2019 TOYOTA HIGHLANDER HYBRID check engine

5
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Front Fog light indicator4
Fuel tank door position
“READY” indicator
Pre-Collison System (PCS) warning1,2
Malfunction/Check Engine indicator1
Master warning1,2
Intelligent parking assist indicator4
Headlight low/high beam
indicator
Low fuel level warning
Parking brake warning
1
Slip indicator1,3
Security indicator
Tire Pressure Warning1
Turn signal indicator
Vehicle Stability Control (VSC) OFF
indicator1
2nd and 3rd row seat belt reminder
indicator (warning buzzer)
Vehicle proximity notification
system warning1
Land Departure Alert with Steering
Assist (LDA w/SA) indicator
[white/green/amber
3 indicator]
1
If the indicator does not turn off within a few seconds of starting the \
engine, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner\
’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.
49193b_MY19_Highlander_HV_QRG_V3_ML_0809.indd 58/13/18 4:18 PM

8
NOTE: To close, tighten until one click is heard. If the cap is not tightened
enough, Check Engine “
” indicator may illuminate.
Turn to openStore
Engage support rod
Pull When the fuel door cannot
be opened by pressing the
inside switch. Remove the
cover inside the luggage
compartment and pull the
lever.Pull up the auxiliary catch
lever and raise hood
The brightness level of the meters when the surroundings are bright (day mode)
and dark (night mode) can be adjusted individually. However,when in day mode,
adjusting the brightness level will also change the brightness level of \
night mode.
Fuel tank door release & cap
Hood release
Instrument panel light control
OVERVIEW
49193b_MY19_Highlander_HV_QRG_V3_ML_0809.indd 88/13/18 4:18 PM

33
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
(1) Press “” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select the setting function from the MID and then
press “
”. The setting screen is displayed.
(3) Select
and then press “.” The Pre-Collision System will be disabled. You
can press “
” to go back to the menu.
Note: The system is enabled each time the engine switch is turned to Ignition
On.
LDA in TSS-P uses an in-vehicle camera designed to detect visible white \
and yellow
lane markers in front of the vehicle and the vehicle’s position on th\
e road. If the
system determines that the vehicle is starting to unintentionally deviat\
e from its lane,
the system alerts the driver with an audio and visual alert. When the al\
erts occur, the
driver must check the surrounding road situation and carefully operate t\
he steering
wheel to move the vehicle back to the center part of their lane.
LDA is designed to function at speeds of approximately 32 MPH or higher \
on
relatively straight roadways.
In addition to the alert function, LDA w/SA also features a steering assist
function. When enabled, if the system determines that the vehicle is on \
a path to
unintentionally depart from its lane, the system may provide small corrective steering
inputs to the steering wheel for a short period of time to help keep the\
vehicle in its
lane.
Lane Departure Alert with Steering Assist
(LDA w/SA)
DISABLING PRE-COLLISION SYSTEM (PCS)
49193b_MY19_Highlander_HV_QRG_V3_ML_0809.indd 338/13/18 4:19 PM