ) P N F - J O L
® B U
P S W J T J U I U U Q
www.homelink.com.
* HomeLink® is a registered trademark of Gentex Corporation.
Homelink® indicator light
Homelink® icon -
illuminates while operating
Garage door operation indicatorsButtons
Parking Support Brake function
(for static object)
(if equipped)
When a collision may occur with an obstacle while parking or traveling a\
t low
speeds, when the vehicle suddenly moves forward due to mistaken accelera\
tor
pedal operation, or when the vehicle moves due to the wrong shift positi\
on being
selected, the sensors detect obstacles to the front or rear in the trave\
ling direction
of the vehicle, and the system operates to lessen impact with obstacles \
such as
walls, and reduce resulting damage.
CHANGE SETTINGS
Note: Use, and of the meter control switches to select
and
in the Multi-Information Display (MID) to change settings. The system
will continue in the last state it was in (ON or OFF) when the ignition is turned
on again.
Refer to the Owner‘s Manual for more details on this system.
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 2710/22/18 1:28 PM
Page 35 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 33
CHANGING PRE-COLLISION ALERT TIMING
% * 4 " # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far
Mi](/manual-img/14/42621/w960_42621-34.png "TOYOTA MIRAI 2019 Owners Manual (in English) 33
CHANGING PRE-COLLISION ALERT TIMING
% * 4 \" # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far
Mi")
33
CHANGING PRE-COLLISION ALERT TIMING
% * 4 " # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far
Middle
(default)
Near
1 S F T T i” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select from the MID and then press
“
”. The setting screen is displayed.
1 S F T T i
” each time to change the setting. Each time it is pressed, the
S F T Q P O T F U P U I F 1 $ 4 B M F S U U J N J O H D I B O H F T B T T I P X O B C P W F : P V D B O press “
” to
go back to the menu.
Note: PCS is enabled each time the ignition switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” and “” switches to change the setting.
1 S F T T i
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON
mode.
Refer to a Toyota Owner’s Manual for additional information on PCS op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3310/22/18 1:28 PM
Page 36 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 34
TOYOTA SAFETY SENSE™
LDA in TSS uses an in-vehicle camera designed to detect visible white an\
d yellow
lane markers or road edge in front of the vehicle and the vehicle’s p\
osition on the
r](/manual-img/14/42621/w960_42621-35.png "TOYOTA MIRAI 2019 Owners Manual (in English) 34
TOYOTA SAFETY SENSE™
LDA in TSS uses an in-vehicle camera designed to detect visible white an\
d yellow
lane markers or road edge in front of the vehicle and the vehicle’s p\
osition on the
r")
34
TOYOTA SAFETY SENSE™
LDA in TSS uses an in-vehicle camera designed to detect visible white an\
d yellow
lane markers or road edge in front of the vehicle and the vehicle’s p\
osition on the
road. If the system determines that the vehicle is starting to unintenti\
onally deviate
from its lane, the system alerts the driver with an audio and visual ale\
rt. When the
alerts occur, the driver must check the surrounding road situation and c\
arefully
operate the steering wheel to move the vehicle back to the center part o\
f their lane.
- % " J T E F T J H O F E U P G V O D U J P O B U T Q F F E T P G B Q Q S P Y J N B U F M Z N Q I L N I
P S I J H I F S
on relatively straight roadways.
* O B E E J U J P O U P U I F B M F S U G V O D U J P O
- % " X 4 " B M T P G F B U V S F T B T U F F S J O H B T T J T U
function. When enabled, if the system determines that the vehicle is on \
a path to
unintentionally depart from its lane, the system may provide small corrective steering
inputs to the steering wheel for a short period of time to help keep the\
vehicle in its
lane.
If the vehicle repeatedly deviates from the lane, the vehicle drifts wit\
hin the lane due
to inattention, or the driver abruptly operates the steering wheel after\
an inattentive
period, when enabled, the vehicle sway warning function alerts the drive\
r with an
audio and visual alert, urging them to take a break.
Lane Departure Alert with Steering Assist
(LDA w/SA)
5 6 3 / * / ( 5 ) & - % " 4 : 4 5 & . 0 / 0 ' '
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
Press to ONMulti-Information Display
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3410/22/18 1:28 PM
Page 38 of 56
36
" % + 6 4 5 * / ( - % " " - & 3 5 4 & / 4 * 5 * 7 * 5 :
DISABLING STEERING ASSIST
5 I F E S J W F S D B O B E K V T U U I F T F O T J U J W J U Z P G U I F - % " X B S O J O H
G V O D U J P O G S P N U I F
. V M U J * O G P S N B U J P O % J T Q M B Z . * %
D V T U P N J [ B U J P O T D S F F O High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
TOYOTA SAFETY SENSE™
4 8 " : 8 " 3 / * / ( 4 : 4 5 & .
SWS is a function of LDA and is designed to detect swaying based on the \
vehicle
location in the lane and the driver’s steering wheel operation. To he\
lp prevent
T X B Z J O H
U I F T Z T U F N B M F S U T U I F E S J W F S V T J O H B C V [ [ F S T P V O E B O E B X B S O J O H E J T Q M B Z T
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3610/22/18 1:28 PM
Page 39 of 56
37
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
" % + 6 4 5 * / ( 4 8 " : " - & 3 5 4 & / 4 * 5 * 7 * 5 :
% * 4 " # - * / ( - % " 4 8 " : 8 " 3 / * / ( 4 : 4 5 & .
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3710/22/18 1:28 PM
Page 42 of 56
40
TOYOTA SAFETY SENSE™
4 8 * 5 $ ) * / ( 5 0 $ 0 / 4 5 " / 5 4 1 & & % $ 3 6 * 4 &
$ 0 / 5 3 0 - . 0 % &
4 & 5 5 * / ( $ 0 / 4 5 " / 5 4 1 & & % $ 3 6 * 4 &
$ 0 / 5 3 0 -
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic
deceleration via the cruise control is not possible, the display will flash and the
buzzer will sound to alert the driver. An example of this would be if another driver
cuts in front of you while you are following a vehicle. Depress the brake pedal to
ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC “ w
Q V T I 0 / 0 ' ' C V U U P O U P U V S O U I F T Z T U F N P G G
G J S T U
U I F O Q V T I B O E I P M E 0 / 0 ' ' C V U U P O G P S B U M F B T U T F D P O E T U P T X J U D I
Note: When the ignition is turned off, it will automatically default to DRCC.
Refer to a Toyota Owner’s Manual for additional information on DRCC o\
peration,
settings adjustments, limitations, and precautions before attempting to \
use it.
1.5 seconds
Set
Acceleration when there are no longer any preceding vehicles driving
slower than the set speed The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SET SPEED on
page 38.
" % + 6 4 5 * / ( % * 4 5 " / $ & $ 0 / 5 * / 6 & %
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 4010/22/18 1:28 PM
Page 44 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 42
TOYOTA SAFETY SENSE™
Road Sign Assist (RSA)
Road Sign Assist is designed to help ensure drivers are kept informed. T\
he RSA
T Z T U F N S F D P H O J [ F T T Q F D J G J D S P B E T J H O](/manual-img/14/42621/w960_42621-43.png "TOYOTA MIRAI 2019 Owners Manual (in English) 42
TOYOTA SAFETY SENSE™
Road Sign Assist (RSA)
Road Sign Assist is designed to help ensure drivers are kept informed. T\
he RSA
T Z T U F N S F D P H O J [ F T T Q F D J G J D S P B E T J H O")
42
TOYOTA SAFETY SENSE™
Road Sign Assist (RSA)
Road Sign Assist is designed to help ensure drivers are kept informed. T\
he RSA
T Z T U F N S F D P H O J [ F T T Q F D J G J D S P B E T J H O T V T J O H B G P S X B S E G B D J O H J O U F M M J H F O U D B N F S B U P
Q S P W J E F J O G P S N B U J P O U P U I F E S J W F S W J B B . V M U J J O G P S N B U J P O % J T Q M B Z . * %
* G U I F T Z T U F N
K V E H F T U I B U U I F W F I J D M F J T C F J O H E S J W F O P W F S U I F T Q F F E M J N J U
P S Q F S G P S N J O H B D U J P O T
prohibited by other support types of road signs, it alerts the driver us\
ing a warning
E J T Q M B Z B O E N B Z T P V O E B X B S O J O H C V [ [ F S
3 4 " % * 4 1 " :
4 6 1 1 0 3 5 & % 5 : 1 & 4 0 ' 3 0 " % 4 * ( / 4
SETTING RSA
When the driving assist systems
display is selected, a maximum of
2 signs can be displayed.Speed limit Stop
Do Not Enter : J F M E
When a tab other than the driving
assist systems display is selected,
P O M Z B S F D P H O J [ F E T Q F F E M J N J U T J H O P S
E P O P U F O U F S T J H O X I F O O P U J G J D B U J P O J T
O F D F T T B S Z
X J M M C F E J T Q M B Z F E
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
Note: If the ignition switch was last turned off while a speed limit sign was
displayed on the multi-information display, the same sign displays again when
the ignition switch is turned back ON.
Refer to the Owner’s Manual for additional information on RSA operati\
on, settings
adjustments, limitations, and precautions before attempting to use it.
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 4210/22/18 1:28 PM