2019 TOYOTA AYGO belt

631-2. Child safety
1
For safety and security
AYGO_OM_Europe_OM99R19E
●When installing a forward-
facing child seat, if there is a
gap between the child seat
and the seatback, adjust the
seatback angle until good
contact is achieved.
● If the seat belt shoulder
anchor is ahead of the child
seat belt guide, move the
seat cushion forward.
● When installing a junior seat, if the child in your child restraint
system is in a very upright position, adjust the seatback angle to
the most comfortable position. And if the seat belt shoulder
anchor is ahead of the child seat belt guide, move the seat cush-
ion forward.

641-2. Child safety
AYGO_OM_Europe_OM99R19E
◆Installing child restraint system using a seat belt
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
If installing the child restraint system to the front passenger seat
is unavoidable, refer to P. 56 for front passenger seat adjustment.
If the head restraint interferes with the child restraint system
installation and the head restraint can be removed, remove the
head restraint. Otherwise, put the head restraint in the upper
most position. ( P. 156)
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Securely
fix the seat belt to the child
restraint system in accor-
dance to the directions
enclosed with the child
restraint system.
If your child restraint system
is not equipped with a lock-
off (a seat belt locking fea-
ture), secure the child
restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely. ( P. 6 6 )

651-2. Child safety
1
For safety and security
AYGO_OM_Europe_OM99R19E
◆Removing a child restraint system installed with a seat belt
Press the buckle release button and fully retract the seat belt.
When releasing the buckle, the chil d restraint system may spring up due
to the rebound of the seat cushion. Release the buckle while holding
down the child restraint system.
Since the seat belt automatically reels itself, slowly return it to the stow-
ing position.
■ When installing a child restraint system
You may need a locking clip to install the child restraint system. Follow the
instructions provided by the manufacturer of the system. If your child restraint
system does not provide a locking clip, you can purchase the following item
from any authorized Toyota retailer or Toyota authorized repairer, or any reli-
able repairer: Locking clip for child restraint system
(Part No. 73119-22010)

661-2. Child safety
AYGO_OM_Europe_OM99R19E
WARNING
■When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
● Do not allow children to play with the seat belt. If the seat belt becomes
twisted around a child’s neck, it may lead to choking or other serious inju-
ries that could result in death. If this occurs and the buckle cannot be
unfastened, scissors should be used to cut the belt.
● Ensure that the belt and plate are securely locked and the seat belt is not
twisted.
● Shake the child restraint system left and right, and forward and backward
to ensure that it has been securely installed.
● After securing a child restraint system, never adjust the seat.
● When a junior seat is installed, always ensure that the shoulder belt is
positioned across the center of the child’s shoulder. The belt should be
kept away from the child’s neck, but not so that it could fall off the child’s
shoulder.
● Follow all installation instructions provided by the child restraint system
manufacturer.

731-2. Child safety
1
For safety and security
AYGO_OM_Europe_OM99R19E
■Anchor brackets (for top strap)
Anchor brackets are provided
for the each rear seat.
Use anchor brackets when fix-
ing the top strap.
WARNING
■ When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
● After securing a child restraint system, never adjust the seat.
● When using the lower anchors, be sure that there are no foreign objects
around the anchors and that the seat belt is not caught behind the child
restraint system.
● Follow all installation instructions provided by the child restraint system
manufacturer.
Using an anchor bracket (for top strap) (vehicles with rear seats)
Anchor
bracket
Top strap

741-2. Child safety
AYGO_OM_Europe_OM99R19E
■Fixing the top strap to the anchor bracket
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
Vehicles with a luggage cover: Remove the luggage cover.
(P. 339)
Adjust the head restraint to
the upmost position.
If the head restraint interferes
with the child restraint system or
top strap installation and the
head restraint can be removed,
remove the head restraint.
(P. 156)
Secure the child restraint system using the seat belt or ISOFIX
rigid anchors.
Latch the hook onto the
anchor bracket and tighten
the top strap.
Make sure the top strap is
securely latched. ( P. 6 6 )
When installing the child
restraint system with the head
restraint being raised, be sure to
have the top strap pass under-
neath the head restraint.
Top strap
Anchor bracket

751-2. Child safety
1
For safety and security
AYGO_OM_Europe_OM99R19E
WARNING
■When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
● Firmly attach the top strap and make sure that the belt is not twisted.
● Do not attach the top strap to anything other than the anchor bracket.
● After securing a child restraint system, never adjust the seat.
● Follow all installation instructions provided by the child restraint system
manufacturer.
● When installing the child restraint system with the head restraint being
raised, after the head restraint has been raised and then the anchor
bracket has been fixed, do not lower the head restraint.

972. Instrument cluster
2
Instrument cluster
AYGO_OM_Europe_OM99R19E
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*1Brake system warning
light ( P. 417)
*1Electric power steering
system warning light
( P. 419)
*1
Charging system
warning light ( P. 417)
*1, 2, 4
PCS warning light
( P. 420)
*1
Low engine oil pressure
warning light ( P. 417)
*2, 3
(Yellow)
Speed limiter indicator
( P. 420)
*1High engine coolant
temperature warning
light ( P. 417)
*1, 2, 4
Stop & Start cancel
indicator ( P. 420)
*1“STOP” warning light
( P. 418)
*1
Slip indicator light
( P. 421)
*1, 2Multi-mode manual
transmission
warning light ( P. 418)
*2
(Yellow)
LDA indicator (P. 421)
*1, 2, 4
Heat clutch warning light
( P. 418)
*2, 7
(Yellow)
Lane marker indicators
( P. 421)
*1
Malfunction indicator
lamp ( P. 419)
*2, 5
(Yellow)
Smart entry & start
system indicator light
( P. 421, 425)
*1SRS warning light
( P. 419)
Open door warning light
( P. 421)
*1
ABS warning light
( P. 419)
Driver’s and front pas-
senger’s seat belt
reminder light ( P. 421)