2019 TOYOTA 4RUNNER stop start

3
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY
FEATURES
OVERHEAD CONSOLE INSTRUMENT PANEL
1 If equipped2 For details, refer to the “Navigation and Multimedia System Owner’s Manual” and “2019
Entune™ Audio Quick Reference Guide.”
VSC off switchVSC off switchActive traction control switch1
Active traction control switch1
Downhill Assist Control system (DAC) switch1
Rear differential lock switch1
Multi-terrain Select switch1
Crawl Control switch1
Windshield wiper and washer controls
Multi-Information Display (MID)
Emergency flasher switch
Clock
Audio system2/navigation system2
USB media/AUX port2
Seat heater1/ventilator switches1
Manual or Automatic air
conditioning controls1
Front-wheel drive control lever1
Front-wheel drive control switch1/Four-wheel drive control switch1
“ENGINE START STOP” button (Smart Key)1
Ignition switch (standard key)1
Power outlet-12V DC
Part-time 4WD
Type AType B
Part-time 4WD/ full-time 4WD
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 37/13/18 8:21 PM

7
OVERVIEW
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Off - All systems OFF. Emergency flashers can be used.
Accessory – Some electrical components can be used.
On - All electrical components can be used.
Without depressing the brake pedal, pressing the “ENGINE START STOP” switch
will change the operation mode in succession from:
NOTE: The Smart Key must be carried to enable the start function. With gear
shift lever in Park and the brake pedal depressed, push the “ENGINE START
STOP” switch.
Push
Green indicator ON
PullStore
NOTE: Tighten until one click is heard. If the cap is not properly sealed,
Check Engine “” indicator may illuminate.
START FUNCTION
POWER (WITHOUT STARTING ENGINE)
Smart Key system (if equipped)
Fuel tank door release & cap
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 77/13/18 8:21 PM

9
OVERVIEW
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
* The ignition/“ENGINE START STOP” switch must be “ON” and the brake pedal
depressed to shift from Park.
Shift the shift lever to “S” position from “D” position.
+: Upshift (push and release)
--: Downshift (pull and release)
Downshifting increases power going uphill, or provides engine braking downhill. For
best fuel economy during normal driving conditions, always drive with the shift lever
in the “D” position.
Park*
Reverse
Neutral
Drive
P
R
N
D
“S” mode
Set: Depress Release: Depress again
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-Doors lock when the vehicle speed goes above approximately 12 mph.
Driver’s door linked door unlocking function
-(Without a Smart Key system) Doors unlock when the engine switch is set from
“ON” to “ACC” or “LOCK” within 10 seconds of opening the driver’s door.
-(With a Smart Key system) Doors unlock when the engine switch is set to OFF
within 10 seconds of opening the driver’s door.
Refer to the Owner’s Manual for more details.
Auto lock/unlock
Automatic transmission
Parking brake
“S” (SEQUENTIAL) MODE
FEATURES & OPERATIONS
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 97/13/18 8:21 PM

22
NOTE: Designed for car accessories. Ignition switch/“ENGINE START STOP”
switch must be in the “ACC” or “ON” position to be used.
Outside
With 120V AC outletWithout 120V AC outlet
Inside
FEATURES & OPERATIONS
Power outlets-12V DC
CENTER PANEL
CONSOLE BOX
LUGGAGE COMPARTMENT
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 227/13/18 8:21 PM

30
SAFETY & EMERGENCY FEATURES
Star Safety System™
VEHICLE STABILITY CONTROL (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
ANTI-LOCK BRAKE SYSTEM (ABS)
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. EBD responds to sudden stops by
redistributing brake force to enhance the braking effectiveness of all four wheels.
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-
lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force Distribution
(EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Vehicle Stability
Control (VSC).
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
SMART STOP TECHNOLOGY (SST)
Smart Stop Technology automatically reduces engine power when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 307/13/18 8:22 PM