240
5. SETUP
MIRAI_Navi_USA_OM62055U_19MY
No.FunctionPage
Select  to  set  unverified
roads  guidance  warning
on/off.
Select  to  set  IPD  road
(roads  that  are  not  com-
pletely digitized in our data-
base) guidance on/off.
Select to set the voice guid-
ance  for  the  next  street
name on/off.
Select  to  set  favorite  POI
categories that are used for
POI selection to display on
the map screen.
241
Select to adjust the current
position  mark  manually  or
to  adjust  miscalculation  of
the distance caused by tire
replacement.
241
Select  to  set  automatic
destination  list  info  on/off.
When  set  to  on,  the  esti-
mated time of arrival to the
registered  home  and  pre-
set  destinations  from  the
current position will be  dis-
played.
Select  to  set  automatic
zoom function on/off. When
it is enabled, as the vehicle
approaches  a  guidance
point,  the  map  will  change
to a detailed map automat-
ically.
Select  to  set  the  map  dis-
play color. 
*
Select  to  enable/disable
routes  sourced  from  the
Toyota Entune center.
220
Select  to  reset  all  setup
items.
*: This  function  is  not  available  in  some countries and areas.
No.FunctionPage 
         
        
        250
6. TIPS FOR THE NAVIGATION SYSTEM
MIRAI_Navi_USA_OM62055U_19MY
Accurate  current  position  may  not  be
shown in the following cases:
• When  driving  on  a  small  angled  Y-
shaped road.
• When driving on a winding road.
• When driving on a slippery road such as in sand, gravel, snow, etc.
• When driving on a long straight road.
• When freeway and surface streets run in parallel.
• After moving by ferry or vehicle carrier.
• When  a  long  route  is  searched  during high speed driving.
• When  driving  without  setting  the  current position calibration correctly.
• After  repeating  a  change  of  direction  by going  forward  and  backward,  or  turning
on a turntable in a parking lot.
• When  leaving  a  covered  parking  lot  or parking garage.
• When a roof carrier is installed.
• When driving with tire chains installed.
• When the tires are worn.
• After replacing a tire or tires.
• When  using  tires  that  are  smaller  or larger than the factory specifications.
• When  the  tire  pressure  in  any  of  the  4
tires is not correct. 
Inappropriate route guidance may occur in
the following cases:
• When  turning  at  an  intersection  off  the
designated route guidance.
• If  you  set  more  than  1  destination  but skip  any  of  them,  auto  reroute  will  dis-
play  a  route  returning  to  the  destination
on the previous route.
• When turning at an intersection for which there is no route guidance.
• When  passing  through  an  intersection for which there is no route guidance.
• During  auto  reroute,  the  route  guidance
may  not  be  available  for  the  next  turn  to
the right or left.
• During  high  speed  driving,  it  may  take  a long  time  for  auto  reroute  to  operate.  In
auto  reroute,  a  detour  route  may  be
shown.
• After  auto  reroute,  the  route  may  not  be changed.
• If  an  unnecessary  U-turn  is  shown  or announced.
• If  a  location  has  multiple  names  and  the
system announces 1 or more of them.
• When a route cannot be searched.
• If  the  route  to  your  destination  includes
gravel,  unpaved  roads  or  alleys,  the
route guidance may not be shown.
• Your  destination  point  might  be  shown
on the opposite side of the street.
• When  a  portion  of  the  route  has  regula- tions  prohibiting  the  entry  of  the  vehicle
that vary by time or season or other rea-
sons.
• The  road  and  map  data  stored  in  the
navigation  system  may  not  be  complete
or may not be the latest version.
 If  the  vehicle  cannot  receive  GPS  sig-
nals,  the  current  position  can  be
adjusted  manually.  For  information  on
setting  the  current  position  calibration:
P. 2 4 1
 After replacing a tire:  P. 2 4 2
INFORMATION
● This  navigation  system  uses  tire  turning
data  and  is  designed  to  work  with  fac-
tory-specified  tires  for  the  vehicle.
Installing  tires  that  are  larger  or  smaller
than  the  originally  equipped  diameter
may cause inaccurate display of the cur-
rent  position.  The  tire  pressure  also
affects the diameter of the tires, so make
sure that the tire pressure of all 4 tires is
correct.