2019 TOYOTA CAMRY display

19 If the sensors detect an obstacle, the buzzer and MID display informs the driver of
the approximate position and distance of the obstacle by illuminating continuously
(far) or blinking (near).
Note: Use
/, / and of the meter control switches to select
and
in the Multi-Information Display (MID) to change settings. The system
will continue in the last state it was in (ON or OFF) when the engine is started
again.
* Refer to “Intuitive parking assist” section in the Owner’s Manual for more details.
Note: Use/, / and of the meter control switches to select
and
in the Multi-Information Display (MID) to change settings. The system
will continue in the last state it was in (ON or OFF) when the engine is started
again.
Refer to the Owner‘s Manual for more details on this system.
INTELLIGENT PARKING ASSIST* (IF EQUIPPED)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Front
center sensor
Rear
center sensor Corner sensors
(front)Corner sensors
(front)
Corner sensors
(rear)Corner sensors
(rear)
Intelligent Clearance Sonar with Rear Cross
Traffic Braking (ICS w/RCTB)
(if equipped)
When parking, this available system scans for stationary objects, like walls or
lampposts. Should the system anticipate a collision, it will emit an audible and
visible alert, reduce engine or motor output, and automatically apply the brakes
if needed. If your vehicle is equipped with ICS, the RCTA system will also have a
braking function that may apply the vehicle’s brakes if the system detects crossing
vehicles while the Camry is backing up.
Note: Use/, / and of the meter control switches to select
and
in the Multi-Information Display (MID) to change settings. The system
will continue in the last state it was in (ON or OFF) when the engine is started
again.
Refer to the Owner‘s Manual for more details on this system.
System ON/OFF on the
Multi-Information Display.
CHANGE SETTINGS

20
FEATURES & OPERATIONS
Rear view monitor system
See-through view switch Moving view switchRotation pause switch Rotation pause switch
The Bird’s Eye View Camera with Perimeter Scan function assists the driver in
viewing the surroundings, when operating at low speeds or parking, by combining
front, side and rear cameras and displaying an overhead image on the Entune™
3.0 screen.
To view or turn OFF the screen, press the camera switch when the shift lever is in
the “P” position. It will display two angles, the Moving view and the See Through
view.

For limitations and more details, refer to section 6-3 in the “NAVIGATION AND
MULTIMEDIA SYSTEM OWNER’S MANUAL.”
Moving viewSee through view
Bird’s Eye View Camera
with Perimeter Scan Function
(if equipped)
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button
and select “Display” on the screen. Select “Camera” to adjust the screen
contrast and brightness.
Refer to the Navigation and Multimedia System Owner‘s Manual for limitations
and more details on this system.

21
Multi-Information Display (MID)
4.2” DISPLAY (IF EQUIPPED)
7” DISPLAY (IF EQUIPPED)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
(1) Drive information
(2) Audio system-linked display
(3) Driving assist system information
(1) Warning messages
(2) Eco-friendly driving information
(3) Driving assist system informationPush “meter control switches” to change information in the following:
Push “meter control switches” to change information in the following:
Refer to the Owner’s Manual for more details.(4) Warning messages
(5) Settings display
(4) Audio system-linked display
(5) Vehicle information
(6) Settings display
Indicators
Menu icons
Shift position Outside temperatureSpeed limit display
(with navigation system)
Clock Full-Speed DRCC and
Lane Departure Alert display
Previous screen
Previous screen
Speedometer IndicatorsDisplay areaMenu icons Shift position
Indicators
Enter/Select
Enter/Select
Scroll/search
screens
Scroll/search
screens
Odometer/trip
meter control
“ODO/TRIP” switch
Odometer/trip meter display
Display area Odometer/trip
meter control
display

22
Moonroof (if equipped)
Color Head-up display (HUD) (if equipped)
The head-up display can display the current vehicle speed and ECO driving
indicator in front of the driver. Also, it can display various types of information to
assist the driver.
Select “
” and then “” in the Multi-Information Display (MID) to access
Head-up display settings. And push “
,” to enter selection.
Refer to the Owner’s Manual for more details.
Driving assist system status/
navigation system-linked display area
(if equipped)
Recommended driving position
to minimize wind noise. Push once to open partway;
again to open completely.
FEATURES & OPERATIONS
SLIDING OPERATION
TILTING OPERATION
Lightly press either side of the moonroof switch while opening/tilting is in progress,
the moonroof stops partway.
Push once to open completely.
Shift position/speed limit display area
ECO driving indicator/Tachometer Information display areaVehicle speed display
TiltClose
OpenClose

26
ENTUNE™
3.0 AUDIO PLUS
ENTUNE™
3.0 PREMIUM (JBL®)1 AUDIO WITH DYNAMIC NAVIGATION & APP SUITE
1 If equipped
FEATURES & OPERATIONS
Audio
HOME Button
Access to Home screen.
Insert a disc in slot. Eject CD
Push to turn ON/OFF
and volume
Turn to change
radio station or
skip to next or
previous track.Touch screen display
ENTUNE™
3.0 AUDIO
AUDIO Button
Push to display audio
screen or access audio
functions.
SEEK Button
Seek station/CD track select
TRACK Button
Seek station/CD track select
MENU Button
Turn to tune radio stations
manually or select tracks
or files
PHONE Button
Push to display Bluetooth
® hands-free system.
MAP Button
Push to display the navigation
system.
MAP button: Push to display map screen or to repeat a voice guidance command.
(Entune
™ 3.0 Premium Audio only).
APPS Button
Access to traffic
and weather
HOME SCREEN - The home screen offers a two and three panel layout. Information and layout will vary
depending on selected set up.
NOTE: Concentrating on the road should always be your first priority while
driving. Do not use the EntuneTM 3.0 system if it will distract you.
9LVXDOO\PDWFK\RXUYHKLFOH

27
Audio switches
Multi-Information Display (MID) control switches
Phone switches
Microphone
Steering wheel switches
(Audio, MID & phone: Bluetooth®)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Volume controls
Return to
previous screen
Voice command switch/
Mobile Assistant access* Select/enterSeek
Bluetooth® technology allows dialing or receipt of calls without removing your hands
from the steering wheel or using a cable to connect the compatible telephone and
the system.
* Push and hold to access Mobile Assistant. When a compatible smartphone is
Bluetooth® connected push and hold the Voice command switch 2-3 seconds to
access Siri® Eyes Free.
Refer to the “Bluetooth
® Device Pairing Section” in this guide for more information
about phone connections and compatibility.
Refer to the “Navigation and Multimedia System Owner’s Manual” for more details.
“MODE” Push to turn audio ON and select an audio
mode. Push and hold to turn the audio OFF.
Receive/end call
NOTE: Concentrating on the road should always be your first priority while driving. Do not
use the hands-free phone system if it will distract you.
“/” or “/”
press to scroll screens,
change the displayed
content and move the
cursor.

29
1) Push “MENU” button next to the screen.
2) Select “Setup” or “General” in the touch screen to access the general settings
screen.
3) Select “Clock.”
4) Then select desired items to be reset.

Refer to the “Navigation and Multimedia System Owner’s Manual” for more details.
1 Entune™ 3.0 Premium Audio only2 Entune™ 3.0 Audio Plus/Entune™ 3.0 Premium Audio only
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Garage door opener (HomeLink®*) (if equipped)
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 5-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink
® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink®
is a registered trademark of Johnson Controls, Inc.
Buttons
Remote
HomeLink® indicator light
Garage door operation
indicators
Select to change time zone
Select to daylight savings
time ON/OFF/AUTO.1
Select to set to automatic
GPS adjustment of clock.2
Select to set hour display
to 12 or 24 hour time.
Clock

31
The Pre-Collision System uses a radar sensor and camera sensor to help detect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance
that this system can provide, do not overly rely on this system. This system will not
prevent collisions or lessen collision damage or injury in every situation. Do not use
PCS instead of normal braking operations under any circumstances. Do not attempt
to test the operation of the pre-collision system yourself, as the system may not
operate or engage, possibly leading to an accident. In some situations, such as
when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or
while driving on a curve and for a few seconds after driving on a curve, a vehicle
may not be detected by the radar and camera sensors, preventing the system from
operating or engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Refer to a Toyota Owner’s Manual for additional information on PCS w/PD operation,
settings adjustments, limitations, and precautions before attempting to use it. Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a
buzzer will sound and a warning message will be displayed on the Multi-Information
Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional
braking force using Brake Assist. This system may prime the brakes and may apply
greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the
possibility of a frontal collision with a preceding vehicle is extremely high, the
system may automatically apply the brakes, reducing speed in order to help the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection (PCS w/PD)
OVERVIEW )($785(6 23(5$7,216 72<27$6$)(7<6(16( 6$)(7< (0(5*(1&<)($785(6